Deburring
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
A box of machined steel parts from Seattle is a good fit for tumbling. We smooth the edges, bring up an even finish and send everything back insured, packed by part number and ready for assembly and plating.
We test first, then run machined steel parts the whole way through
Small parts are what tumbling does best. A few dozen hinges, a box of machined fittings or a production run of buckles all go through the same way, and they come out feeling like they belong together. Parts can reach us from Seattle, Bellevue, Renton and Kirkland, or from any other town in the country.
Most of the work starts with a conversation. You tell us what the machined steel parts are made of, how many there are and what you want them to look like. We tell you honestly if tumbling is the right fit, or if a handful of pieces would be better polished by hand.
Once you're happy with the plan, we run a sample first. That gives you a look at the finish before we commit the rest of your machined steel parts, and we can send photos of the sample when you need them. It keeps surprises to a minimum on both sides.
Not sure which finish your parts need? Send photos, a part count and what the parts are used for. We will suggest a finish, run a few samples if needed, and send back a written quote.
Machined steel parts shipped from Seattle don't all need the same thing. Some need burrs gone, some need clean, burr free edges, and some are heading for assembly and plating next. Tell us which one fits your machined parts.
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Sharp corners are gently rounded and tool marks are softened. Parts feel better in the hand and plating covers edges more evenly.
Steel media presses the surface smooth instead of cutting it, bringing up a bright, clean shine on brass, copper and steel without buffing each piece.
A soft satin surface with worn, rounded edges that looks naturally aged. Popular on brass hinges, pulls, knobs and small decorative castings.
Tumbling first removes scale, light rust and surface marks, so copper, nickel or chrome goes on smoother and the finish looks better for less cost.
Plated or darkened parts are tumbled lightly so the high points wear through and glow, giving hardware a used, lived in character.
Drag the handle across each photo to see parts as they went into the tumbler and as they came out.
Before
Rough castings with parting lines and a dull, uneven skin. Tumbled in stages to smooth the surface and soften the edges into an even satin glow.
Before
Fresh off the machine with burrs, sharp corners and cutting oil. Deburred, edge smoothed and dried spot free, ready to go straight to plating.
Before
Bright, brand new brass that looked out of place in an old home. Darkened and tumbled so the edges wear back to brass, like decades of use.
You don't have to live nearby to work with us.
Customers all over the country pack their parts and ship them to our Oceanside shop. We finish them, inspect them and send them back insured. It starts with a few photos.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Each method has its place. The right one depends on how many parts you have, their shape and the look you want.
The small pieces that tumble with your parts decide how much metal is removed and how the surface looks. We choose them part by part.
Heavy and abrasive. Used to take down burrs, casting skin and tool marks on steel, stainless and other hard metals.
Lighter and gentler, so it smooths brass, aluminum and zinc without cutting too deep or rounding details away.
Fine and dense. It cuts very little and leaves a smooth, bright surface ready for plating or a final polish.
Pins, balls and small shapes that press the surface smooth rather than wearing it away, bringing up a bright shine.
Dry natural media used with polishing compound for a soft luster, and to dry parts without water spots.
The liquid in the tumbler cleans, protects parts from tarnish while they run and helps control how bright the finish turns out.
From first message to finished box, this is how a batch of machined steel parts moves through our shop.
Tell us what the parts are, how many you have and the finish you are after.
Ship from Seattle or Bellevue the same way: strong box, labeled bags, a printed sheet with your quote number and part numbers, and insurance for the full value of the machined steel parts.
We tumble a few pieces first so you can see and approve the finish before the full batch.
Parts run with the media and cycle time dialed in from the sample, in stages when needed.
Every batch is rinsed, dried spot free and checked for lodged media and missed burrs.
Parts move on to plating or patina, or are packed by part number and shipped back insured.
Hard metals and soft metals behave very differently in a tumbler. Each gets its own media and cycle time.
Take a beautiful satin or burnished finish and are the go to metals for the decorative tumbled look on hardware and castings.
Deburred and smoothed with cutting media, then rinsed and dried quickly so the bare steel does not flash rust before plating.
Tough enough for aggressive media. Tumbling gives stainless an even satin or bright burnished look without hand polishing.
Soft and easy to over process, so it runs with lighter media and shorter cycles to protect details and dimensions.
Soft castings with fine detail. Gentle media removes parting lines and flash without rounding off the design.
Light tumbling over plating creates a worn antique look. We review these first, since too much time cuts through the finish.
Since 1989 we have finished metal for manufacturers, designers and restorers. Tumbling, plating and patina all happen under one roof, so your parts go from rough to finished without changing hands.
Send photos and a part count and receive a no obligation quote within 24 hours.
Every batch leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
Small parts in bulk ship easily and affordably. Send a box from any state and get it back insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Everything we do in the tumbler, the finishes it creates and the services that often follow.
