Show Chrome Restoration
Triple plated in copper, nickel and chrome and buffed by hand between layers, for the deep, wet shine that makes small trim stand out on a finished build.
Door handles, bezels, levers and small hardware for classic cars and vintage motorcycles, stripped, repaired and replated by hand. Send photos from Orlando and get a free written quote.
We take the time so your finish lasts
The inside of a classic deserves the same attention as the outside. Knobs, window cranks, switch plates, bezels and handles are the things you touch every time you drive, and when they are worn or pitted, the whole interior feels tired.
We restore interior trim and hardware in show chrome, nickel or the original finish your car came with. These parts are small, which makes them an easy first project, and the difference in a finished cabin is easy to see.
If you are working on a car in Orlando, Winter Park or Kissimmee, gather the small pieces, bag and label them by where they go and send us photos. Owners in Orlando ship their parts to us, and we ship them back insured. Sets come back together so they match.
Small parts are our sweet spot, and they are easy and affordable to ship from anywhere in the country. Send a few photos, tell us what the parts came from and how you want them to look, and we will send back a written quote.
Need one handle done or a whole tray of hardware? Either way, the services below cover how we repair, level and plate small parts so they look right on your classic.
Triple plated in copper, nickel and chrome and buffed by hand between layers, for the deep, wet shine that makes small trim stand out on a finished build.
Pitted and blistered pot metal is stripped, filled and leveled in copper before it is plated. Slow, careful work that saves parts most shops send back.
Bright or satin nickel for earlier cars and motorcycles that left the factory with a softer, warmer shine than modern chrome.
Knobs, handles, window cranks, bezels and switch plates restored so the inside of your classic matches the outside.
Levers, clamps, mirror stems, small covers and controls replated so a vintage bike looks right from every angle.
Original bolts, nuts, clips and small brackets cleaned and replated, so you keep correct factory hardware instead of buying generic replacements.
Drag the handle on any photo to see the part as it arrived and as it left our shop.
Before
Bubbled, flaking chrome over pitted pot metal. Stripped, filled in copper, leveled by hand and triple plated in show chrome.
Before
A thin steel ring with surface rust and worn plating. Stripped, polished and finished in bright nickel and chrome.
Before
A coffee can full of rusty original bolts, clips and small brackets. Cleaned, sorted and replated as a matching set, ready to go back on.
You don't have to live nearby to work with us.
Customers all over the country pack their parts and ship them to our Oceanside shop. We finish them, inspect them and send them back insured. It starts with a few photos.
Owners, shops and collectors trust us with parts that are hard or impossible to replace.
Not every part needs the same treatment. Picking the right level for each piece keeps your budget where it matters most.
Classic parts were made from a handful of metals, and each one needs its own preparation before it can shine again.
Used for door handles, hood ornaments, interior knobs and many trim pieces. We stop the pitting, fill it in copper and level it by hand before plating.
Brackets, bezels, levers and hardware. Rust is removed down to clean metal, then the part is polished and plated in copper, nickel and chrome.
Common on early vehicles, lamps and fittings. Brass takes nickel and chrome beautifully once it has been cleaned and polished.
Some trim pieces and motorcycle covers are aluminum. They need a special pretreatment before plating, so we review each piece before quoting.
Many classic trim pieces are stainless and may only need polishing. If yours does need plating, it gets a nickel strike first so the finish bonds.
Older fittings and hardware in copper or bronze clean up well and plate easily, whether you want them chromed or nickeled.
Getting a part restored is easier than most owners expect. Here are the five steps, from your first photo to the day your parts go home.
Photograph each part from a few angles and tell us what it came from and the finish you want.
We check the condition and the metal, then send a written quote and lead time within 24 business hours.
Send your parts by carrier once your quote is approved. Include your contact details, quote number and a list of every finish, then email us the tracking number.
Old plating and rust come off, pits are filled, and the surface is leveled and polished by hand.
Copper, nickel and chrome go on in layers, then every part is inspected, packed and returned insured.
What Size Parts Make Sense to Ship
Most of the classic and vintage work that comes through our door fits in a small box. Handles, knobs, bezels, levers, brackets, hardware and short trim pieces are light, they pack easily and the shipping cost both ways stays reasonable. For owners outside California, these are the parts where mailing them to a specialty shop makes the most sense.
Larger pieces like bumpers, grilles and full length trim are a different story. We can plate them, but they need oversized boxes or freight, and the trip here and back can add up quickly. If you live in Southern California, the easiest option is simply to bring them to the shop.
If you are farther away and still want us to handle a large part, we are happy to take a look. Send photos and measurements, we will quote the plating, and you can weigh that against the shipping before you decide. No pressure either way.
A quick list of the classic and vintage parts and finishes we handle most often.
We have been restoring plated parts since 1989. Car owners, motorcycle restorers and private collectors send us the pieces they cannot replace, because we take the time to save them.
Send photos of your parts and get a no obligation quote within 24 hours.
