Mirror Polishing
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
Tell us what the piece is, what is wrong with it and the look you want. We will check the metal, send a written quote and handle the work in Oceanside.
Do not replace it yet, polishing may be enough
Plenty of people think a worn piece needs replacing when it only needs polishing. Solid brass hardware, old lamps and stainless rails can often be brought back instead of replaced, and they keep the weight and character you liked in the first place.
We will tell you honestly which way to go. If the metal underneath is sound, polishing is usually the answer. If it is rusted through or badly pitted, we will say so instead of taking your money.
That honest look is open to anyone in Stanton, Garden Grove or Anaheim who sends photos. It costs nothing, and you end up with a written quote and a clear idea of what your piece can become.
Send us a few photos and tell us how the piece is used. We will tell you whether polishing alone will get you there or whether it needs plating, explain what finish makes sense and send back a written quote.
Some pieces need a bright shine, others need a soft grain, and some just need scratches gone. Here is how we handle each one.
Our brightest finish. The surface is cut, buffed and colored until it reflects like glass, perfect for lighting, display pieces and decorative hardware.
A fine, even grain that softens glare and hides fingerprints. A smart choice for handrails, pulls and levers that get touched all day long.
Deep scratches, light pitting and tool marks are worked out wheel by wheel, so the finished surface is smooth and even instead of wavy.
Tarnish and old lacquer come off, the metal is brought back to its warm color and sealed with a clear coat if you want it to stay that way.
Each metal needs its own compounds. We polish stainless to a crisp shine and aluminum to a bright finish without burning or smearing the surface.
Plating copies the surface under it. We polish parts flat and clean before nickel, chrome or gold so the final finish comes out flawless.
Drag the handle on any photo to see how the piece arrived and how it looked when it left our polishing room.
Before
Dark tarnish, fingerprint stains and old lacquer flaking at the edges. Stripped, polished to a mirror and sealed with a fresh clear coat.
Before
Years of scuffs from shoes and stools. Scratches were cut out and the rail was brought back to a bright, uniform shine along its full length.
Before
Chalky gray oxidation over every surface. Hand polished into the curves and details until the aluminum showed a clean, bright finish again.
Not sure what your part needs? Send us a photo.
We'll tell you what the metal is, what it takes to bring it back and what it costs. A written quote usually comes back within 24 business hours, and there's no obligation.
More shine is not always better. The right level depends on how the piece is used, how often it is touched and the look you want.
Each metal has its own hardness, color and quirks. Knowing them is what keeps a polish from turning out wavy, burned or hazy.
Polish up beautifully and take a deep mirror. Old lacquer is stripped first, then the metal is buffed and resealed so the warm color holds.
Soft and quick to scratch, so it is buffed gently with fine compounds. Finished bright for a classic look or left to age naturally.
Hard and tough to cut, but it holds a polish for years. Ideal for rails, kitchen and bar equipment and marine fittings near the coast.
Turns dull and chalky outdoors. We polish it bright and can seal it to slow the oxidation that brings the haze back.
Polishes well but rusts if left bare, so it usually gets plated or coated after polishing. We will explain the options before we start.
Soft castings with a thin skin. Pushing too hard opens pits, so we polish these by hand with light pressure and know when to stop.
You send photos, we send a quote, and then the real work begins. Here is the full picture.
Show us the piece, the damage and the look you want: mirror, bright or satin.
We check the metal and the condition, then send a written quote within 24 business hours.
Once you say yes, get it to Oceanside by carrier or by car. Wrap every piece on its own and keep the quote number handy.
Old lacquer and tarnish come off, then scratches are worked out from coarse to fine wheels.
A final color buff, a full cleaning, an optional clear coat and a close look under bright light.
Sometimes Polishing Is All It Takes
Many customers call asking for plating when their piece only needs a good polish. If the part is solid brass, copper, stainless or aluminum and the damage is on the surface, polishing alone brings it back for less money and keeps the original metal you already like.
Plating is the answer when the color needs to change, when the metal underneath is steel that will rust, or when the old plating has already worn through to a different color. In those cases we still polish first, because a plated finish only looks as good as the surface under it.
Not sure which group your piece falls in? Look at a worn corner or the back side. If the color is the same all the way through, it is probably solid and a polish will do. If you see a different color peeking through, it is plated, and we will talk you through replating.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Every polished finish and restoration service we handle in house.
