Skip to content

Mirror and Satin Metal Polishing Services for Cleveland

Lake air and winter salt wore it down. We polish it back

We have polished metal by hand for more than 35 years. Send photos from Cleveland and get an honest, written answer on what the piece needs.

Certified, Approved and Verified

Metal Polishing Specialists Near Cleveland

Start your quote with a few photos

Getting a quote starts with your camera. Take a few pictures of the piece, front and back, plus a close look at the worst spot, and send them to us with a line about the finish you have in mind.

We check the metal and the condition and send you a written quote within 24 business hours. The price depends on the size of the piece, how much detail it has and how damaged the surface is.

That works from Cleveland just as well as from Lakewood or Parma. Wait for your quote number before you ship anything, and write it on the sheet that goes in the box.

Send us a few photos and tell us how the piece is used. We will tell you whether polishing alone will get you there or whether it needs plating, explain what finish makes sense and send back a written quote.

What We Do

Metal Polishing Services

Our polishing room handles everything from a single heirloom to a full box of hardware. These are the services people ask for most.

Brass door lever polished to a mirror finish

Mirror Polishing

Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.

Stainless steel handle with a brushed satin grain

Satin and Brushed Finishes

A fine, even grain that softens glare and hides fingerprints. A smart choice for handrails, pulls and levers that get touched all day long.

Scratched brass plate being restored by polishing

Scratch and Pit Repair

Deep scratches, light pitting and tool marks are worked out wheel by wheel, so the finished surface is smooth and even instead of wavy.

Polished brass and copper fixtures on a workbench

Brass and Copper Polishing

Tarnish and old lacquer come off, the metal is brought back to its warm color and sealed with a clear coat if you want it to stay that way.

Polished stainless steel and aluminum hardware

Stainless and Aluminum

Each metal needs its own compounds. We polish stainless to a crisp shine and aluminum to a bright finish without burning or smearing the surface.

Metal part polished smooth before plating

Polishing Before Plating

Plating copies the surface under it. We polish parts flat and clean before nickel, chrome or gold so the final finish comes out flawless.

Restoration Results

Before and After

Drag the handle on any photo to see how the piece arrived and how it looked when it left our polishing room.

Brass door lever after mirror polishing
Tarnished brass door lever before polishing Before
After

Solid Brass Door Lever

Dark tarnish, fingerprint stains and old lacquer flaking at the edges. Stripped, polished to a mirror and sealed with a fresh clear coat.

MIRROR POLISH BRASS LACQUERED
Stainless steel bar rail after polishing
Scratched stainless steel bar rail before polishing Before
After

Stainless Bar Foot Rail

Years of scuffs from shoes and stools. Scratches were cut out and the rail was brought back to a bright, uniform shine along its full length.

BRIGHT BUFF STAINLESS HOSPITALITY
Cast aluminum wall sconce after polishing
Oxidized cast aluminum wall sconce before polishing Before
After

Cast Aluminum Sconce

Chalky gray oxidation over every surface. Hand polished into the curves and details until the aluminum showed a clean, bright finish again.

HAND POLISHED ALUMINUM LIGHTING
Free Quotes

Not sure what your part needs? Send us a photo.

We'll tell you what the metal is, what it takes to bring it back and what it costs. A written quote usually comes back within 24 business hours, and there's no obligation.

Tap to add photos (up to 5). JPG, PNG, WEBP or iPhone HEIC.
    Choosing Your Finish

    Three Levels of Polish

    More shine is not always better. The right level depends on how the piece is used, how often it is touched and the look you want.

    Low glare

    Satin and Brushed

    • Soft, even grain
    • Hides fingerprints and wear
    • Handrails, levers and pulls
    • Easy to touch up later
    • Modern, understated look
    Everyday shine

    Bright Buff

    • Clean, glossy surface
    • Light marks may remain
    • Hardware and fixtures
    • Good value on larger jobs
    • Bright but not a mirror
    Showpiece

    Mirror Finish

    • Cut, buffed and colored
    • Reflects like glass
    • Lighting, trim and decor
    • Most hand work, highest cost
    • Shows every fingerprint
    What We Can Finish

    Metals We Polish

    Each metal has its own hardness, color and quirks. Knowing them is what keeps a polish from turning out wavy, burned or hazy.

    Most popular

    Brass and Bronze

    Polish up beautifully and take a deep mirror. Old lacquer is stripped first, then the metal is buffed and resealed so the warm color holds.

    All finishes

    Copper

    Soft and quick to scratch, so it is buffed gently with fine compounds. Finished bright for a classic look or left to age naturally.

