Show Chrome Restoration
Triple plated in copper, nickel and chrome and buffed by hand between layers, for the deep, wet shine that makes small trim stand out on a finished build.
Thinking of replacing worn trim in Portland? Try restoring it first. We rebuild the surface by hand and plate it in chrome or nickel, and the quote is free.
Since 1989 we have been saving parts people care about
Getting ready for a show means looking closely at every small detail, because judges and other owners will. Plating that looks fine from a few feet away can show haze or pitting up close, and that is where points get lost.
Our show quality finish is built for that kind of scrutiny. Pits are filled and leveled, layers are buffed by hand, and each part is checked under bright light before it ships. If your event has a date, tell us at the start so we can talk about timing.
Club members in Portland, Beaverton and Gresham can send photos for a free written quote. You do not need to live in California to use us. Small parts ship from any state, and we send them home insured. Standard turnaround is 3 to 5 weeks, and expedited work of 5 to 7 business days is possible when our schedule allows.
Small parts are our sweet spot, and they are easy and affordable to ship from anywhere in the country. Send a few photos, tell us what the parts came from and how you want them to look, and we will send back a written quote.
A good finish starts long before the chrome goes on. These services cover the repair, nickel, copper and chrome work we do on small parts, with extra care for fragile pot metal.
Triple plated in copper, nickel and chrome and buffed by hand between layers, for the deep, wet shine that makes small trim stand out on a finished build.
Pitted and blistered pot metal is stripped, filled and leveled in copper before it is plated. Slow, careful work that saves parts most shops send back.
Bright or satin nickel for earlier cars and motorcycles that left the factory with a softer, warmer shine than modern chrome.
Knobs, handles, window cranks, bezels and switch plates restored so the inside of your classic matches the outside.
Levers, clamps, mirror stems, small covers and controls replated so a vintage bike looks right from every angle.
Original bolts, nuts, clips and small brackets cleaned and replated, so you keep correct factory hardware instead of buying generic replacements.
Drag the handle on any photo to see the part as it arrived and as it left our shop.
Before
Bubbled, flaking chrome over pitted pot metal. Stripped, filled in copper, leveled by hand and triple plated in show chrome.
Before
A thin steel ring with surface rust and worn plating. Stripped, polished and finished in bright nickel and chrome.
Before
A coffee can full of rusty original bolts, clips and small brackets. Cleaned, sorted and replated as a matching set, ready to go back on.
Over three decades of plating, one shop in Oceanside.
Every part is stripped, prepped, plated and inspected in our own building, and our work comes with a 12 month workmanship guarantee. Send photos and we'll take it from there.
Owners, shops and collectors trust us with parts that are hard or impossible to replace.
Not every part needs the same treatment. Picking the right level for each piece keeps your budget where it matters most.
Classic parts were made from a handful of metals, and each one needs its own preparation before it can shine again.
Used for door handles, hood ornaments, interior knobs and many trim pieces. We stop the pitting, fill it in copper and level it by hand before plating.
Brackets, bezels, levers and hardware. Rust is removed down to clean metal, then the part is polished and plated in copper, nickel and chrome.
Common on early vehicles, lamps and fittings. Brass takes nickel and chrome beautifully once it has been cleaned and polished.
Some trim pieces and motorcycle covers are aluminum. They need a special pretreatment before plating, so we review each piece before quoting.
Many classic trim pieces are stainless and may only need polishing. If yours does need plating, it gets a nickel strike first so the finish bonds.
Older fittings and hardware in copper or bronze clean up well and plate easily, whether you want them chromed or nickeled.
Wondering what the process looks like from Portland? Here is the short version, from photos to the box at your door.
Photograph each part from a few angles and tell us what it came from and the finish you want.
We check the condition and the metal, then send a written quote and lead time within 24 business hours.
Wrap every piece separately, label small hardware and ship your parts to Oceanside with the quote number inside. Email us the tracking number once they are on the way.
Old plating and rust come off, pits are filled, and the surface is leveled and polished by hand.
Copper, nickel and chrome go on in layers, then every part is inspected, packed and returned insured.
What Size Parts Make Sense to Ship
Most of the classic and vintage work that comes through our door fits in a small box. Handles, knobs, bezels, levers, brackets, hardware and short trim pieces are light, they pack easily and the shipping cost both ways stays reasonable. For owners outside California, these are the parts where mailing them to a specialty shop makes the most sense.
Larger pieces like bumpers, grilles and full length trim are a different story. We can plate them, but they need oversized boxes or freight, and the trip here and back can add up quickly. If you live in Southern California, the easiest option is simply to bring them to the shop.
If you are farther away and still want us to handle a large part, we are happy to take a look. Send photos and measurements, we will quote the plating, and you can weigh that against the shipping before you decide. No pressure either way.
A quick list of the classic and vintage parts and finishes we handle most often.
We have been restoring plated parts since 1989. Car owners, motorcycle restorers and private collectors send us the pieces they cannot replace, because we take the time to save them.