Tumbling looks easy from the outside. Getting the same result on hundreds of parts without damaging a single one takes care.
A few parts are run and approved before the full batch, so there are no surprises when the rest come out.
Media size and type are matched to the metal and the holes in each part, to avoid lodging and over cutting.
Finished parts are checked for leftover burrs, stuck media and water spots before they are packed.
Different parts are run and packed separately and labeled the way you sent them, ready for your stock shelf.
A lot of different trades use tumbled parts, and machined steel parts turn up in many of them. If yours isn't listed here, send photos of your machined parts anyway and we'll tell you if tumbling suits them.
Small brass trim, table hardware, rail fittings and decorative accents finished in matching batches, so replacement pieces blend in with the rest. Trusted by casino resorts across North County San Diego.
Hinges, pulls, knobs and escutcheons with a soft tumbled finish that matches across an entire home or project.
Production parts deburred and smoothed in volume, ready for plating, coating or assembly.
Furniture makers use tumbled hardware for a warm, hand finished look on cabinets, chests and tables.
Small lamp parts, finials, canopies and fittings given an even finish before plating or patina.
Buckles, keychains, tags and other small metal goods finished in batches for makers and growing brands.
Get machined steel parts right on the first run
A little planning goes a long way with tumbling machined steel parts. Before you ship from Seattle, sort your machined parts by metal and by part number. Brass, steel and aluminum run best in their own loads, so mixing your machined parts in one bag only slows things down.
Next, tell us what the machined steel parts are for and what you expect them to look like. Machined parts headed for assembly and plating need a different finish than parts left bare, and a photo of the look you want is worth a page of description.
Point out holes, slots and threads. Media can wedge into openings that are close to its size, so we pick a media shape and size that stays clear of them. Telling us the hole sizes up front saves time for everyone.
Finally, let us know what happens next. Parts that will be plated get a different finish than parts that will be lacquered or left bare, and parts headed for an assembly line can be packed the way your team needs them.
Tumble Finishing Gallery
Hardware, castings and production parts deburred, smoothed and tumbled in our Oceanside shop.
Here's a plain walkthrough for mailing machined steel parts from Seattle. Take your time with it, since a well packed box of machined parts is half the job.
Send photos, the metal type and a part count. You will get a written price and lead time, usually the same business day. Please wait for your quote number before shipping.
Keep each part type in its own labeled bag. Mixed parts take longer to sort and hard pieces can mark softer ones on the way here.
Small parts are heavy, so use a strong box and fill the empty space. Insure the box for its real value and email us the tracking number.
We send photos of the sample or finished batch when needed, then pack everything by part number and ship it back insured.
Local shops and makers are welcome to drop off parts for tumbling at our facility in North County San Diego.
Tumble finishing, plating and patina under one roof since 1989.
Seattle is on Puget Sound in western Washington. That puts us a good distance apart, which is why we handle tumbling by mail and keep every step in writing, from the quote for your machined steel parts to the return shipment.
Browse tumble finishing pages for more places near Seattle, Kirkland and the towns around them.
Frequently Asked Questions
Short answers first, details second, for machined steel parts. Use these to plan a batch of machined parts from Seattle, and call if you'd like to talk it through.
Yes. Our process doesn't change by location, so shipping machined steel parts from Bellevue, Renton or Seattle follows the same steps: photos, a quote number, labeled bags, a strong insured box and a tracking number sent by email.
Tumbling removes very little metal from machined steel parts, but it does round corners. If your machined parts have tight tolerances or edges that must stay sharp, tell us before we quote and we'll plan around it. We can run a sample of your machined parts first so you can measure a finished piece.
Tumbling shines when you have a few dozen machined steel parts or more, up to full production runs. With a handful of machined parts, hand polishing may cost less, and we'll say so honestly once we see your photos and the part count.
Yes, but tell us about them first. Media can wedge into openings close to its own size, so we pick a shape and size that stays clear of the openings on your machined steel parts. Send the hole sizes of your machined parts with your photos, and every finished batch is checked for lodged media.
We choose by metal. Ceramic cuts fast on hard metals, plastic is gentler on brass, aluminum and zinc, porcelain leaves a fine smooth surface, and stainless steel shapes burnish, so we match the media to your machined steel parts. For machined parts, walnut shell and corn cob handle dry finishing and drying when it's needed.
The shop is open Monday to Friday from 8 AM to 5 PM and Saturday from 9 AM to 2 PM. We're closed on Sunday. Shipments are received Monday to Friday, 8 AM to 4 PM Pacific.
Usually, yes. Send a photo of the piece you want to match, or ship it along with your parts as a sample. We adjust the finish until the new work sits right next to the old.
When the work is done and inspected, we pack your parts in fresh materials and ship them back insured. If you're close to Oceanside, you're welcome to pick them up instead.