Polishing wheels have been turning in our shop since 1989. It is the skill every other finish we offer depends on, and the reason homeowners, designers and casino resorts keep sending us their metal.
Send a photo of your piece and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One heirloom or a full hotel renovation, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Homeowners, designers, restaurants and resorts all need metal polished. These are the kinds of work we take on, and the same service is open to anyone in Stanton.
Slot machine trim, table rails, bar fixtures and decorative accents polished to shine under bright lights day and night. Casino resorts across North County San Diego trust us with their gaming floors.
Bar rails, foot rests, door push plates and lobby fixtures brought back to a bright, welcoming finish.
Door levers, hinges, knobs and railings polished as a matched set so every room looks consistent.
Chandeliers, sconces, lamp bases and decorative pieces polished by hand, curves and details included.
Stainless cleats, rail fittings and bronze hardware cleaned of salt haze and polished to stand up to coastal air.
Family pieces, candlesticks and collectibles polished carefully so engraving, stamps and fine detail stay sharp.
Fast polishing leaves swirls, waves and rounded edges. We take the time each piece needs so the finish looks right from every angle.
Brass, stainless and aluminum each get their own wheels and compounds, so the surface is never burned, smeared or left hazy.
Every grit is fully removed by the next one before we move on. That is how a polish ends up clear instead of swirly.
Finished pieces are cleaned of all compound and inspected under strong light from several angles before they are approved.
A fresh mirror scratches easily, so each piece is wrapped in soft material and boxed to arrive just as it looked in our shop.
A polish that holds up longer
The sun is strong in Stanton, and it can break down a clear coat on pieces that sit outdoors or in a bright window. If your hardware gets direct light all day, mention it when we quote so we can plan the finish around it.
Store loose pieces wrapped in soft cloth rather than stacked together. Polished metal scratches when it rubs against other metal, and a fresh mirror shows every mark.
Unsealed pieces can be kept bright with a gentle metal polish and a clean microfiber cloth. Rub lightly in the direction of the grain on satin finishes, and use a fresh area of the cloth as it picks up black residue. Abrasive pads and kitchen scrubbers will scratch a mirror finish in seconds.
Near the ocean, salt air speeds everything up. Rinse outdoor hardware with fresh water now and then and dry it. When a piece finally loses its shine, send it back. A repolish is usually quick because the hard cutting work was already done the first time.
Metal Finishing Gallery
A look at recent work from our Oceanside shop: plated hardware, lighting, hospitality and casino pieces, marine fittings and industrial parts.
Getting your metal from Stanton to our shop takes a few simple steps. Follow them and your pieces arrive in the same shape they left.
Email photos of each piece, front and back, and the finish you want. You receive a written quote and lead time, usually the same business day. Wait for your quote number before you ship.
Wrap every piece on its own in soft cloth or bubble wrap so nothing rubs together in transit. Pad the box with at least three inches on every side and double box long rails or tubes.
Declare the full value with the carrier and email us the tracking number so we know what is coming and can log it the day it lands.
Once polishing is done we send photos for your approval, then pack your pieces in new materials and return them insured.
Every piece is polished, cleaned and inspected by hand in our own shop in North County San Diego.
Metal polishing, plating and finishing in San Diego County since 1989.
Stanton is a small city in Orange County near Garden Grove and Anaheim. It is a drive down to Oceanside for drop off, and shipping works well for anything delicate you would rather not carry.
If your piece is in a town near Stanton, one of these pages may fit better. The service is the same.
Frequently Asked Questions
Most questions have simple answers. Here are the ones we get asked again and again.
Yes. Flaking or yellowed lacquer leaves blotches if you polish over it, so it comes off first. After polishing we can apply a fresh clear coat if you want the shine to last.
Less than in coastal places, since the air is drier. Sun and dust are the usual issues, so a clear coat and a soft cloth keep things looking good.
Look at a worn corner or the back. If the color is the same all the way through, it is probably solid. If a different color shows through, it is plated. Photos help, and we check before we start.
It can if it is done too hard, because plating is very thin. That is why we check what a piece is made of first and talk with you about replating if the plating has already worn through.
If the piece is solid and the damage is on the surface, polishing alone usually does it. Plating is for when the color needs to change or the base metal is steel that will rust. Photos help us decide.
Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.
Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.
Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.