Mirror Polishing
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
We cut, buff and color brass, copper, stainless steel and aluminum by hand in our Oceanside shop, then send it back to Adelanto looking the way you want. Send photos and get a free written quote.
Polishing done by hand, one wheel at a time
A good polish is slow work. At our shop in Oceanside, each piece from Adelanto gets cut, buffed and colored by hand, moving from coarse wheels to fine ones so the scratches from the last step are fully gone before we start the next.
That patience is what keeps a finish clear instead of swirly. It also means we pick a different wheel and compound for brass, stainless steel, aluminum and copper, because each of those metals reacts in its own way when it gets hot.
If you live in Adelanto or over in Victorville or Hesperia, the path is simple. Take photos, send them our way and wait for your quote number. Then ship the piece or drop it off, and we handle the rest.
Send us a few photos and tell us how the piece is used. We will tell you whether polishing alone will get you there or whether it needs plating, explain what finish makes sense and send back a written quote.
Mirror shine, soft satin or a clean bright buff, we do the whole range in house. Adelanto projects get the same wheels, compounds and attention as every other piece that comes through our door.
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
A fine, even grain that softens glare and hides fingerprints. A smart choice for handrails, pulls and levers that get touched all day long.
Deep scratches, light pitting and tool marks are worked out wheel by wheel, so the finished surface is smooth and even instead of wavy.
Tarnish and old lacquer come off, the metal is brought back to its warm color and sealed with a clear coat if you want it to stay that way.
Each metal needs its own compounds. We polish stainless to a crisp shine and aluminum to a bright finish without burning or smearing the surface.
Plating copies the surface under it. We polish parts flat and clean before nickel, chrome or gold so the final finish comes out flawless.
Drag the handle on any photo to see how the piece arrived and how it looked when it left our polishing room.
Before
Dark tarnish, fingerprint stains and old lacquer flaking at the edges. Stripped, polished to a mirror and sealed with a fresh clear coat.
Before
Years of scuffs from shoes and stools. Scratches were cut out and the rail was brought back to a bright, uniform shine along its full length.
Before
Chalky gray oxidation over every surface. Hand polished into the curves and details until the aluminum showed a clean, bright finish again.
Not sure what your part needs? Send us a photo.
We'll tell you what the metal is, what it takes to bring it back and what it costs. A written quote usually comes back within 24 business hours, and there's no obligation.
More shine is not always better. The right level depends on how the piece is used, how often it is touched and the look you want.
Each metal has its own hardness, color and quirks. Knowing them is what keeps a polish from turning out wavy, burned or hazy.
Polish up beautifully and take a deep mirror. Old lacquer is stripped first, then the metal is buffed and resealed so the warm color holds.
Soft and quick to scratch, so it is buffed gently with fine compounds. Finished bright for a classic look or left to age naturally.
Hard and tough to cut, but it holds a polish for years. Ideal for rails, kitchen and bar equipment and marine fittings near the coast.
Turns dull and chalky outdoors. We polish it bright and can seal it to slow the oxidation that brings the haze back.
Polishes well but rusts if left bare, so it usually gets plated or coated after polishing. We will explain the options before we start.
Soft castings with a thin skin. Pushing too hard opens pits, so we polish these by hand with light pressure and know when to stop.
Five steps take your piece from a dull, scratched surface to a finish you are proud of.
Show us the piece, the damage and the look you want: mirror, bright or satin.
We check the metal and the condition, then send a written quote within 24 business hours.
Write your quote number on a sheet inside the box and ship it to Oceanside, or bring it to the shop yourself.
Old lacquer and tarnish come off, then scratches are worked out from coarse to fine wheels.
A final color buff, a full cleaning, an optional clear coat and a close look under bright light.
Sometimes Polishing Is All It Takes
Many customers call asking for plating when their piece only needs a good polish. If the part is solid brass, copper, stainless or aluminum and the damage is on the surface, polishing alone brings it back for less money and keeps the original metal you already like.
Plating is the answer when the color needs to change, when the metal underneath is steel that will rust, or when the old plating has already worn through to a different color. In those cases we still polish first, because a plated finish only looks as good as the surface under it.
Not sure which group your piece falls in? Look at a worn corner or the back side. If the color is the same all the way through, it is probably solid and a polish will do. If you see a different color peeking through, it is plated, and we will talk you through replating.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Every polished finish and restoration service we handle in house.
Polishing wheels have been turning in our shop since 1989. It is the skill every other finish we offer depends on, and the reason homeowners, designers and casino resorts keep sending us their metal.
