Skip to content

Omaha Metal Polishing Company

That old railing still has plenty of life. We will show you

We have been polishing metal by hand since 1989. If something in Omaha has gone dull, scratched or tarnished, send us photos and we will tell you what is possible, what it costs and how long it takes, all in writing and all for free.

Certified, Approved and Verified

Looking for Metal Polishing in Omaha?

From Omaha to our polishing room, one careful box

Hardware, rails, lighting, boat fittings and family heirlooms all end up on our polishing wheels. They look different, but they have one thing in common: they look better when somebody takes the time. Our shop has been that somebody for metal from all over since 1989.

We check the metal first. Solid brass and copper polish up warm and deep, stainless takes a crisp shine and aluminum needs gentle compounds. Plated pieces need extra care, because polishing too hard can cut straight through the plating.

Send photos from Omaha, Bellevue or Papillion and we tell you what we see. The check costs nothing, the quote is written and nothing happens to your piece until you say yes.

Send us a few photos and tell us how the piece is used. We will tell you whether polishing alone will get you there or whether it needs plating, explain what finish makes sense and send back a written quote.

What We Do

Metal Polishing Services

Every finish below is cut, buffed and colored in our own shop, not sent out. Choose the one that fits how your piece is used, and ask us if you are not sure which that is.

Brass door lever polished to a mirror finish

Mirror Polishing

Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.

Stainless steel handle with a brushed satin grain

Satin and Brushed Finishes

A fine, even grain that softens glare and hides fingerprints. A smart choice for handrails, pulls and levers that get touched all day long.

Scratched brass plate being restored by polishing

Scratch and Pit Repair

Deep scratches, light pitting and tool marks are worked out wheel by wheel, so the finished surface is smooth and even instead of wavy.

Polished brass and copper fixtures on a workbench

Brass and Copper Polishing

Tarnish and old lacquer come off, the metal is brought back to its warm color and sealed with a clear coat if you want it to stay that way.

Polished stainless steel and aluminum hardware

Stainless and Aluminum

Each metal needs its own compounds. We polish stainless to a crisp shine and aluminum to a bright finish without burning or smearing the surface.

Metal part polished smooth before plating

Polishing Before Plating

Plating copies the surface under it. We polish parts flat and clean before nickel, chrome or gold so the final finish comes out flawless.

Restoration Results

Before and After

Drag the handle on any photo to see how the piece arrived and how it looked when it left our polishing room.

Brass door lever after mirror polishing
Tarnished brass door lever before polishing Before
After

Solid Brass Door Lever

Dark tarnish, fingerprint stains and old lacquer flaking at the edges. Stripped, polished to a mirror and sealed with a fresh clear coat.

MIRROR POLISH BRASS LACQUERED
Stainless steel bar rail after polishing
Scratched stainless steel bar rail before polishing Before
After

Stainless Bar Foot Rail

Years of scuffs from shoes and stools. Scratches were cut out and the rail was brought back to a bright, uniform shine along its full length.

BRIGHT BUFF STAINLESS HOSPITALITY
Cast aluminum wall sconce after polishing
Oxidized cast aluminum wall sconce before polishing Before
After

Cast Aluminum Sconce

Chalky gray oxidation over every surface. Hand polished into the curves and details until the aluminum showed a clean, bright finish again.

HAND POLISHED ALUMINUM LIGHTING
Know the Price First

See the price before you ship a thing.

Snap a few photos from different angles and tell us the finish you have in mind. You'll get a written quote and a realistic lead time. Standard work takes 3 to 5 weeks, and expedited orders are possible when the schedule allows.

Tap to add photos (up to 5). JPG, PNG, WEBP or iPhone HEIC.
    Choosing Your Finish

    Three Levels of Polish

    More shine is not always better. The right level depends on how the piece is used, how often it is touched and the look you want.

    Low glare

    Satin and Brushed

    • Soft, even grain
    • Hides fingerprints and wear
    • Handrails, levers and pulls
    • Easy to touch up later
    • Modern, understated look
    Everyday shine

    Bright Buff

    • Clean, glossy surface
    • Light marks may remain
    • Hardware and fixtures
    • Good value on larger jobs
    • Bright but not a mirror
    Showpiece

    Mirror Finish

    • Cut, buffed and colored
    • Reflects like glass
    • Lighting, trim and decor
    • Most hand work, highest cost
    • Shows every fingerprint
    What We Can Finish

    Metals We Polish

    Each metal has its own hardness, color and quirks. Knowing them is what keeps a polish from turning out wavy, burned or hazy.

    Most popular

    Brass and Bronze

    Polish up beautifully and take a deep mirror. Old lacquer is stripped first, then the metal is buffed and resealed so the warm color holds.

    All finishes

    Copper

    Soft and quick to scratch, so it is buffed gently with fine compounds. Finished bright for a classic look or left to age naturally.

