Deburring
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
We tumble finish small metal parts shipped to us from Newton, or from anywhere else in the country. Deburring, edge smoothing and burnishing are done by the batch, with a sample first. Send photos and a part count, and we'll send back a free written quote.
Not sure what finish you need? Start with photos
Plenty of people know their parts look wrong but can't say what they need. That's fine. Send photos of what you have and what you'd like it to look like, and tell us what the parts are used for and roughly how many you have.
From there we suggest a finish. It might be satin tumbled, bright burnished, soft matte or an aged look. We may suggest a sample run first so you can see it on your own parts before the full batch, and a photo review costs nothing if you aren't sure tumbling is the right fit.
Parts from Newton, Hesston, North Newton or anywhere else travel the same way. Ship them insured to Oceanside once your quote number is in hand. Bag each part number on its own and put a printed sheet in the box with your name, phone, email and quote number, so we know right away whose parts they are.
Not sure which finish your parts need? Send photos, a part count and what the parts are used for. We will suggest a finish, run a few samples if needed, and send back a written quote.
Whatever the metal, we match the finish to the job. Parts shipped from Newton might need burrs removed, edges rounded, a bright burnished shine or a soft tumbled look that feels aged.
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Sharp corners are gently rounded and tool marks are softened. Parts feel better in the hand and plating covers edges more evenly.
Steel media presses the surface smooth instead of cutting it, bringing up a bright, clean shine on brass, copper and steel without buffing each piece.
A soft satin surface with worn, rounded edges that looks naturally aged. Popular on brass hinges, pulls, knobs and small decorative castings.
Tumbling first removes scale, light rust and surface marks, so copper, nickel or chrome goes on smoother and the finish looks better for less cost.
Plated or darkened parts are tumbled lightly so the high points wear through and glow, giving hardware a used, lived in character.
Drag the handle across each photo to see parts as they went into the tumbler and as they came out.
Before
Rough castings with parting lines and a dull, uneven skin. Tumbled in stages to smooth the surface and soften the edges into an even satin glow.
Before
Fresh off the machine with burrs, sharp corners and cutting oil. Deburred, edge smoothed and dried spot free, ready to go straight to plating.
Before
Bright, brand new brass that looked out of place in an old home. Darkened and tumbled so the edges wear back to brass, like decades of use.
You don't have to live nearby to work with us.
Customers all over the country pack their parts and ship them to our Oceanside shop. We finish them, inspect them and send them back insured. It starts with a few photos.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Each method has its place. The right one depends on how many parts you have, their shape and the look you want.
The small pieces that tumble with your parts decide how much metal is removed and how the surface looks. We choose them part by part.
Heavy and abrasive. Used to take down burrs, casting skin and tool marks on steel, stainless and other hard metals.
Lighter and gentler, so it smooths brass, aluminum and zinc without cutting too deep or rounding details away.
Fine and dense. It cuts very little and leaves a smooth, bright surface ready for plating or a final polish.
Pins, balls and small shapes that press the surface smooth rather than wearing it away, bringing up a bright shine.
Dry natural media used with polishing compound for a soft luster, and to dry parts without water spots.
The liquid in the tumbler cleans, protects parts from tarnish while they run and helps control how bright the finish turns out.
Your parts follow these steps from the moment you ask for a quote in Newton until they come home.
Tell us what the parts are, how many you have and the finish you are after.
Once your quote number arrives, ship your parts from Newton to our receiving dock in Oceanside. A strong box, labeled bags and insurance for the real value will keep everything safe on the road.
We tumble a few pieces first so you can see and approve the finish before the full batch.
Parts run with the media and cycle time dialed in from the sample, in stages when needed.
Every batch is rinsed, dried spot free and checked for lodged media and missed burrs.
Parts move on to plating or patina, or are packed by part number and shipped back insured.
Hard metals and soft metals behave very differently in a tumbler. Each gets its own media and cycle time.
Take a beautiful satin or burnished finish and are the go to metals for the decorative tumbled look on hardware and castings.
Deburred and smoothed with cutting media, then rinsed and dried quickly so the bare steel does not flash rust before plating.
Tough enough for aggressive media. Tumbling gives stainless an even satin or bright burnished look without hand polishing.
Soft and easy to over process, so it runs with lighter media and shorter cycles to protect details and dimensions.
Soft castings with fine detail. Gentle media removes parting lines and flash without rounding off the design.
Light tumbling over plating creates a worn antique look. We review these first, since too much time cuts through the finish.
Since 1989 we have finished metal for manufacturers, designers and restorers. Tumbling, plating and patina all happen under one roof, so your parts go from rough to finished without changing hands.
