Mirror Polishing
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
Our wheels turn all day in our 12,000 square foot Oceanside shop, cutting, buffing and coloring brass, bronze, copper, stainless steel and aluminum. Send up to five photos from Pittsburgh and we check the metal, suggest a finish and quote the job in writing.
Pittsburgh handles and rails, polished to last
What makes a polish last? Mostly the steps nobody sees. We strip old lacquer, remove tarnish, cut out scratches wheel by wheel and fully clear each grit before moving to the next. That slow middle part is where Decorative Metal Coatings has spent its time since 1989.
If you are in Pittsburgh, Monroeville or Mount Lebanon, you can get all of that without a big production. Photos go in, a written quote comes back, and your pieces reach us by insured carrier or in person if you are close enough.
The finish is your call. Mirror gives the brightest shine, bright buff is the everyday option and satin and brushed finishes hide fingerprints. We help you choose before work begins, so nothing about the look is a surprise.
Send us a few photos and tell us how the piece is used. We will tell you whether polishing alone will get you there or whether it needs plating, explain what finish makes sense and send back a written quote.
Polishing is more than shine. Each service below is something we do by hand in Oceanside, for pieces coming from Pittsburgh, Monroeville, Mount Lebanon and anywhere else in the country, from mirror finishes to scratch repair.
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
A fine, even grain that softens glare and hides fingerprints. A smart choice for handrails, pulls and levers that get touched all day long.
Deep scratches, light pitting and tool marks are worked out wheel by wheel, so the finished surface is smooth and even instead of wavy.
Tarnish and old lacquer come off, the metal is brought back to its warm color and sealed with a clear coat if you want it to stay that way.
Each metal needs its own compounds. We polish stainless to a crisp shine and aluminum to a bright finish without burning or smearing the surface.
Plating copies the surface under it. We polish parts flat and clean before nickel, chrome or gold so the final finish comes out flawless.
Drag the handle on any photo to see how the piece arrived and how it looked when it left our polishing room.
Before
Dark tarnish, fingerprint stains and old lacquer flaking at the edges. Stripped, polished to a mirror and sealed with a fresh clear coat.
Before
Years of scuffs from shoes and stools. Scratches were cut out and the rail was brought back to a bright, uniform shine along its full length.
Before
Chalky gray oxidation over every surface. Hand polished into the curves and details until the aluminum showed a clean, bright finish again.
See the price before you ship a thing.
Snap a few photos from different angles and tell us the finish you have in mind. You'll get a written quote and a realistic lead time. Standard work takes 3 to 5 weeks, and expedited orders are possible when the schedule allows.
More shine is not always better. The right level depends on how the piece is used, how often it is touched and the look you want.
Each metal has its own hardness, color and quirks. Knowing them is what keeps a polish from turning out wavy, burned or hazy.
Polish up beautifully and take a deep mirror. Old lacquer is stripped first, then the metal is buffed and resealed so the warm color holds.
Soft and quick to scratch, so it is buffed gently with fine compounds. Finished bright for a classic look or left to age naturally.
Hard and tough to cut, but it holds a polish for years. Ideal for rails, kitchen and bar equipment and marine fittings near the coast.
Turns dull and chalky outdoors. We polish it bright and can seal it to slow the oxidation that brings the haze back.
Polishes well but rusts if left bare, so it usually gets plated or coated after polishing. We will explain the options before we start.
Soft castings with a thin skin. Pushing too hard opens pits, so we polish these by hand with light pressure and know when to stop.
Start with photos and finish with a polished piece. The steps in between look like this, in order.
Show us the piece, the damage and the look you want: mirror, bright or satin.
We check the metal and the condition, then send a written quote within 24 business hours.
Pack each piece separately, double box long rails or tubes and put your quote number inside. Ship it insured to Oceanside, then send us the tracking number so we can watch for it.
Old lacquer and tarnish come off, then scratches are worked out from coarse to fine wheels.
A final color buff, a full cleaning, an optional clear coat and a close look under bright light.
Sometimes Polishing Is All It Takes
Many customers call asking for plating when their piece only needs a good polish. If the part is solid brass, copper, stainless or aluminum and the damage is on the surface, polishing alone brings it back for less money and keeps the original metal you already like.
Plating is the answer when the color needs to change, when the metal underneath is steel that will rust, or when the old plating has already worn through to a different color. In those cases we still polish first, because a plated finish only looks as good as the surface under it.
Not sure which group your piece falls in? Look at a worn corner or the back side. If the color is the same all the way through, it is probably solid and a polish will do. If you see a different color peeking through, it is plated, and we will talk you through replating.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Every polished finish and restoration service we handle in house.
Polishing wheels have been turning in our shop since 1989. It is the skill every other finish we offer depends on, and the reason homeowners, designers and casino resorts keep sending us their metal.
