Railings and Gates
Wrought iron and steel railings, gate panels and balusters stripped of rust and flaking paint, then powder coated or plated to stand up to weather again.
We take pieces apart, remove old coatings and rust, repair what needs it and apply a fresh finish. If you are in Vista, the first step is a handful of photos and a rough size.
From first photo to final inspection, all under one roof
Plenty of shops will spray paint over rust and call it done. It looks fine for a few weeks, then bubbles through. We do not work that way at Decorative Metal Coatings, and that matters if you are weighing your options in Vista.
Rust and old coatings come off completely, parts are photographed before we take anything apart and we call you before any repair that changes the price. That has been our routine in Oceanside, California for over 35 years.
It is the same for pieces from Oceanside, San Marcos and Carlsbad. A proper job takes a little longer, and it shows in how well the finish lasts.
Start with a few photos. Tell us what the piece is, where it lives and how you want it to look, and we will explain what it needs, what it will cost and how long it will take before anything leaves your hands.
Here is a quick tour of what lands on our bench, with the finish we usually suggest for each.
Wrought iron and steel railings, gate panels and balusters stripped of rust and flaking paint, then powder coated or plated to stand up to weather again.
Chandeliers, sconces, lamp bases and stands taken apart, cleaned, refinished arm by arm and returned ready for your electrician to rewire.
Outdoor sculptures, fountains and birdbaths cleaned of corrosion and mineral stains, repatinated or sealed so they age gracefully instead of falling apart.
Cabinet pulls, drawer handles and decorative knobs restored with a durable finish that brings back their original beauty, with options ranging from classic designs to modern styles.
Antique hardware, candlesticks, clocks and keepsakes handled with care, cleaned and refinished while engraving, stamps and fine detail are preserved.
Dedication plaques, address numbers, metal signs and wall art brought back to crisp, readable condition with lettering and relief kept sharp.
From the first email to the final inspection, here is what to expect when you refurbish with us.
Show us the whole piece and any close ups of rust, breaks or missing parts, plus rough dimensions.
We identify the metal and its condition, suggest the best finish and send a written quote within 24 business hours.
Drop it off in Oceanside or send it by carrier. If it is a big piece, tell us and we will plan the delivery with you.
Old coatings and rust come off, bends are straightened, pits are filled and the surface is polished or blasted.
The new finish is applied, every detail is checked and the piece is packed and returned insured.
The right finish depends on where the piece lives and how it is used. We help you choose before any work begins.
Drag the handle on any photo to see the piece as it came in and as it went home.
Before
Blackened brass with flaking lacquer on every arm. Taken apart, stripped, polished and refinished in bright brass, then sealed so the shine lasts.
Before
Years of rust, chipped paint and weather exposure. Stripped down to bare metal, restored and finished with a durable matte black coating built for long-lasting performance.
Before
Green corrosion hid most of the lettering. Cleaned, given a new dark patina, raised letters polished bright and sealed against the weather.
You don't have to live nearby to work with us.
Customers all over the country pack their parts and ship them to our Oceanside shop. We finish them, inspect them and send them back insured. It starts with a few photos.
Each metal ages in its own way, so each one needs its own cleaning, repair and finish.
Rust is removed down to clean metal and any weak spots are checked before a protective finish goes on. Powder coat or plating both work well.
Tarnish and old lacquer are stripped so the metal can be polished, replated or given a new patina, depending on the look you want.
Light and corrosion resistant, but chalky and pitted with age. Cleaned and refinished in powder coat or plated after the right pretreatment.
Copper pieces can be polished bright and sealed, or cleaned and darkened to an even antique tone that hides fingerprints.
Common in old lamps and fixtures. Fragile and porous, so we strip it gently and fill pits by hand. Slow work that many shops turn down.
Pieces with glass, wood, stone or old paint attached are reviewed case by case. Send photos and we will explain what can be removed safely.
The pieces, finishes and repair work that make up a typical refurbishing job in our shop.
Since 1989 we have been rescuing metal pieces that other people gave up on. Homeowners, designers, collectors and businesses trust us because every finish we offer is done in house, so the advice we give is about your piece, not our shortcuts.
Send a photo of your part and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One heirloom or a full set of furniture, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Homeowners, designers, hotels and collectors all bring us metal. Here is who we work with and how we help.
Brass rails, slot trim, light fixtures, signage and decorative metal refreshed between renovations, often in large matched sets. Trusted by casino resorts across North County San Diego.
Bar stools, patio sets, railings and lobby fixtures restored for a fraction of the cost of replacing a whole room.