Send a photo of your piece and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One heirloom or a full hotel renovation, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Homeowners, restaurant owners, boat owners and casino resorts all send us metal. These are the kinds of jobs our polishing wheels see most often.
Slot machine trim, table rails, bar fixtures and decorative accents polished to shine under bright lights day and night. Casino resorts across North County San Diego trust us with their gaming floors.
Bar rails, foot rests, door push plates and lobby fixtures brought back to a bright, welcoming finish.
Door levers, hinges, knobs and railings polished as a matched set so every room looks consistent.
Chandeliers, sconces, lamp bases and decorative pieces polished by hand, curves and details included.
Stainless cleats, rail fittings and bronze hardware cleaned of salt haze and polished to stand up to coastal air.
Family pieces, candlesticks and collectibles polished carefully so engraving, stamps and fine detail stay sharp.
Fast polishing leaves swirls, waves and rounded edges. We take the time each piece needs so the finish looks right from every angle.
Brass, stainless and aluminum each get their own wheels and compounds, so the surface is never burned, smeared or left hazy.
Every grit is fully removed by the next one before we move on. That is how a polish ends up clear instead of swirly.
Finished pieces are cleaned of all compound and inspected under strong light from several angles before they are approved.
A fresh mirror scratches easily, so each piece is wrapped in soft material and boxed to arrive just as it looked in our shop.
Keeping Metal Bright in the High Desert
The high desert is hard on finishes. Dust blows in, summer sun beats on south facing hardware and winter nights swing cold. For polished pieces in Adelanto, that means a gentle wipe now and then keeps grit from scratching the surface while you clean.
If your brass or copper is sealed with a clear coat, wipe it with a soft cloth dampened with water and a drop of mild soap, then dry it. Bare brass and copper start to darken within weeks, so ask for a sealed finish when you want the color to last.
Unsealed pieces can be kept bright with a gentle metal polish and a clean microfiber cloth. Rub lightly in the direction of the grain on satin finishes, and use a fresh area of the cloth as it picks up black residue. Abrasive pads and kitchen scrubbers will scratch a mirror finish in seconds.
Near the ocean, salt air speeds everything up. Rinse outdoor hardware with fresh water now and then and dry it. When a piece finally loses its shine, send it back. A repolish is usually quick because the hard cutting work was already done the first time.
Metal Finishing Gallery
A look at recent work from our Oceanside shop: plated hardware, lighting, hospitality and casino pieces, marine fittings and industrial parts.
Adelanto is a good drive from our shop, so most people ship their pieces and get them back insured. Here is how that works from start to finish.
Email photos of each piece, front and back, and the finish you want. You receive a written quote and lead time, usually the same business day. Wait for your quote number before you ship.
Wrap every piece on its own in soft cloth or bubble wrap so nothing rubs together in transit. Pad the box with at least three inches on every side and double box long rails or tubes.
Declare the full value with the carrier and email us the tracking number so we know what is coming and can log it the day it lands.
Once polishing is done we send photos for your approval, then pack your pieces in new materials and return them insured.
Every piece is polished, cleaned and inspected by hand in our own shop in North County San Diego.
Metal polishing, plating and finishing in San Diego County since 1989.
It is a good drive from the high desert to our Oceanside shop, so plan the trip around our hours, Monday to Friday 8:00 AM to 5:00 PM or Saturday 9:00 AM to 2:00 PM. If that sounds like too much road for one piece of hardware, a quote by email and a box in the mail does the same job.
Pieces from these neighboring high desert cities follow the same quote, ship and return steps.
Frequently Asked Questions
Short answers to common questions about polishing, shipping and care. If yours is missing, call us or send photos and we will answer.
Yes. Email photos first and wait for your quote number before you ship. Wrap each piece on its own, pad the box with at least three inches on every side, double box long rails or tubes and email us the tracking number. We send your pieces back insured.
Dust and strong sun wear on any finish over time. Brass and copper that are sealed with a clear coat hold their color longest, since bare brass and copper start to darken within weeks. Ask for the clear coat when you request your quote.
No. We check whether a piece is solid metal or plated from your photos, with no charge and no obligation. That matters because polishing too hard cuts right through plating.
Standard turnaround is 3 to 5 weeks in the shop. Expedited orders can take 5 to 7 business days, so ask us about availability. Shipping time each way is extra.
Scratches and light pitting come out wheel by wheel. Deep gouges are a different story, because they may need more metal removed than is safe. We tell you that in the quote.
Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.
Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.
Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.