Mirror Polishing
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
Scratched, dull or tarnished metal can shine again. We polish brass, stainless steel, copper and aluminum by hand in our Oceanside shop, and we work with customers in La Habra by photos first, so you know the plan and the price before anything ships.
Metal polishing done by hand, built around your piece
If you own brass hardware, a stainless rail or an old light fixture in La Habra, you have probably noticed how fast a good finish fades. Decorative Metal Coatings has been polishing metal by hand in Oceanside since 1989, and the process is the same for anyone in La Habra, Brea or Whittier who wants that shine back.
Every piece is cut, buffed and colored on our wheels, moving from coarse compounds to fine ones. Scratches and light pits come out before the final color buff, so the surface ends up smooth and even instead of wavy. Then we clean it, check it under bright light and wrap it for travel.
Not every piece needs the same finish, and not every piece needs polishing at all. Some are better off plated. That is why we start with photos and a straight answer. Pieces from La Habra ship to our Oceanside shop with tracking and full value insurance.
Send us a few photos and tell us how the piece is used. We will tell you whether polishing alone will get you there or whether it needs plating, explain what finish makes sense and send back a written quote.
Brass, copper, stainless steel and aluminum each polish differently. Our team knows which wheel and compound suits which metal, and that shows in the results we send back to La Habra.
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
A fine, even grain that softens glare and hides fingerprints. A smart choice for handrails, pulls and levers that get touched all day long.
Deep scratches, light pitting and tool marks are worked out wheel by wheel, so the finished surface is smooth and even instead of wavy.
Tarnish and old lacquer come off, the metal is brought back to its warm color and sealed with a clear coat if you want it to stay that way.
Each metal needs its own compounds. We polish stainless to a crisp shine and aluminum to a bright finish without burning or smearing the surface.
Plating copies the surface under it. We polish parts flat and clean before nickel, chrome or gold so the final finish comes out flawless.
Drag the handle on any photo to see how the piece arrived and how it looked when it left our polishing room.
Before
Dark tarnish, fingerprint stains and old lacquer flaking at the edges. Stripped, polished to a mirror and sealed with a fresh clear coat.
Before
Years of scuffs from shoes and stools. Scratches were cut out and the rail was brought back to a bright, uniform shine along its full length.
Before
Chalky gray oxidation over every surface. Hand polished into the curves and details until the aluminum showed a clean, bright finish again.
Big order or a single knob, same care.
Homeowners send us one faucet. Companies in and out of state send production runs of hundreds or thousands of parts. Both get a written quote and the same inspection before anything ships back.
More shine is not always better. The right level depends on how the piece is used, how often it is touched and the look you want.
Each metal has its own hardness, color and quirks. Knowing them is what keeps a polish from turning out wavy, burned or hazy.
Polish up beautifully and take a deep mirror. Old lacquer is stripped first, then the metal is buffed and resealed so the warm color holds.
Soft and quick to scratch, so it is buffed gently with fine compounds. Finished bright for a classic look or left to age naturally.
Hard and tough to cut, but it holds a polish for years. Ideal for rails, kitchen and bar equipment and marine fittings near the coast.
Turns dull and chalky outdoors. We polish it bright and can seal it to slow the oxidation that brings the haze back.
Polishes well but rusts if left bare, so it usually gets plated or coated after polishing. We will explain the options before we start.
Soft castings with a thin skin. Pushing too hard opens pits, so we polish these by hand with light pressure and know when to stop.
Each job follows the same steps, whether it is one cabinet pull or a whole set of fixtures from La Habra.
Show us the piece, the damage and the look you want: mirror, bright or satin.
We check the metal and the condition, then send a written quote within 24 business hours.
Pack each piece on its own, pad the box with at least three inches on every side and insure it for full value. Then email us the tracking number from La Habra.
Old lacquer and tarnish come off, then scratches are worked out from coarse to fine wheels.
A final color buff, a full cleaning, an optional clear coat and a close look under bright light.
Sometimes Polishing Is All It Takes
Many customers call asking for plating when their piece only needs a good polish. If the part is solid brass, copper, stainless or aluminum and the damage is on the surface, polishing alone brings it back for less money and keeps the original metal you already like.
Plating is the answer when the color needs to change, when the metal underneath is steel that will rust, or when the old plating has already worn through to a different color. In those cases we still polish first, because a plated finish only looks as good as the surface under it.
Not sure which group your piece falls in? Look at a worn corner or the back side. If the color is the same all the way through, it is probably solid and a polish will do. If you see a different color peeking through, it is plated, and we will talk you through replating.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Every polished finish and restoration service we handle in house.
