Mirror Polishing
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
Metal polishing in Milwaukee starts with a photo. Send us a few pictures of your hardware, rail or fixture, and we will tell you if a polish will do the job or if plating makes more sense. Everything we polish is finished by hand, with a free written quote up front.
Milwaukee metal polishing, sent by mail, done by hand
Stainless steel and aluminum are not polished like brass, and treating them the same is how pieces end up burned or hazy. Our shop uses separate wheels and compounds for each metal, which is why customers in Milwaukee send us rails, handles and fittings.
Stainless holds a polish for years once it is done right. Aluminum turns chalky outdoors, so we polish it bright and can seal it to slow the oxidation. Both take careful work, and neither should be rushed or finished with the wrong compound.
If you have stainless or aluminum pieces in Milwaukee, Wauwatosa or West Allis that look scratched or cloudy, send us a few photos and we will tell you what to expect. We work with customers in Milwaukee entirely by photos and shipping, and every piece goes back insured.
Send us a few photos and tell us how the piece is used. We will tell you whether polishing alone will get you there or whether it needs plating, explain what finish makes sense and send back a written quote.
Tarnish, scratches or a tired old finish all have a polishing service built for them. Take a look at what we offer to Milwaukee customers and beyond.
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
A fine, even grain that softens glare and hides fingerprints. A smart choice for handrails, pulls and levers that get touched all day long.
Deep scratches, light pitting and tool marks are worked out wheel by wheel, so the finished surface is smooth and even instead of wavy.
Tarnish and old lacquer come off, the metal is brought back to its warm color and sealed with a clear coat if you want it to stay that way.
Each metal needs its own compounds. We polish stainless to a crisp shine and aluminum to a bright finish without burning or smearing the surface.
Plating copies the surface under it. We polish parts flat and clean before nickel, chrome or gold so the final finish comes out flawless.
Drag the handle on any photo to see how the piece arrived and how it looked when it left our polishing room.
Before
Dark tarnish, fingerprint stains and old lacquer flaking at the edges. Stripped, polished to a mirror and sealed with a fresh clear coat.
Before
Years of scuffs from shoes and stools. Scratches were cut out and the rail was brought back to a bright, uniform shine along its full length.
Before
Chalky gray oxidation over every surface. Hand polished into the curves and details until the aluminum showed a clean, bright finish again.
You don't have to live nearby to work with us.
Customers all over the country pack their parts and ship them to our Oceanside shop. We finish them, inspect them and send them back insured. It starts with a few photos.
More shine is not always better. The right level depends on how the piece is used, how often it is touched and the look you want.
Each metal has its own hardness, color and quirks. Knowing them is what keeps a polish from turning out wavy, burned or hazy.
Polish up beautifully and take a deep mirror. Old lacquer is stripped first, then the metal is buffed and resealed so the warm color holds.
Soft and quick to scratch, so it is buffed gently with fine compounds. Finished bright for a classic look or left to age naturally.
Hard and tough to cut, but it holds a polish for years. Ideal for rails, kitchen and bar equipment and marine fittings near the coast.
Turns dull and chalky outdoors. We polish it bright and can seal it to slow the oxidation that brings the haze back.
Polishes well but rusts if left bare, so it usually gets plated or coated after polishing. We will explain the options before we start.
Soft castings with a thin skin. Pushing too hard opens pits, so we polish these by hand with light pressure and know when to stop.
Polishing is slow work done in order. Here is the order we follow for every piece that arrives from Milwaukee.
Show us the piece, the damage and the look you want: mirror, bright or satin.
We check the metal and the condition, then send a written quote within 24 business hours.
Wrap each piece on its own, pad the box with at least three inches on every side and insure it for full value. Email us the tracking number once it leaves Milwaukee.
Old lacquer and tarnish come off, then scratches are worked out from coarse to fine wheels.
A final color buff, a full cleaning, an optional clear coat and a close look under bright light.
Sometimes Polishing Is All It Takes
Many customers call asking for plating when their piece only needs a good polish. If the part is solid brass, copper, stainless or aluminum and the damage is on the surface, polishing alone brings it back for less money and keeps the original metal you already like.
Plating is the answer when the color needs to change, when the metal underneath is steel that will rust, or when the old plating has already worn through to a different color. In those cases we still polish first, because a plated finish only looks as good as the surface under it.
Not sure which group your piece falls in? Look at a worn corner or the back side. If the color is the same all the way through, it is probably solid and a polish will do. If you see a different color peeking through, it is plated, and we will talk you through replating.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Every polished finish and restoration service we handle in house.
Polishing wheels have been turning in our shop since 1989. It is the skill every other finish we offer depends on, and the reason homeowners, designers and casino resorts keep sending us their metal.