Every restored part is backed by our craftsmanship guarantee. If something is not right, we make it right.
Small parts travel easily from any state and come back to you insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
On a classic, people look closely. Every shortcut in stripping or prep shows up later as peeling, pits or haze, so we do the slow work first.
Old chrome and nickel are fully removed, so the new layers bond to clean metal instead of a finish that is already failing.
Copper is built up and leveled by hand until pits disappear, which is what separates a show finish from a quick rechrome.
Every part is checked for haze, pits and missed spots before it is approved to leave the shop.
Each restored part is wrapped on its own, so fresh chrome never rubs against another piece on the way home.
Classic car owners, motorcycle builders and hot rod shops make up much of our work, along with collectors of vintage hardware and automobilia.
Antique slot machine trim, handles and casino collectibles restored to their original shine. Casino resorts across North County San Diego trust us with their decorative metal work.
Private owners and restoration shops rebuilding American and European classics, one small part at a time.
Riders and builders bringing old bikes back to original condition, or giving a custom build a clean, bright finish.
Shops that need dependable show chrome on small parts, with clear quotes and consistent quality job after job.
Owners getting ready for shows and judging who need finishes that hold up under a very close look.
Collectors of automobilia and vintage hardware who want a treasured piece to look the way it did when it was new.
Help your restoration stay beautiful
Orlando is warm and humid almost all year, and that constant moisture makes drying and sealing parts a habit worth building. Rinse off dirt before you wipe, then dry with microfiber, so you never drag grit across a freshly plated surface.
Wax adds protection, but only on a clean dry surface, so wash and dry the part first and then apply it. Take your time with the first reinstall. A relaxed afternoon and a clean workspace protect your restoration better than any product.
Skip steel wool, rubbing compound and harsh wheel cleaners. They scratch the surface and can cut through the chrome to the nickel underneath. If a spot needs more than soap, use a polish made for chrome and a soft cloth. Nickel is softer than chrome, so treat nickel parts gently and always dry them well.
For storage, keep parts and vehicles somewhere dry under a breathable cover, never plastic that traps moisture. If you notice small rust spots or lifting plating, send us a photo. Catching a problem early is always easier than waiting.
Restored Parts Gallery
Door handles, bezels, cranks, levers and original hardware from classic cars and vintage motorcycles, restored in our Oceanside shop.
From the first email to the box at your door, here is how sending classic parts to us works for owners in Orlando.
Send photos of every part and the finish you want. You will get a written quote and lead time, usually the same business day. Please wait for your quote number before you ship.
Wrap each part on its own so metal never touches metal, and use a box just large enough for the parts and padding. A snug box keeps parts safe and keeps the shipping cost down.
Bag and label small hardware by where it goes so sets come back together easily. Declare the real value with the carrier and email us the tracking number.
When your parts are finished we send photos for your approval, then pack them in fresh materials and ship them back insured.
Local car and motorcycle owners are welcome to drop off parts at our shop in North County San Diego. It is also the easiest option for larger pieces.
Chrome, nickel and copper restoration for classic and vintage parts since 1989.
You do not need to visit. Mail your parts from Orlando to 2613 Temple Heights Dr, Ste G, Oceanside, CA 92056, and we send them home insured after you approve the finished work.
Explore our classic parts restoration pages for other cities close to Orlando.
Frequently Asked Questions
Questions are welcome at every step. Here are some answers to get you started.
Nickel was common on earlier vehicles, and it has a softer, warmer shine than modern chrome. If your car or bike left the factory with nickel, nickel plating keeps the restoration looking right. Tell us the year and model and we will help you choose.
You are welcome to if you are ever in Southern California. Our shop is in Oceanside, open Monday to Friday 8 AM to 5 PM and Saturday 9 AM to 2 PM. Otherwise, shipping works well for small parts.
Yes. Motorcycle levers, clamps, mirror stems and covers go through the same process as car trim: stripping, repair, copper, nickel and chrome, then inspection. Because motorcycle parts are usually small, they are also easy and affordable to ship.
Tell us the date when you ask for a quote. Standard turnaround is 3 to 5 weeks, and expedited work of 5 to 7 business days may be possible when our schedule allows. Remember to add shipping time and allow extra for heavily pitted pot metal.
It means the part gets three layers: copper, nickel and chrome. The copper smooths and levels the surface, nickel adds depth and protection, and the chrome gives the bright finish. We buff by hand between layers for a deep, wet shine.
Not at all. Most of what comes through our door is home and business hardware: faucets, light fixtures, door handles, cabinet pulls, railings and decorative pieces. We also work for hotels, restaurants, boat owners and manufacturers.
Tell us what the part is, roughly how big it is, how many pieces you have and the finish you're after. If you know the metal, mention it. If not, that's fine. We can usually tell from the photos.
Every part is quoted on its own. The biggest factors are condition, the base metal, size and shape, the finish you choose and how many pieces you send. A part with deep pits or broken spots takes more work before it can be plated.