Deburring
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Rough castings, burrs and sharp corners don't have to stay that way. We deburr, smooth and burnish parts in batches, and parts from Yucca Valley can reach us by mail after a quick quote. Ask for a free written price from your photos.
A shop that's been tumbling metal since 1989
Decorative Metal Coatings has been finishing metal in Oceanside since 1989, and tumbling is part of our regular week. You don't have to live close to use us. Parts from Yucca Valley, Joshua Tree or Twentynine Palms follow the same simple path: you send photos, we quote, you ship, and we send everything back finished.
Tumbling is how we take burrs off machined parts, soften sharp edges and give brass or steel an even look across a whole batch. A drum full of media does the work at once, so every piece gets the same treatment and you don't pay for hand work on each one.
We also plate and patina in the same building. That matters if your Yucca Valley parts need copper, nickel or chrome after tumbling, because nothing has to travel to a second shop in between. Send a few photos and a part count and we'll tell you what we would do.
Not sure which finish your parts need? Send photos, a part count and what the parts are used for. We will suggest a finish, run a few samples if needed, and send back a written quote.
Here's what we run in our tumblers every week. Pick the one that sounds closest to your parts from Yucca Valley, and send photos if you're not sure which one fits.
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Sharp corners are gently rounded and tool marks are softened. Parts feel better in the hand and plating covers edges more evenly.
Steel media presses the surface smooth instead of cutting it, bringing up a bright, clean shine on brass, copper and steel without buffing each piece.
A soft satin surface with worn, rounded edges that looks naturally aged. Popular on brass hinges, pulls, knobs and small decorative castings.
Tumbling first removes scale, light rust and surface marks, so copper, nickel or chrome goes on smoother and the finish looks better for less cost.
Plated or darkened parts are tumbled lightly so the high points wear through and glow, giving hardware a used, lived in character.
Drag the handle across each photo to see parts as they went into the tumbler and as they came out.
Before
Rough castings with parting lines and a dull, uneven skin. Tumbled in stages to smooth the surface and soften the edges into an even satin glow.
Before
Fresh off the machine with burrs, sharp corners and cutting oil. Deburred, edge smoothed and dried spot free, ready to go straight to plating.
Before
Bright, brand new brass that looked out of place in an old home. Darkened and tumbled so the edges wear back to brass, like decades of use.
Not sure what your part needs? Send us a photo.
We'll tell you what the metal is, what it takes to bring it back and what it costs. A written quote usually comes back within 24 business hours, and there's no obligation.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Each method has its place. The right one depends on how many parts you have, their shape and the look you want.
The small pieces that tumble with your parts decide how much metal is removed and how the surface looks. We choose them part by part.
Heavy and abrasive. Used to take down burrs, casting skin and tool marks on steel, stainless and other hard metals.
Lighter and gentler, so it smooths brass, aluminum and zinc without cutting too deep or rounding details away.
Fine and dense. It cuts very little and leaves a smooth, bright surface ready for plating or a final polish.
Pins, balls and small shapes that press the surface smooth rather than wearing it away, bringing up a bright shine.
Dry natural media used with polishing compound for a soft luster, and to dry parts without water spots.
The liquid in the tumbler cleans, protects parts from tarnish while they run and helps control how bright the finish turns out.
We keep the process simple, and it works the same for every order that ships from Yucca Valley.
Tell us what the parts are, how many you have and the finish you are after.
Send the box to Attn: Receiving at our Oceanside address. Put a sheet inside with your name, phone, email and quote number, and email the tracking number from Yucca Valley as soon as you have it.
We tumble a few pieces first so you can see and approve the finish before the full batch.
Parts run with the media and cycle time dialed in from the sample, in stages when needed.
Every batch is rinsed, dried spot free and checked for lodged media and missed burrs.
Parts move on to plating or patina, or are packed by part number and shipped back insured.
Hard metals and soft metals behave very differently in a tumbler. Each gets its own media and cycle time.
Take a beautiful satin or burnished finish and are the go to metals for the decorative tumbled look on hardware and castings.
Deburred and smoothed with cutting media, then rinsed and dried quickly so the bare steel does not flash rust before plating.
Tough enough for aggressive media. Tumbling gives stainless an even satin or bright burnished look without hand polishing.
Soft and easy to over process, so it runs with lighter media and shorter cycles to protect details and dimensions.
Soft castings with fine detail. Gentle media removes parting lines and flash without rounding off the design.
Light tumbling over plating creates a worn antique look. We review these first, since too much time cuts through the finish.
Since 1989 we have finished metal for manufacturers, designers and restorers. Tumbling, plating and patina all happen under one roof, so your parts go from rough to finished without changing hands.
Send photos and a part count and receive a no obligation quote within 24 hours.
