Deburring
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
We tumble finish aluminum brackets and housings shipped to us from San Clemente, from a few dozen pieces up to production runs. Every batch is finished for a smooth matte surface, and we run a sample before the full load so there are no surprises.
Tumbling aluminum brackets and housings the way it should be done
After tumbling, parts get rinsed and dried so they come out spot free. Steel is dried quickly so it doesn't flash rust. Then we look the aluminum brackets and housings over for stuck media and burrs we may have missed, because a part that's almost clean isn't done.
It's a simple routine, and it's the reason we ask so many questions up front. Hole sizes, threads, finish and what happens next all change how we run your aluminum brackets and housings.
So when you write from San Clemente with a few photos, expect some questions. Mail makes the process the same for San Clemente, Dana Point and San Juan Capistrano: we ask, you answer, we finish the batch and send the parts home.
Not sure which finish your parts need? Send photos, a part count and what the parts are used for. We will suggest a finish, run a few samples if needed, and send back a written quote.
Whatever the metal, we match the finish to the job, from aluminum brackets and housings to anything in between. Brackets and housings sent from San Clemente might need burrs removed, edges rounded, a bright burnished shine or a smooth matte surface.
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Sharp corners are gently rounded and tool marks are softened. Parts feel better in the hand and plating covers edges more evenly.
Steel media presses the surface smooth instead of cutting it, bringing up a bright, clean shine on brass, copper and steel without buffing each piece.
A soft satin surface with worn, rounded edges that looks naturally aged. Popular on brass hinges, pulls, knobs and small decorative castings.
Tumbling first removes scale, light rust and surface marks, so copper, nickel or chrome goes on smoother and the finish looks better for less cost.
Plated or darkened parts are tumbled lightly so the high points wear through and glow, giving hardware a used, lived in character.
Drag the handle across each photo to see parts as they went into the tumbler and as they came out.
Before
Rough castings with parting lines and a dull, uneven skin. Tumbled in stages to smooth the surface and soften the edges into an even satin glow.
Before
Fresh off the machine with burrs, sharp corners and cutting oil. Deburred, edge smoothed and dried spot free, ready to go straight to plating.
Before
Bright, brand new brass that looked out of place in an old home. Darkened and tumbled so the edges wear back to brass, like decades of use.
You don't have to live nearby to work with us.
Customers all over the country pack their parts and ship them to our Oceanside shop. We finish them, inspect them and send them back insured. It starts with a few photos.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Each method has its place. The right one depends on how many parts you have, their shape and the look you want.
The small pieces that tumble with your parts decide how much metal is removed and how the surface looks. We choose them part by part.
Heavy and abrasive. Used to take down burrs, casting skin and tool marks on steel, stainless and other hard metals.
Lighter and gentler, so it smooths brass, aluminum and zinc without cutting too deep or rounding details away.
Fine and dense. It cuts very little and leaves a smooth, bright surface ready for plating or a final polish.
Pins, balls and small shapes that press the surface smooth rather than wearing it away, bringing up a bright shine.
Dry natural media used with polishing compound for a soft luster, and to dry parts without water spots.
The liquid in the tumbler cleans, protects parts from tarnish while they run and helps control how bright the finish turns out.
Think of it as a short checklist: six steps from your first photo in San Clemente to aluminum brackets and housings back in your hands.
Tell us what the parts are, how many you have and the finish you are after.
Pack each part number of your aluminum brackets and housings in its own labeled bag and ship the box to Oceanside once you have your quote number. Insure the brackets and housings for their real value and email us the tracking number.
We tumble a few pieces first so you can see and approve the finish before the full batch.
Parts run with the media and cycle time dialed in from the sample, in stages when needed.
Every batch is rinsed, dried spot free and checked for lodged media and missed burrs.
Parts move on to plating or patina, or are packed by part number and shipped back insured.
Hard metals and soft metals behave very differently in a tumbler. Each gets its own media and cycle time.
Take a beautiful satin or burnished finish and are the go to metals for the decorative tumbled look on hardware and castings.
Deburred and smoothed with cutting media, then rinsed and dried quickly so the bare steel does not flash rust before plating.
Tough enough for aggressive media. Tumbling gives stainless an even satin or bright burnished look without hand polishing.
Soft and easy to over process, so it runs with lighter media and shorter cycles to protect details and dimensions.
Soft castings with fine detail. Gentle media removes parting lines and flash without rounding off the design.
Light tumbling over plating creates a worn antique look. We review these first, since too much time cuts through the finish.
Since 1989 we have finished metal for manufacturers, designers and restorers. Tumbling, plating and patina all happen under one roof, so your parts go from rough to finished without changing hands.
