Deburring
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Send us aged brass knobs from San Bernardino and we'll bring them back with a worn in, antique look. We choose the media for the metal, check every batch for lodged media and pack the brass knobs by part number before they go home insured.
From rough to right, for aged brass knobs
Small parts are what tumbling does best. A few dozen hinges, a box of machined fittings or a production run of buckles all go through the same way, and they come out feeling like they belong together. Parts can reach us from San Bernardino, Highland, Colton and Rialto, or from any other town in the country.
Most of the work starts with a conversation. You tell us what the aged brass knobs are made of, how many there are and what you want them to look like. We tell you honestly if tumbling is the right fit, or if a handful of pieces would be better polished by hand.
Once you're happy with the plan, we run a sample first. That gives you a look at the finish before we commit the rest of your aged brass knobs, and we can send photos of the sample when you need them. It keeps surprises to a minimum on both sides.
Not sure which finish your parts need? Send photos, a part count and what the parts are used for. We will suggest a finish, run a few samples if needed, and send back a written quote.
Pick one finish or combine a few. We often smooth first, then burnish or age the piece, and we plan the steps around the aged brass knobs you ship from San Bernardino.
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Sharp corners are gently rounded and tool marks are softened. Parts feel better in the hand and plating covers edges more evenly.
Steel media presses the surface smooth instead of cutting it, bringing up a bright, clean shine on brass, copper and steel without buffing each piece.
A soft satin surface with worn, rounded edges that looks naturally aged. Popular on brass hinges, pulls, knobs and small decorative castings.
Tumbling first removes scale, light rust and surface marks, so copper, nickel or chrome goes on smoother and the finish looks better for less cost.
Plated or darkened parts are tumbled lightly so the high points wear through and glow, giving hardware a used, lived in character.
Drag the handle across each photo to see parts as they went into the tumbler and as they came out.
Before
Rough castings with parting lines and a dull, uneven skin. Tumbled in stages to smooth the surface and soften the edges into an even satin glow.
Before
Fresh off the machine with burrs, sharp corners and cutting oil. Deburred, edge smoothed and dried spot free, ready to go straight to plating.
Before
Bright, brand new brass that looked out of place in an old home. Darkened and tumbled so the edges wear back to brass, like decades of use.
Over three decades of plating, one shop in Oceanside.
Every part is stripped, prepped, plated and inspected in our own building, and our work comes with a 12 month workmanship guarantee. Send photos and we'll take it from there.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Each method has its place. The right one depends on how many parts you have, their shape and the look you want.
The small pieces that tumble with your parts decide how much metal is removed and how the surface looks. We choose them part by part.
Heavy and abrasive. Used to take down burrs, casting skin and tool marks on steel, stainless and other hard metals.
Lighter and gentler, so it smooths brass, aluminum and zinc without cutting too deep or rounding details away.
Fine and dense. It cuts very little and leaves a smooth, bright surface ready for plating or a final polish.
Pins, balls and small shapes that press the surface smooth rather than wearing it away, bringing up a bright shine.
Dry natural media used with polishing compound for a soft luster, and to dry parts without water spots.
The liquid in the tumbler cleans, protects parts from tarnish while they run and helps control how bright the finish turns out.
Your aged brass knobs follow these steps from the moment you ask for a quote in San Bernardino until they come home.
Tell us what the parts are, how many you have and the finish you are after.
After your quote is approved, mail your aged brass knobs from San Bernardino to our shop in Oceanside, California. Keep part numbers in separate bags and call first if you're sending a pallet of brass knobs.
We tumble a few pieces first so you can see and approve the finish before the full batch.
Parts run with the media and cycle time dialed in from the sample, in stages when needed.
Every batch is rinsed, dried spot free and checked for lodged media and missed burrs.
Parts move on to plating or patina, or are packed by part number and shipped back insured.
Hard metals and soft metals behave very differently in a tumbler. Each gets its own media and cycle time.
Take a beautiful satin or burnished finish and are the go to metals for the decorative tumbled look on hardware and castings.
Deburred and smoothed with cutting media, then rinsed and dried quickly so the bare steel does not flash rust before plating.
Tough enough for aggressive media. Tumbling gives stainless an even satin or bright burnished look without hand polishing.
Soft and easy to over process, so it runs with lighter media and shorter cycles to protect details and dimensions.
Soft castings with fine detail. Gentle media removes parting lines and flash without rounding off the design.
Light tumbling over plating creates a worn antique look. We review these first, since too much time cuts through the finish.
Since 1989 we have finished metal for manufacturers, designers and restorers. Tumbling, plating and patina all happen under one roof, so your parts go from rough to finished without changing hands.
Send photos and a part count and receive a no obligation quote within 24 hours.
Every batch leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
Small parts in bulk ship easily and affordably. Send a box from any state and get it back insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Everything we do in the tumbler, the finishes it creates and the services that often follow.