Send photos of your parts and get a no obligation quote within 24 hours.
Every restored part is backed by our craftsmanship guarantee. If something is not right, we make it right.
Small parts travel easily from any state and come back to you insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
On a classic, people look closely. Every shortcut in stripping or prep shows up later as peeling, pits or haze, so we do the slow work first.
Old chrome and nickel are fully removed, so the new layers bond to clean metal instead of a finish that is already failing.
Copper is built up and leveled by hand until pits disappear, which is what separates a show finish from a quick rechrome.
Every part is checked for haze, pits and missed spots before it is approved to leave the shop.
Each restored part is wrapped on its own, so fresh chrome never rubs against another piece on the way home.
Our work is a good fit for anyone who cares how a classic looks, from private owners in Portland to shops that rebuild cars and bikes for a living.
Antique slot machine trim, handles and casino collectibles restored to their original shine. Casino resorts across North County San Diego trust us with their decorative metal work.
Private owners and restoration shops rebuilding American and European classics, one small part at a time.
Riders and builders bringing old bikes back to original condition, or giving a custom build a clean, bright finish.
Shops that need dependable show chrome on small parts, with clear quotes and consistent quality job after job.
Owners getting ready for shows and judging who need finishes that hold up under a very close look.
Collectors of automobilia and vintage hardware who want a treasured piece to look the way it did when it was new.
A few minutes of care protects your investment
Portland has a long rainy season, so parts rarely dry on their own and a towel after every wet drive is a smart habit. Keep restored parts clean and dry, and wipe off fingerprints and water spots when you see them instead of letting them sit.
Set a reminder to wax your restored trim every few months, and the finish will keep looking its best. When you reinstall a restored part, tighten fasteners by hand first and avoid slipping with a tool, since a skidding wrench can mark fresh plating.
Skip steel wool, rubbing compound and harsh wheel cleaners. They scratch the surface and can cut through the chrome to the nickel underneath. If a spot needs more than soap, use a polish made for chrome and a soft cloth. Nickel is softer than chrome, so treat nickel parts gently and always dry them well.
For storage, keep parts and vehicles somewhere dry under a breathable cover, never plastic that traps moisture. If you notice small rust spots or lifting plating, send us a photo. Catching a problem early is always easier than waiting.
Restored Parts Gallery
Door handles, bezels, cranks, levers and original hardware from classic cars and vintage motorcycles, restored in our Oceanside shop.
A few minutes of packing protects hours of work. Follow these steps and your parts from Portland will reach us in good shape.
Send photos of every part and the finish you want. You will get a written quote and lead time, usually the same business day. Please wait for your quote number before you ship.
Wrap each part on its own so metal never touches metal, and use a box just large enough for the parts and padding. A snug box keeps parts safe and keeps the shipping cost down.
Bag and label small hardware by where it goes so sets come back together easily. Declare the real value with the carrier and email us the tracking number.
When your parts are finished we send photos for your approval, then pack them in fresh materials and ship them back insured.
Local car and motorcycle owners are welcome to drop off parts at our shop in North County San Diego. It is also the easiest option for larger pieces.
Chrome, nickel and copper restoration for classic and vintage parts since 1989.
You do not need to visit. Mail your parts from Portland to 2613 Temple Heights Dr, Ste G, Oceanside, CA 92056, and we send them home insured after you approve the finished work.
We restore classic parts for owners across the region, and here are cities close to Portland.
Frequently Asked Questions
Not finding what you need? Call us at (760) 746 3378 or send photos, and we will answer you directly.
Plating cannot hold a broken part together, so cracks or heavy corrosion may mean the part cannot be restored. We say so upfront, after looking at your photos, so you do not pay for work that will not last. Many parts look worse than they are.
You are welcome to if you are ever in Southern California. Our shop is in Oceanside, open Monday to Friday 8 AM to 5 PM and Saturday 9 AM to 2 PM. Otherwise, shipping works well for small parts.
Wrap each part separately so metal never touches metal, and use a box just large enough for the parts and padding. Bag and label small hardware by where it goes. A snug box keeps parts safe and keeps shipping costs down.
Yes, just keep them organized. Bag and label parts by project and list the finish for each on your printed sheet. We keep every project's pieces together, so a car and a motorcycle can travel in one box.
Some can. Aluminum needs special pretreatment before plating, so we review each piece before we quote it. Send a photo and tell us what the part is. We will say whether plating makes sense or whether polishing might be the better choice.
Yes, and most of our work starts that way. We strip the old plating down to the base metal, repair what needs repair, then plate it fresh. New plating over a failing layer never lasts, so we don't do it.
We do. Along with single pieces for homeowners, we run batches of hundreds or thousands of parts for companies in California and other states. Send a photo of a sample, the quantity and the finish, and we'll quote the whole run.
Steel, stainless steel, aluminum, brass, bronze, copper, pot metal and zamak. Some of them need extra prep so the plating bonds well, and we'll tell you up front if your part does.