Every batch leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
Small parts in bulk ship easily and affordably. Send a box from any state and get it back insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Everything we do in the tumbler, the finishes it creates and the services that often follow.
Tumbling looks easy from the outside. Getting the same result on hundreds of parts without damaging a single one takes care.
A few parts are run and approved before the full batch, so there are no surprises when the rest come out.
Media size and type are matched to the metal and the holes in each part, to avoid lodging and over cutting.
Finished parts are checked for leftover burrs, stuck media and water spots before they are packed.
Different parts are run and packed separately and labeled the way you sent them, ready for your stock shelf.
From hardware to production parts, the work we do falls into a few groups. See where your parts from Yucca Valley belong.
Small brass trim, table hardware, rail fittings and decorative accents finished in matching batches, so replacement pieces blend in with the rest. Trusted by casino resorts across North County San Diego.
Hinges, pulls, knobs and escutcheons with a soft tumbled finish that matches across an entire home or project.
Production parts deburred and smoothed in volume, ready for plating, coating or assembly.
Furniture makers use tumbled hardware for a warm, hand finished look on cabinets, chests and tables.
Small lamp parts, finials, canopies and fittings given an even finish before plating or patina.
Buckles, keychains, tags and other small metal goods finished in batches for makers and growing brands.
A little prep makes a better finish
Samples are the best way to avoid surprises. If you can include one or two extra pieces in your box from Yucca Valley, we can use them to test the finish before the full batch runs, and then show you the result.
If you already have a part with the look you want, send that along as well. Matching a finish by eye is easy when we can hold the real thing next to the parts in the drum, and it keeps everyone on the same page.
Point out holes, slots and threads. Media can wedge into openings that are close to its size, so we pick a media shape and size that stays clear of them. Telling us the hole sizes up front saves time for everyone.
Finally, let us know what happens next. Parts that will be plated get a different finish than parts that will be lacquered or left bare, and parts headed for an assembly line can be packed the way your team needs them.
Tumble Finishing Gallery
Hardware, castings and production parts deburred, smoothed and tumbled in our Oceanside shop.
You can ship from any state, and Yucca Valley is no different. Four simple steps keep your parts safe on the way to us.
Send photos, the metal type and a part count. You will get a written price and lead time, usually the same business day. Please wait for your quote number before shipping.
Keep each part type in its own labeled bag. Mixed parts take longer to sort and hard pieces can mark softer ones on the way here.
Small parts are heavy, so use a strong box and fill the empty space. Insure the box for its real value and email us the tracking number.
We send photos of the sample or finished batch when needed, then pack everything by part number and ship it back insured.
Local shops and makers are welcome to drop off parts for tumbling at our facility in North County San Diego.
Tumble finishing, plating and patina under one roof since 1989.
Yucca Valley sits in the high desert of the Morongo Basin, far from our Oceanside shop, so tumbling by mail makes sense. Photos first, then a quote number, then a strong insured box. Shipping from Joshua Tree or Twentynine Palms works exactly the same way.
Here are other cities close to Yucca Valley that we serve by mail.
Frequently Asked Questions
Before you ship a box from Yucca Valley, you probably have a few questions. These answers cover the ones that come up most often.
Start by emailing photos, the metal type and a part count. We send a written quote and a quote number. Then bag each part number, pack a strong box, insure it and ship it to Oceanside. Send us the tracking number so we know it's coming.
Not in a way that should worry you. Dry desert air is gentle on most metals, though bare brass and steel will still show fingerprints and dull over time. We can add a clear lacquer after tumbling for protection, and we'll talk through the options once we see your photos.
Tumbling finishes many parts at once and gives the same result on every piece, so cost per part drops as quantity goes up. Hand polishing can bring a true mirror shine to flat faces and keeps edges sharp, but each part is handled one at a time. We'll suggest the better fit after seeing your photos.
Yes, but tell us about them first. Media can wedge into openings close to its own size, so we pick a shape and size that stays clear. Send the hole sizes along with your photos and part count, and we'll plan the load. Every finished batch is checked for lodged media.
Not when it's done right. Soft metals run with lighter media and shorter cycles so details and dimensions are protected. We never mix hard and soft parts in the same load, because heavy pieces can ding and scratch softer ones.
Yes, and most of our work starts that way. We strip the old plating down to the base metal, repair what needs repair, then plate it fresh. New plating over a failing layer never lasts, so we don't do it.
We do. Along with single pieces for homeowners, we run batches of hundreds or thousands of parts for companies in California and other states. Send a photo of a sample, the quantity and the finish, and we'll quote the whole run.
Steel, stainless steel, aluminum, brass, bronze, copper, pot metal and zamak. Some of them need extra prep so the plating bonds well, and we'll tell you up front if your part does.