Polishing wheels have been turning in our shop since 1989. It is the skill every other finish we offer depends on, and the reason homeowners, designers and casino resorts keep sending us their metal.
Send a photo of your piece and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One heirloom or a full hotel renovation, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
If you own metal that looks tired, someone like you has probably sent it to us before. Here is who we help in La Habra and elsewhere.
Slot machine trim, table rails, bar fixtures and decorative accents polished to shine under bright lights day and night. Casino resorts across North County San Diego trust us with their gaming floors.
Bar rails, foot rests, door push plates and lobby fixtures brought back to a bright, welcoming finish.
Door levers, hinges, knobs and railings polished as a matched set so every room looks consistent.
Chandeliers, sconces, lamp bases and decorative pieces polished by hand, curves and details included.
Stainless cleats, rail fittings and bronze hardware cleaned of salt haze and polished to stand up to coastal air.
Family pieces, candlesticks and collectibles polished carefully so engraving, stamps and fine detail stay sharp.
Fast polishing leaves swirls, waves and rounded edges. We take the time each piece needs so the finish looks right from every angle.
Brass, stainless and aluminum each get their own wheels and compounds, so the surface is never burned, smeared or left hazy.
Every grit is fully removed by the next one before we move on. That is how a polish ends up clear instead of swirly.
Finished pieces are cleaned of all compound and inspected under strong light from several angles before they are approved.
A fresh mirror scratches easily, so each piece is wrapped in soft material and boxed to arrive just as it looked in our shop.
What to do once the work is done
Antiques and family pieces need a gentle hand. Keep them dry, dust them with a soft cloth and avoid strong cleaners, which can strip old lacquer or dull fine detail. That advice holds for any heirloom in La Habra.
If a piece has been polished to a bright finish, avoid rubbing engraved areas. Over time even careful rubbing softens detail. When the shine fades, a light repolish from our shop is gentler than frequent home polishing.
Unsealed pieces can be kept bright with a gentle metal polish and a clean microfiber cloth. Rub lightly in the direction of the grain on satin finishes, and use a fresh area of the cloth as it picks up black residue. Abrasive pads and kitchen scrubbers will scratch a mirror finish in seconds.
Near the ocean, salt air speeds everything up. Rinse outdoor hardware with fresh water now and then and dry it. When a piece finally loses its shine, send it back. A repolish is usually quick because the hard cutting work was already done the first time.
Metal Finishing Gallery
A look at recent work from our Oceanside shop: plated hardware, lighting, hospitality and casino pieces, marine fittings and industrial parts.
The same steps apply for shipping from La Habra, whether the piece is a small pull or a long rail.
Email photos of each piece, front and back, and the finish you want. You receive a written quote and lead time, usually the same business day. Wait for your quote number before you ship.
Wrap every piece on its own in soft cloth or bubble wrap so nothing rubs together in transit. Pad the box with at least three inches on every side and double box long rails or tubes.
Declare the full value with the carrier and email us the tracking number so we know what is coming and can log it the day it lands.
Once polishing is done we send photos for your approval, then pack your pieces in new materials and return them insured.
Every piece is polished, cleaned and inspected by hand in our own shop in North County San Diego.
Metal polishing, plating and finishing in San Diego County since 1989.
La Habra sits right on the Orange County line, a good distance north of our Oceanside shop. Most customers here ship their pieces to us, insured and tracked, and we send photos before anything goes back. Pieces from Brea and Whittier travel the same way.
Not in La Habra? We also polish metal for customers in these nearby cities.
Frequently Asked Questions
Quick answers on finishes, metals and shipping from La Habra. For anything else, talk to the shop.
Yes. Many older homes in the area have brass door levers, cabinet pulls and light fixtures with worn lacquer. We strip the old coating, polish the metal and reseal it if you like. Send photos of one piece and of the full set.
Look at a worn corner or the back. If the color stays the same all the way through, it is probably solid. If a different color shows through, it is plated. You can also send us photos, and we will check for free before we touch it.
Aluminum polishes bright, but it turns dull and chalky outdoors. We can seal it afterward to slow that oxidation. If the haze comes back down the road, the piece can be repolished, and that is usually quick because the hard cutting is done.
Yes. Wrap every piece separately, add at least three inches of padding and list each piece on a printed sheet. We polish the set together so the finish matches from one pull to the next.
Yes, with a gentle hand. Some customers want antiques bright, others want only the tarnish gone. We talk through it before we start, and we use light compounds so the detail and age marks you care about stay put.
Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.
Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.
Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.