Tumbling looks easy from the outside. Getting the same result on hundreds of parts without damaging a single one takes care.
A few parts are run and approved before the full batch, so there are no surprises when the rest come out.
Media size and type are matched to the metal and the holes in each part, to avoid lodging and over cutting.
Finished parts are checked for leftover burrs, stuck media and water spots before they are packed.
Different parts are run and packed separately and labeled the way you sent them, ready for your stock shelf.
Casinos, machine shops, furniture makers and small brands all rely on tumbled metal, including aged brass knobs. Here's who we finish for, and where brass knobs tend to fit in.
Small brass trim, table hardware, rail fittings and decorative accents finished in matching batches, so replacement pieces blend in with the rest. Trusted by casino resorts across North County San Diego.
Hinges, pulls, knobs and escutcheons with a soft tumbled finish that matches across an entire home or project.
Production parts deburred and smoothed in volume, ready for plating, coating or assembly.
Furniture makers use tumbled hardware for a warm, hand finished look on cabinets, chests and tables.
Small lamp parts, finials, canopies and fittings given an even finish before plating or patina.
Buckles, keychains, tags and other small metal goods finished in batches for makers and growing brands.
Sending aged brass knobs from Highland? Send only what we need
Start by counting. Give us the total number of aged brass knobs and how many of each part number are in the box. It helps us pick the right size of load and gives you a firm quote on the batch of brass knobs you're sending from San Bernardino.
Then think about the edges. Tumbling rounds corners a little, which most aged brass knobs need, but some must stay sharp for a reason. If a sharp edge matters or your brass knobs have a tight fit, say so before we quote and we'll plan around it.
Point out holes, slots and threads. Media can wedge into openings that are close to its size, so we pick a media shape and size that stays clear of them. Telling us the hole sizes up front saves time for everyone.
Finally, let us know what happens next. Parts that will be plated get a different finish than parts that will be lacquered or left bare, and parts headed for an assembly line can be packed the way your team needs them.
Tumble Finishing Gallery
Hardware, castings and production parts deburred, smoothed and tumbled in our Oceanside shop.
A good box makes all the difference. Follow these steps when you send aged brass knobs from San Bernardino and we'll take it from there.
Send photos, the metal type and a part count. You will get a written price and lead time, usually the same business day. Please wait for your quote number before shipping.
Keep each part type in its own labeled bag. Mixed parts take longer to sort and hard pieces can mark softer ones on the way here.
Small parts are heavy, so use a strong box and fill the empty space. Insure the box for its real value and email us the tracking number.
We send photos of the sample or finished batch when needed, then pack everything by part number and ship it back insured.
Local shops and makers are welcome to drop off parts for tumbling at our facility in North County San Diego.
Tumble finishing, plating and patina under one roof since 1989.
You don't need to be nearby for batch work on aged brass knobs. San Bernardino, in the Inland Empire at the foot of the San Bernardino Mountains, works the same as Colton or Rialto: photos, a quote, a labeled strong box and insurance for the full value.
Other cities around San Bernardino and Highland that we serve by mail are listed below.
Frequently Asked Questions
Most questions about tumbling aged brass knobs come down to a few themes. Here are the ones that matter most for brass knobs sent from San Bernardino or Colton.
Put in a printed sheet with your name, phone number and email, the quote number, part numbers with quantities, the finish you want on the aged brass knobs and any next step like plating. Keep each part number of brass knobs in its own labeled bag.
A little. With hot, dry summers, finished brass and steel can dull or spot if they stay bare for a long time. We can add a clear lacquer to your aged brass knobs after tumbling, and we dry every batch completely before it ships back.
Yes, but tell us about them first. Media can wedge into openings close to its own size, so we pick a shape and size that stays clear of the openings on your aged brass knobs. Send the hole sizes of your brass knobs with your photos, and every finished batch is checked for lodged media.
We choose by metal. Ceramic cuts fast on hard metals, plastic is gentler on brass, aluminum and zinc, porcelain leaves a fine smooth surface, and stainless steel shapes burnish, so we match the media to your aged brass knobs. For brass knobs, walnut shell and corn cob handle dry finishing and drying when it's needed.
Yes. Hard and soft parts never share a load, and each part number of aged brass knobs is run, bagged and labeled on its own. When the batch is done, your brass knobs are packed by part number and shipped back insured.
Not at all. Most of what comes through our door is home and business hardware: faucets, light fixtures, door handles, cabinet pulls, railings and decorative pieces. We also work for hotels, restaurants, boat owners and manufacturers.
Tell us what the part is, roughly how big it is, how many pieces you have and the finish you're after. If you know the metal, mention it. If not, that's fine. We can usually tell from the photos.
Every part is quoted on its own. The biggest factors are condition, the base metal, size and shape, the finish you choose and how many pieces you send. A part with deep pits or broken spots takes more work before it can be plated.