    All finishes

    Stainless Steel

    Hard and tough to cut, but it holds a polish for years. Ideal for rails, kitchen and bar equipment and marine fittings near the coast.

    All finishes

    Aluminum

    Turns dull and chalky outdoors. We polish it bright and can seal it to slow the oxidation that brings the haze back.

    Ask us first

    Steel

    Polishes well but rusts if left bare, so it usually gets plated or coated after polishing. We will explain the options before we start.

    Handled with care

    Zinc Die Cast and Pot Metal

    Soft castings with a thin skin. Pushing too hard opens pits, so we polish these by hand with light pressure and know when to stop.

    How It Works

    Our Metal Polishing Process

    Every order follows the same five steps, so you always know what comes next.

    1

    Send Photos

    Show us the piece, the damage and the look you want: mirror, bright or satin.

    2

    Get Your Quote

    We check the metal and the condition, then send a written quote within 24 business hours.

    3

    Ship or Drop Off

    Send the box with your quote number and tracking number, and declare the full value with the carrier.

    4

    Cut and Buff

    Old lacquer and tarnish come off, then scratches are worked out from coarse to fine wheels.

    5

    Color and Inspect

    A final color buff, a full cleaning, an optional clear coat and a close look under bright light.

    Polish or Plate?

    Sometimes Polishing Is All It Takes

    Many customers call asking for plating when their piece only needs a good polish. If the part is solid brass, copper, stainless or aluminum and the damage is on the surface, polishing alone brings it back for less money and keeps the original metal you already like.

    Plating is the answer when the color needs to change, when the metal underneath is steel that will rust, or when the old plating has already worn through to a different color. In those cases we still polish first, because a plated finish only looks as good as the surface under it.

    Not sure which group your piece falls in? Look at a worn corner or the back side. If the color is the same all the way through, it is probably solid and a polish will do. If you see a different color peeking through, it is plated, and we will talk you through replating.

    What Our Clients Say

    Trusted by Professionals

    From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.

    Metal Polishing Catalog

    Polishing Finishes and Services

    Every polished finish and restoration service we handle in house.

    Polished Finishes

    • Mirror Polish
    • Color Buff
    • Bright Buff
    • Satin Finish
    • Straight Grain Brushed
    • Satin and Mirror Combination
    • Clear Lacquer Topcoat

    Repair and Restoration

    • Scratch Removal
    • Light Pit Removal
    • Tarnish and Oxidation Removal
    • Old Lacquer Stripping
    • Tool and Grinding Mark Removal
    • Detail and Edge Hand Work
    • Polishing Before Plating

    Metals We Polish

    • Brass
    • Bronze
    • Copper
    • Stainless Steel
    • Aluminum
    • Steel
    • Zinc Die Cast and Pot Metal
    • Custom Sample Match
    Polished brass and stainless pieces on a workbench in the shop
    Plating line at Decorative Metal Coatings
    35+ Years of Expertise
    Take a Moment to Learn More

    About Decorative Metal Coatings

    Polishing wheels have been turning in our shop since 1989. It is the skill every other finish we offer depends on, and the reason homeowners, designers and casino resorts keep sending us their metal.

    Free Estimates Available

    Send a photo of your piece and receive a no obligation quote within 24 hours.

    Quality Guaranteed

    Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.

    Ship From Anywhere in the US

    One heirloom or a full hotel renovation, shipped to us from any state and returned insured.

    Fast Turnaround Times

    Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.

    Who We Serve

    Who Trusts Us to Polish Their Metal

    Different customers bring us different metal, but the goal is the same, a finish that looks right. These are the common jobs.

    Polished brass and stainless trim along a casino gaming table and bar

    Casinos and Gaming

    Slot machine trim, table rails, bar fixtures and decorative accents polished to shine under bright lights day and night. Casino resorts across North County San Diego trust us with their gaming floors.

    Polished brass bar rail and fixtures in a restaurant

    Hotels and Restaurants

    Bar rails, foot rests, door push plates and lobby fixtures brought back to a bright, welcoming finish.

    Polished door handles, hinges and cabinet pulls

    Architectural Hardware

    Door levers, hinges, knobs and railings polished as a matched set so every room looks consistent.

    Polished brass chandelier arms and lamp bases

    Lighting and Decor

    Chandeliers, sconces, lamp bases and decorative pieces polished by hand, curves and details included.

    Polished stainless steel cleats and rail fittings on a dock

    Marine Hardware

    Stainless cleats, rail fittings and bronze hardware cleaned of salt haze and polished to stand up to coastal air.