    All finishes

    Stainless Steel

    Hard and tough to cut, but it holds a polish for years. Ideal for rails, kitchen and bar equipment and marine fittings near the coast.

    All finishes

    Aluminum

    Turns dull and chalky outdoors. We polish it bright and can seal it to slow the oxidation that brings the haze back.

    Ask us first

    Steel

    Polishes well but rusts if left bare, so it usually gets plated or coated after polishing. We will explain the options before we start.

    Handled with care

    Zinc Die Cast and Pot Metal

    Soft castings with a thin skin. Pushing too hard opens pits, so we polish these by hand with light pressure and know when to stop.

    How It Works

    Our Metal Polishing Process

    A clear path from Omaha to a finished piece, with a written quote and approval photos along the way.

    1

    Send Photos

    Show us the piece, the damage and the look you want: mirror, bright or satin.

    2

    Get Your Quote

    We check the metal and the condition, then send a written quote within 24 business hours.

    3

    Ship or Drop Off

    Pack each piece separately, double box long rails or tubes and put your quote number inside. Ship it insured to Oceanside, then send us the tracking number so we can watch for it.

    4

    Cut and Buff

    Old lacquer and tarnish come off, then scratches are worked out from coarse to fine wheels.

    5

    Color and Inspect

    A final color buff, a full cleaning, an optional clear coat and a close look under bright light.

    Polish or Plate?

    Sometimes Polishing Is All It Takes

    Many customers call asking for plating when their piece only needs a good polish. If the part is solid brass, copper, stainless or aluminum and the damage is on the surface, polishing alone brings it back for less money and keeps the original metal you already like.

    Plating is the answer when the color needs to change, when the metal underneath is steel that will rust, or when the old plating has already worn through to a different color. In those cases we still polish first, because a plated finish only looks as good as the surface under it.

    Not sure which group your piece falls in? Look at a worn corner or the back side. If the color is the same all the way through, it is probably solid and a polish will do. If you see a different color peeking through, it is plated, and we will talk you through replating.

    What Our Clients Say

    Trusted by Professionals

    From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.

    Metal Polishing Catalog

    Polishing Finishes and Services

    Every polished finish and restoration service we handle in house.

    Polished Finishes

    • Mirror Polish
    • Color Buff
    • Bright Buff
    • Satin Finish
    • Straight Grain Brushed
    • Satin and Mirror Combination
    • Clear Lacquer Topcoat

    Repair and Restoration

    • Scratch Removal
    • Light Pit Removal
    • Tarnish and Oxidation Removal
    • Old Lacquer Stripping
    • Tool and Grinding Mark Removal
    • Detail and Edge Hand Work
    • Polishing Before Plating

    Metals We Polish

    • Brass
    • Bronze
    • Copper
    • Stainless Steel
    • Aluminum
    • Steel
    • Zinc Die Cast and Pot Metal
    • Custom Sample Match
    Polished brass and stainless pieces on a workbench in the shop
    Plating line at Decorative Metal Coatings
    35+ Years of Expertise
    Take a Moment to Learn More

    About Decorative Metal Coatings

    Polishing wheels have been turning in our shop since 1989. It is the skill every other finish we offer depends on, and the reason homeowners, designers and casino resorts keep sending us their metal.

    Free Estimates Available

    Send a photo of your piece and receive a no obligation quote within 24 hours.

    Quality Guaranteed

    Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.

    Ship From Anywhere in the US

    One heirloom or a full hotel renovation, shipped to us from any state and returned insured.

    Fast Turnaround Times

    Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.

    Who We Serve

    Who Trusts Us to Polish Their Metal

    Our polishing room handles everything from a single heirloom to a full hotel renovation. These six groups sum up the work.

    Polished brass and stainless trim along a casino gaming table and bar

    Casinos and Gaming

    Slot machine trim, table rails, bar fixtures and decorative accents polished to shine under bright lights day and night. Casino resorts across North County San Diego trust us with their gaming floors.

    Polished brass bar rail and fixtures in a restaurant

    Hotels and Restaurants

    Bar rails, foot rests, door push plates and lobby fixtures brought back to a bright, welcoming finish.

    Polished door handles, hinges and cabinet pulls

    Architectural Hardware

    Door levers, hinges, knobs and railings polished as a matched set so every room looks consistent.

    Polished brass chandelier arms and lamp bases

    Lighting and Decor

    Chandeliers, sconces, lamp bases and decorative pieces polished by hand, curves and details included.

    Polished stainless steel cleats and rail fittings on a dock

    Marine Hardware

    Stainless cleats, rail fittings and bronze hardware cleaned of salt haze and polished to stand up to coastal air.

    Polished antique brass candlesticks and a vintage tray

    Antiques and Heirlooms

    Family pieces, candlesticks and collectibles polished carefully so engraving, stamps and fine detail stay sharp.

    Our Commitment

    Polishing Done With Patience

    Fast polishing leaves swirls, waves and rounded edges. We take the time each piece needs so the finish looks right from every angle.