Send a photo of your piece and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One heirloom or a full hotel renovation, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Property managers, designers, boat owners and collectors all rely on a good polish. Here is how we serve each of them, including customers around Milwaukee.
Slot machine trim, table rails, bar fixtures and decorative accents polished to shine under bright lights day and night. Casino resorts across North County San Diego trust us with their gaming floors.
Bar rails, foot rests, door push plates and lobby fixtures brought back to a bright, welcoming finish.
Door levers, hinges, knobs and railings polished as a matched set so every room looks consistent.
Chandeliers, sconces, lamp bases and decorative pieces polished by hand, curves and details included.
Stainless cleats, rail fittings and bronze hardware cleaned of salt haze and polished to stand up to coastal air.
Family pieces, candlesticks and collectibles polished carefully so engraving, stamps and fine detail stay sharp.
Fast polishing leaves swirls, waves and rounded edges. We take the time each piece needs so the finish looks right from every angle.
Brass, stainless and aluminum each get their own wheels and compounds, so the surface is never burned, smeared or left hazy.
Every grit is fully removed by the next one before we move on. That is how a polish ends up clear instead of swirly.
Finished pieces are cleaned of all compound and inspected under strong light from several angles before they are approved.
A fresh mirror scratches easily, so each piece is wrapped in soft material and boxed to arrive just as it looked in our shop.
Small steps that keep metal bright
Bar rails, kitchen hardware and restaurant fixtures get cleaned constantly, and harsh cleaners are what dull them fastest. Mild soap and water, followed by a dry cloth, protects the finish on pieces in Milwaukee far better than sprays.
Avoid anything with bleach or strong acid near brass, copper and polished aluminum. If a busy fixture does lose its shine, it can come back to us for a quick repolish rather than a full rebuild.
Unsealed pieces can be kept bright with a gentle metal polish and a clean microfiber cloth. Rub lightly in the direction of the grain on satin finishes, and use a fresh area of the cloth as it picks up black residue. Abrasive pads and kitchen scrubbers will scratch a mirror finish in seconds.
Near the ocean, salt air speeds everything up. Rinse outdoor hardware with fresh water now and then and dry it. When a piece finally loses its shine, send it back. A repolish is usually quick because the hard cutting work was already done the first time.
Metal Finishing Gallery
A look at recent work from our Oceanside shop: plated hardware, lighting, hospitality and casino pieces, marine fittings and industrial parts.
Every job from Milwaukee starts with a quote and ends with an insured return. This is how the middle part goes.
Email photos of each piece, front and back, and the finish you want. You receive a written quote and lead time, usually the same business day. Wait for your quote number before you ship.
Wrap every piece on its own in soft cloth or bubble wrap so nothing rubs together in transit. Pad the box with at least three inches on every side and double box long rails or tubes.
Declare the full value with the carrier and email us the tracking number so we know what is coming and can log it the day it lands.
Once polishing is done we send photos for your approval, then pack your pieces in new materials and return them insured.
Every piece is polished, cleaned and inspected by hand in our own shop in North County San Diego.
Metal polishing, plating and finishing in San Diego County since 1989.
Milwaukee sits on Lake Michigan, a few time zones from our Oceanside shop. Every job there moves by photos and insured shipping, and we send photos for approval before the finished pieces head back.
The closest pages to Milwaukee are below, though we ship everywhere.
Frequently Asked Questions
Wondering what to expect? These answers cover what customers in Milwaukee want to know before they start.
Yes. Bar rails, foot rails and brass fixtures are polished by hand, and long pieces are double boxed. Send photos and a list for a written quote, and wait for your quote number before shipping.
Yes. We polish levers, hinges, knobs and railings together so every room looks the same. If the pieces are different metals, we adjust the finish on each so the set still reads as one.
Send photos first. We can tell you whether any cleaning would help or get in the way. Home polishing, especially with abrasive pads, can scratch the surface and make the repair bigger, so leave the piece as it is until we have talked.
Keep door hardware and railings clean and dry, and rinse off road salt or ice melt as soon as you can. A clear coat after polishing adds protection. If spots appear, send photos and we will advise.
Scratches and light pits are worked out wheel by wheel, from coarse to fine. Very deep gouges may stay slightly visible, since removing too much metal can change the shape. Photos help us tell you what is realistic before you ship.
Yes, and most of our work starts that way. We strip the old plating down to the base metal, repair what needs repair, then plate it fresh. New plating over a failing layer never lasts, so we don't do it.
We do. Along with single pieces for homeowners, we run batches of hundreds or thousands of parts for companies in California and other states. Send a photo of a sample, the quantity and the finish, and we'll quote the whole run.
Steel, stainless steel, aluminum, brass, bronze, copper, pot metal and zamak. Some of them need extra prep so the plating bonds well, and we'll tell you up front if your part does.