Send photos and a part count and receive a no obligation quote within 24 hours.
Every batch leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
Small parts in bulk ship easily and affordably. Send a box from any state and get it back insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Everything we do in the tumbler, the finishes it creates and the services that often follow.
Tumbling looks easy from the outside. Getting the same result on hundreds of parts without damaging a single one takes care.
A few parts are run and approved before the full batch, so there are no surprises when the rest come out.
Media size and type are matched to the metal and the holes in each part, to avoid lodging and over cutting.
Finished parts are checked for leftover burrs, stuck media and water spots before they are packed.
Different parts are run and packed separately and labeled the way you sent them, ready for your stock shelf.
Casinos, machine shops, furniture makers and small brands all rely on tumbled metal. Here's who we finish for, and where a shipped batch from Newton tends to fit in.
Small brass trim, table hardware, rail fittings and decorative accents finished in matching batches, so replacement pieces blend in with the rest. Trusted by casino resorts across North County San Diego.
Hinges, pulls, knobs and escutcheons with a soft tumbled finish that matches across an entire home or project.
Production parts deburred and smoothed in volume, ready for plating, coating or assembly.
Furniture makers use tumbled hardware for a warm, hand finished look on cabinets, chests and tables.
Small lamp parts, finials, canopies and fittings given an even finish before plating or patina.
Buckles, keychains, tags and other small metal goods finished in batches for makers and growing brands.
Get it right on the first run
A little planning goes a long way with tumbling. Before you ship from Newton, sort your parts by metal and by part number. Brass, steel and aluminum run best in their own loads, so mixing them in one bag only slows things down.
Next, tell us what the parts will be used for and what you expect them to look like. A part that sits in a drawer needs a different finish than one that gets handled all day, and a photo of the look you want is worth a page of description.
Point out holes, slots and threads. Media can wedge into openings that are close to its size, so we pick a media shape and size that stays clear of them. Telling us the hole sizes up front saves time for everyone.
Finally, let us know what happens next. Parts that will be plated get a different finish than parts that will be lacquered or left bare, and parts headed for an assembly line can be packed the way your team needs them.
Tumble Finishing Gallery
Hardware, castings and production parts deburred, smoothed and tumbled in our Oceanside shop.
Small metal parts travel well when they're packed right. Here's how to send a box from Newton to our Oceanside shop.
Send photos, the metal type and a part count. You will get a written price and lead time, usually the same business day. Please wait for your quote number before shipping.
Keep each part type in its own labeled bag. Mixed parts take longer to sort and hard pieces can mark softer ones on the way here.
Small parts are heavy, so use a strong box and fill the empty space. Insure the box for its real value and email us the tracking number.
We send photos of the sample or finished batch when needed, then pack everything by part number and ship it back insured.
Local shops and makers are welcome to drop off parts for tumbling at our facility in North County San Diego.
Tumble finishing, plating and patina under one roof since 1989.
Newton is north of Wichita along Interstate 135, and our shop is far to the west. Small parts ship easily, though. Start with photos and a quote, then send a strong box with each part number bagged and labeled.
Nearby cities have their own tumble finishing pages too, listed here.
Frequently Asked Questions
Tumbling is easy to start but has a few details worth knowing. Here are answers that should help anyone sending parts from Newton.
Put in a printed sheet with your name, phone number and email, the quote number, part numbers with quantities, the finish you want and any next step like plating. Keep each part number in its own labeled bag.
Tumbling removes very little metal, but it does round corners. If your parts have tight tolerances or edges that must stay sharp, tell us before we quote and we'll plan around it. We can also run a sample first so you can measure a finished piece before the full batch.
Yes, but tell us about them first. Media can wedge into openings close to its own size, so we pick a shape and size that stays clear. Send the hole sizes along with your photos and part count, and we'll plan the load. Every finished batch is checked for lodged media.
Not when it's done right. Soft metals run with lighter media and shorter cycles so details and dimensions are protected. We never mix hard and soft parts in the same load, because heavy pieces can ding and scratch softer ones.
Burnishing uses small steel shapes that press the surface smooth instead of cutting it away. The result is a bright, clean shine on brass, copper and steel without buffing each piece by hand, and almost no metal is removed in the process.
The shop is open Monday to Friday from 8 AM to 5 PM and Saturday from 9 AM to 2 PM. We're closed on Sunday. Shipments are received Monday to Friday, 8 AM to 4 PM Pacific.
Usually, yes. Send a photo of the piece you want to match, or ship it along with your parts as a sample. We adjust the finish until the new work sits right next to the old.
When the work is done and inspected, we pack your parts in fresh materials and ship them back insured. If you're close to Oceanside, you're welcome to pick them up instead.