    The Right Compound

    Brass, stainless and aluminum each get their own wheels and compounds, so the surface is never burned, smeared or left hazy.

    No Skipped Steps

    Every grit is fully removed by the next one before we move on. That is how a polish ends up clear instead of swirly.

    Checked Under Bright Light

    Finished pieces are cleaned of all compound and inspected under strong light from several angles before they are approved.

    Wrapped Before It Leaves

    A fresh mirror scratches easily, so each piece is wrapped in soft material and boxed to arrive just as it looked in our shop.

    What We Do Differently

    • We check whether a piece is solid or plated before polishing
    • Sharp edges, lettering and details are kept crisp
    • Brass and copper are sealed when you want the color to last
    • We send photos if we find damage that changes the plan
    • Every piece is inspected before it is packed

    What You May Experience Elsewhere

    • Plated hardware polished right through to the base metal
    • Swirl marks and haze left from skipped steps
    • Rounded edges and softened engraving
    • Compound residue left in corners and recesses
    • Unsealed brass that tarnishes again within weeks

    Keeping Polished Pieces Bright

    Care that keeps metal looking new

    Aluminum turns chalky when it oxidizes, and the haze comes back sooner outdoors. A gentle wash and a dry cloth slow it down, and a clear sealer after polishing slows it even more.

    Big temperature swings and winter salt are hard on outdoor metal, so wipe it dry and keep a clear coat on it. Skip harsh cleaners on aluminum, since they can leave dark streaks that are hard to remove.

    Unsealed pieces can be kept bright with a gentle metal polish and a clean microfiber cloth. Rub lightly in the direction of the grain on satin finishes, and use a fresh area of the cloth as it picks up black residue. Abrasive pads and kitchen scrubbers will scratch a mirror finish in seconds.

    Near the ocean, salt air speeds everything up. Rinse outdoor hardware with fresh water now and then and dry it. When a piece finally loses its shine, send it back. A repolish is usually quick because the hard cutting work was already done the first time.

    Nationwide Service

    Ship Us Your Pieces From Anywhere in the US

    A fresh polish scratches easily, so packing matters in both directions. Here is how to send your pieces safely.

    01

    Get a quote first

    Email photos of each piece, front and back, and the finish you want. You receive a written quote and lead time, usually the same business day. Wait for your quote number before you ship.

    02

    Protect polished surfaces

    Wrap every piece on its own in soft cloth or bubble wrap so nothing rubs together in transit. Pad the box with at least three inches on every side and double box long rails or tubes.

    03

    Insure and send tracking

    Declare the full value with the carrier and email us the tracking number so we know what is coming and can log it the day it lands.

    04

    Approve, then we ship back

    Once polishing is done we send photos for your approval, then pack your pieces in new materials and return them insured.

    Visit Us

    Our Location

    Every piece is polished, cleaned and inspected by hand in our own shop in North County San Diego.

    Decorative Metal Coatings

    Metal polishing, plating and finishing in San Diego County since 1989.

    Business Hours

    • Monday to Friday 8:00 AM to 5:00 PM
    • Saturday 9:00 AM to 2:00 PM
    • Sunday Closed

    From the Midwest to Oceanside

    Omaha runs on Central time, two hours ahead of our shop, so a call after your morning coffee reaches us during business hours. Boxes travel by insured carrier, and Bellevue and Papillion follow the same steps, with approval photos before anything returns.

    Nearby Cities We Serve

    Not far from Omaha, these cities follow the same quote and shipping steps.

    Ask Us About Polishing in Omaha

    Frequently Asked Questions

    Most questions come down to cost, timing and what finish to pick. Here is what we tell people who ask.

    Yes. Estate and antique finds are often lacquered brass, copper or plated pieces, and we check which before we touch them. Send photos of each item, front and back, and we tell you what polishing can do and what it might risk.

    Bare brass will tarnish over time. If you want the color to last, we can seal it with a clear lacquer coat after polishing. Tell us when you request your quote and we price it with the seal.

    Yes, but bare steel rusts, so it usually gets plated or coated after polishing. We explain the options before we start, so you know what the finished piece needs to stay protected.

    Salt and slush can spot and haze bare metal on entry rails and handles. Wipe it off with a damp cloth when you can, and dry the surface afterward. If spots set in, send photos and we tell you whether a polish clears them.

    Yes, with care. These soft castings have a thin skin, and pushing too hard opens pits. We polish them by hand with light pressure and know when to stop.

    The shop is open Monday to Friday from 8 AM to 5 PM and Saturday from 9 AM to 2 PM. We're closed on Sunday. Shipments are received Monday to Friday, 8 AM to 4 PM Pacific.

    Usually, yes. Send a photo of the piece you want to match, or ship it along with your parts as a sample. We adjust the finish until the new work sits right next to the old.

    When the work is done and inspected, we pack your parts in fresh materials and ship them back insured. If you're close to Oceanside, you're welcome to pick them up instead.