Send a photo of your piece and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One heirloom or a full hotel renovation, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
From slot trim to candlesticks, our polishing wheels see a wide mix of work. Here is who we serve and what they send.
Slot machine trim, table rails, bar fixtures and decorative accents polished to shine under bright lights day and night. Casino resorts across North County San Diego trust us with their gaming floors.
Bar rails, foot rests, door push plates and lobby fixtures brought back to a bright, welcoming finish.
Door levers, hinges, knobs and railings polished as a matched set so every room looks consistent.
Chandeliers, sconces, lamp bases and decorative pieces polished by hand, curves and details included.
Stainless cleats, rail fittings and bronze hardware cleaned of salt haze and polished to stand up to coastal air.
Family pieces, candlesticks and collectibles polished carefully so engraving, stamps and fine detail stay sharp.
Fast polishing leaves swirls, waves and rounded edges. We take the time each piece needs so the finish looks right from every angle.
Brass, stainless and aluminum each get their own wheels and compounds, so the surface is never burned, smeared or left hazy.
Every grit is fully removed by the next one before we move on. That is how a polish ends up clear instead of swirly.
Finished pieces are cleaned of all compound and inspected under strong light from several angles before they are approved.
A fresh mirror scratches easily, so each piece is wrapped in soft material and boxed to arrive just as it looked in our shop.
A little care goes a long way
A sealed piece is the easiest kind to look after. Dust it with a soft cloth, wash it with mild soap and water when it gets dirty and dry it right away so water spots do not form. That is usually all a lacquered brass or copper piece needs.
Cold winters and road salt are hard on outdoor metal, so rinse salt off and dry it as soon as you can. If the clear coat starts to flake or turn dark in spots, send us a photo before you try to fix it yourself. A small repair is far easier than a full strip.
Unsealed pieces can be kept bright with a gentle metal polish and a clean microfiber cloth. Rub lightly in the direction of the grain on satin finishes, and use a fresh area of the cloth as it picks up black residue. Abrasive pads and kitchen scrubbers will scratch a mirror finish in seconds.
Near the ocean, salt air speeds everything up. Rinse outdoor hardware with fresh water now and then and dry it. When a piece finally loses its shine, send it back. A repolish is usually quick because the hard cutting work was already done the first time.
Metal Finishing Gallery
A look at recent work from our Oceanside shop: plated hardware, lighting, hospitality and casino pieces, marine fittings and industrial parts.
You do not need special supplies, only soft wrapping, a sturdy box and a carrier that insures the full value.
Email photos of each piece, front and back, and the finish you want. You receive a written quote and lead time, usually the same business day. Wait for your quote number before you ship.
Wrap every piece on its own in soft cloth or bubble wrap so nothing rubs together in transit. Pad the box with at least three inches on every side and double box long rails or tubes.
Declare the full value with the carrier and email us the tracking number so we know what is coming and can log it the day it lands.
Once polishing is done we send photos for your approval, then pack your pieces in new materials and return them insured.
Every piece is polished, cleaned and inspected by hand in our own shop in North County San Diego.
Metal polishing, plating and finishing in San Diego County since 1989.
Pittsburgh is three hours ahead of our Oceanside shop. The city is known for its steel heritage and its bridges, and plenty of metal here deals with cold winters and road salt. Pieces ship by insured carrier, and we send photos for approval before they go back.
We serve all of the US. Here are cities not far from Pittsburgh.
Frequently Asked Questions
Think of this as a short conversation at the counter. Ask away below, and call us for anything not covered.
Bare brass will tarnish over time. If you want the color to last, we can seal it with a clear lacquer coat after polishing. Tell us when you request your quote and we price it with the seal.
Yes. Stainless handles, trim and equipment panels can be polished to a bright shine or a clean satin grain. Send photos and tell us how the piece is used, and we recommend a finish that is easy to keep up.
Yes, but bare steel rusts, so it usually gets plated or coated after polishing. We explain the options before we start, so you know what the finished piece needs to stay protected.
Yes, with care. These soft castings have a thin skin, and pushing too hard opens pits. We polish them by hand with light pressure and know when to stop.
Road salt can spot and cloud bare metal. Wipe it off with a damp cloth, dry the surface and keep a clear coat on brass and copper. If spots set in, a repolish usually clears them.
The shop is open Monday to Friday from 8 AM to 5 PM and Saturday from 9 AM to 2 PM. We're closed on Sunday. Shipments are received Monday to Friday, 8 AM to 4 PM Pacific.
Usually, yes. Send a photo of the piece you want to match, or ship it along with your parts as a sample. We adjust the finish until the new work sits right next to the old.
When the work is done and inspected, we pack your parts in fresh materials and ship them back insured. If you're close to Oceanside, you're welcome to pick them up instead.