Send photos and a part count and receive a no obligation quote within 24 hours.
Every batch leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
Small parts in bulk ship easily and affordably. Send a box from any state and get it back insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Everything we do in the tumbler, the finishes it creates and the services that often follow.
Tumbling looks easy from the outside. Getting the same result on hundreds of parts without damaging a single one takes care.
A few parts are run and approved before the full batch, so there are no surprises when the rest come out.
Media size and type are matched to the metal and the holes in each part, to avoid lodging and over cutting.
Finished parts are checked for leftover burrs, stuck media and water spots before they are packed.
Different parts are run and packed separately and labeled the way you sent them, ready for your stock shelf.
Hardware, lighting, production parts and small goods aluminum brackets and housings included, all go through our tumblers. Here's the breakdown, with brackets and housings in mind.
Small brass trim, table hardware, rail fittings and decorative accents finished in matching batches, so replacement pieces blend in with the rest. Trusted by casino resorts across North County San Diego.
Hinges, pulls, knobs and escutcheons with a soft tumbled finish that matches across an entire home or project.
Production parts deburred and smoothed in volume, ready for plating, coating or assembly.
Furniture makers use tumbled hardware for a warm, hand finished look on cabinets, chests and tables.
Small lamp parts, finials, canopies and fittings given an even finish before plating or patina.
Buckles, keychains, tags and other small metal goods finished in batches for makers and growing brands.
Batches of aluminum brackets and housings go smoother when we plan together
Group by size if you can. A batch of aluminum brackets and housings that are close in size and weight tumbles evenly, while mixed sizes can finish unevenly. Tell us if your box of brackets and housings holds more than one size so we can plan separate loads.
And think about how many aluminum brackets and housings you really have. A few dozen brackets and housings is a fine place to start, and hundreds or thousands work too. For a handful of brackets and housings, we'll let you know honestly if hand polishing is a better value.
Point out holes, slots and threads. Media can wedge into openings that are close to its size, so we pick a media shape and size that stays clear of them. Telling us the hole sizes up front saves time for everyone.
Finally, let us know what happens next. Parts that will be plated get a different finish than parts that will be lacquered or left bare, and parts headed for an assembly line can be packed the way your team needs them.
Tumble Finishing Gallery
Hardware, castings and production parts deburred, smoothed and tumbled in our Oceanside shop.
Getting aluminum brackets and housings from San Clemente to Oceanside takes four steps. None of them are hard, but each one saves time later with brackets and housings.
Send photos, the metal type and a part count. You will get a written price and lead time, usually the same business day. Please wait for your quote number before shipping.
Keep each part type in its own labeled bag. Mixed parts take longer to sort and hard pieces can mark softer ones on the way here.
Small parts are heavy, so use a strong box and fill the empty space. Insure the box for its real value and email us the tracking number.
We send photos of the sample or finished batch when needed, then pack everything by part number and ship it back insured.
Local shops and makers are welcome to drop off parts for tumbling at our facility in North County San Diego.
Tumble finishing, plating and patina under one roof since 1989.
San Clemente is on the south Orange County coast. That puts us a good distance apart, which is why we handle tumbling by mail and keep every step in writing, from the quote for your aluminum brackets and housings to the return shipment.
We also serve other towns around San Clemente, like San Juan Capistrano, and their pages are listed here.
Frequently Asked Questions
Before you ship a box of aluminum brackets and housings from San Clemente, you probably have a few questions. These answers cover the ones that come up most often for brackets and housings.
Yes, with a good box. Small metal parts are heavy, so use a strong carton, fill the gaps and insure the box for the real value of the aluminum brackets and housings. We pack the finished brackets and housings the same way for the trip back.
Tumbling removes very little metal from aluminum brackets and housings, but it does round corners. If your brackets and housings have tight tolerances or edges that must stay sharp, tell us before we quote and we'll plan around it. We can run a sample of your brackets and housings first so you can measure a finished piece.
Yes, and we recommend it. We tumble a few pieces first so you can see and approve a smooth matte surface before the rest of the batch runs. We can send photos of the sample aluminum brackets and housings when you need them, which keeps surprises to a minimum.
Burnishing uses small steel shapes that press aluminum brackets and housings smooth instead of cutting the surface away. On brackets and housings the result is a bright, clean shine without buffing each piece by hand, and almost no metal is removed in the process.
Yes, lightly. A short tumble over plated or darkened parts wears the high points through and gives aluminum brackets and housings an antique, lived in look. Too much time cuts through the finish, so we review jobs with brackets and housings first and usually run a sample.
Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.
Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.
Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.