    Polished antique brass candlesticks and a vintage tray

    Antiques and Heirlooms

    Family pieces, candlesticks and collectibles polished carefully so engraving, stamps and fine detail stay sharp.

    Our Commitment

    Polishing Done With Patience

    Fast polishing leaves swirls, waves and rounded edges. We take the time each piece needs so the finish looks right from every angle.

    The Right Compound

    Brass, stainless and aluminum each get their own wheels and compounds, so the surface is never burned, smeared or left hazy.

    No Skipped Steps

    Every grit is fully removed by the next one before we move on. That is how a polish ends up clear instead of swirly.

    Checked Under Bright Light

    Finished pieces are cleaned of all compound and inspected under strong light from several angles before they are approved.

    Wrapped Before It Leaves

    A fresh mirror scratches easily, so each piece is wrapped in soft material and boxed to arrive just as it looked in our shop.

    What We Do Differently

    • We check whether a piece is solid or plated before polishing
    • Sharp edges, lettering and details are kept crisp
    • Brass and copper are sealed when you want the color to last
    • We send photos if we find damage that changes the plan
    • Every piece is inspected before it is packed

    What You May Experience Elsewhere

    • Plated hardware polished right through to the base metal
    • Swirl marks and haze left from skipped steps
    • Rounded edges and softened engraving
    • Compound residue left in corners and recesses
    • Unsealed brass that tarnishes again within weeks

    Aftercare for Polished Metal in Cleveland

    How to Protect Your Fresh Polish

    Cleveland sits on Lake Erie, where lake effect snow, winter road salt and damp air are hard on exposed metal. Winter grime and salt are easiest to remove while they are fresh, so wipe entry hardware with mild soap and water and dry it with a soft cloth.

    Satin and brushed finishes are the easiest to live with. Wipe in the direction of the grain and fingerprints barely show.

    Unsealed pieces can be kept bright with a gentle metal polish and a clean microfiber cloth. Rub lightly in the direction of the grain on satin finishes, and use a fresh area of the cloth as it picks up black residue. Abrasive pads and kitchen scrubbers will scratch a mirror finish in seconds.

    Near the ocean, salt air speeds everything up. Rinse outdoor hardware with fresh water now and then and dry it. When a piece finally loses its shine, send it back. A repolish is usually quick because the hard cutting work was already done the first time.

    Nationwide Service

    Ship Us Your Pieces From Anywhere in the US

    You do not need to be near Oceanside to get a proper polish. These steps cover shipping from Cleveland.

    01

    Get a quote first

    Email photos of each piece, front and back, and the finish you want. You receive a written quote and lead time, usually the same business day. Wait for your quote number before you ship.

    02

    Protect polished surfaces

    Wrap every piece on its own in soft cloth or bubble wrap so nothing rubs together in transit. Pad the box with at least three inches on every side and double box long rails or tubes.

    03

    Insure and send tracking

    Declare the full value with the carrier and email us the tracking number so we know what is coming and can log it the day it lands.

    04

    Approve, then we ship back

    Once polishing is done we send photos for your approval, then pack your pieces in new materials and return them insured.

    Visit Us

    Our Location

    Every piece is polished, cleaned and inspected by hand in our own shop in North County San Diego.

    Decorative Metal Coatings

    Metal polishing, plating and finishing in San Diego County since 1989.

    Business Hours

    • Monday to Friday 8:00 AM to 5:00 PM
    • Saturday 9:00 AM to 2:00 PM
    • Sunday Closed

    Shipping From Cleveland?

    Cleveland is a long way from Oceanside, so most of the conversation happens by email and phone. Carrier deliveries are received Monday through Friday, 8:00 AM to 4:00 PM Pacific, which is three hours behind you.

    Nearby Cities We Serve

    Metal travels well when it is packed right. These cities near you use the same shipping steps.

    Polishing Answers for Cleveland Customers

    Frequently Asked Questions

    These answers cover the basics for customers in Cleveland. For anything else, call us at (760) 746 3378.

    A printed sheet with your name, phone number and email, the quote number, a list of every piece and the finish for each, and a note on anything we should not polish.

    We polish antiques carefully so engraving, stamps and fine detail stay sharp. Tell us what matters most and we note it on the job.

    Salt left on metal dulls it quickly. Rinse entry hardware and railings with fresh water as soon as you can and dry them well.

    Email is enough to get a quote. If you prefer to talk, call (760) 746 3378 during our Pacific hours.

    One small piece is welcome. A candlestick or a door handle goes through the same careful steps as a big order.

    Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.

    Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.

    Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.