Family heirlooms, entry gates, light fixtures and garden pieces brought back so they can stay in the home.
Entry gates, pool fencing panels, mailboxes and address signs refinished to keep a community looking cared for.
Salvaged and vintage metal reworked in a new finish to fit a modern design, matched across every room of a project.
Careful cleaning and refinishing that respects age and value, with the option to keep original patina where it matters.
Every piece that comes through our door has a story. Our job is to give it a better next chapter, not to erase what made it worth saving.
If a piece is not worth refurbishing, or needs work outside what we do, we tell you before you spend a dollar.
Engraving, castings, stamps and maker marks are protected during stripping and polishing so the character of the piece survives.
Outdoor pieces get finishes built for sun and salt air, indoor pieces get finishes chosen for looks and easy care.
Every refurbished piece is wrapped, padded and boxed with care, and large items are crated when needed.
Questions to ask before you decide
Start with the build. Heavy cast iron, solid brass and thick steel can last for decades after a new finish, and that kind of construction is hard to find in new products. If your piece feels heavy in the hand, it is usually a good sign.
Next, look at what is wrong. Rust, tarnish, chipped paint and worn plating are all surface problems, and we can remove every one of them. Cracks and missing sections are a different story, and we will tell you when they matter.
Then think about what the piece means and what it would cost to replace with the same quality. Vintage lighting, cast garden pieces, ornamental iron and antique hardware are rarely made the same way anymore. Refurbishing often costs less than a new item of equal build, and the result is one of a kind.
Finally, consider where it will live. A piece moving from indoors to a patio may need a different finish than it had before. Tell us its new home and we will choose a finish that will hold up there.
Metal Finishing Gallery
A look at recent work from our Oceanside shop: plated hardware, lighting, hospitality and casino pieces, marine fittings and industrial parts.
If you are in Vista, you can bring a piece to Oceanside or ship it. Either way, the quote comes first.
Send photos of each piece with rough dimensions and the finish you have in mind. You receive a written quote and lead time, usually the same business day. Always wait for a quote number before shipping.
Wrap small pieces individually with at least three inches of padding. Remove glass shades and crystals from fixtures and pack them separately. Gates, railings and furniture should be crated or palletized.
Declare the real value with the carrier and email us the tracking number so we can log your pieces the day they arrive.
When the work is done we photograph the finished pieces for your approval, then pack them in fresh materials and ship them back insured.
Every refurbishing job is stripped, repaired, refinished and inspected in our own facility in North County San Diego.
Metal refurbishing, plating, powder coating and patinas in San Diego County since 1989.
Vista is part of North County San Diego, where long dry summers and strong sun fade painted metal on gates, fences and patio sets. Many homes here also have garden pieces and outdoor lights that stay out all year. We usually suggest powder coat for those, and indoor fixtures can be plated, polished or given a patina.
If you are in Oceanside, San Marcos or Carlsbad, the steps are the same as for Vista. You will find a few of the closest cities with their own pages here.
Frequently Asked Questions
Most questions come down to cost, timing and finish. We cover those and a few others below.
Yes. Our shop is at 2613 Temple Heights Dr, Ste G in Oceanside, and we are open Monday to Friday from 8 AM to 5 PM and Saturday from 9 AM to 2 PM. It helps to send photos first so we can have a quote ready when you arrive.
Yes. Call us at (760) 746 3378 or send photos first. We can quote most pieces from pictures, which saves a trip, and we will tell you when it is worth stopping by.
Yes. We take fixtures apart, clean and refinish them arm by arm and return them ready for your electrician to rewire. Glass shades and crystals should be removed and packed separately before they reach us.
For outdoor railings we usually recommend powder coat, since it is thick and resists chips and weather. Plating suits indoor pieces and decorative hardware. The right choice depends on where the railing sits, so tell us and we will advise you.
We are open Monday to Friday from 8 AM to 5 PM and Saturday from 9 AM to 2 PM, and closed on Sunday. Receiving hours are Monday to Friday from 8 AM to 4 PM. Call (760) 746 3378 if you are unsure.
It depends on the part. Older fixtures and hardware are often better made than what you can buy today, or simply can't be found anymore. Send us photos and we'll give you an honest answer, even if that answer is to buy a new one.
Yes. We work with hotels, casinos, restaurants, architects, contractors and manufacturers, as well as homeowners. For businesses we can plate a whole project to one finish so every piece matches.
Yes. Our shop is at 2613 Temple Heights Dr, Suite G, in Oceanside. Bring your quote number and your parts during business hours, Monday to Friday 8 AM to 5 PM or Saturday 9 AM to 2 PM.