Railings and Gates
Wrought iron and steel railings, gate panels and balusters stripped of rust and flaking paint, then powder coated or plated to stand up to weather again.
Whether it is a tarnished brass fixture or a flaking iron railing, we have refinished plenty like it since 1989. Send photos from Solana Beach and you will have a quote within 24 business hours.
Bring it in or ship it, the quote comes first
Decorative Metal Coatings has been bringing tired metal back to life since 1989, whether the piece is in Solana Beach or across the country. We work out of our own shop in Oceanside, California, and the same crew handles a railing like yours as carefully as a chandelier or a garden sculpture.
What makes that work is that every finish we offer is done under our own roof. Plating, powder coating, patinas and hand polishing all happen in one building, so when we tell you which finish suits your piece, we are not steering you toward the only thing we can do.
Most of what lands on our bench is not broken. It is rusted, tarnished, dull or flaking, and that can usually be fixed. If you are in Del Mar, Encinitas or Cardiff, send photos first, and we will explain what is going on and give you a written price before any work begins.
Start with a few photos. Tell us what the piece is, where it lives and how you want it to look, and we will explain what it needs, what it will cost and how long it will take before anything leaves your hands.
Some pieces need plating, some need powder coat and some need a careful polish. Here is how we approach six common ones.
Wrought iron and steel railings, gate panels and balusters stripped of rust and flaking paint, then powder coated or plated to stand up to weather again.
Chandeliers, sconces, lamp bases and stands taken apart, cleaned, refinished arm by arm and returned ready for your electrician to rewire.
Outdoor sculptures, fountains and birdbaths cleaned of corrosion and mineral stains, repatinated or sealed so they age gracefully instead of falling apart.
Cabinet pulls, drawer handles and decorative knobs restored with a durable finish that brings back their original beauty, with options ranging from classic designs to modern styles.
Antique hardware, candlesticks, clocks and keepsakes handled with care, cleaned and refinished while engraving, stamps and fine detail are preserved.
Dedication plaques, address numbers, metal signs and wall art brought back to crisp, readable condition with lettering and relief kept sharp.
Here is what happens after you send photos, step by step, so you know what is coming.
Show us the whole piece and any close ups of rust, breaks or missing parts, plus rough dimensions.
We identify the metal and its condition, suggest the best finish and send a written quote within 24 business hours.
Walk it into our Oceanside shop during receiving hours, or have a carrier pick it up in Solana Beach. Heavy items should be booked ahead of time.
Old coatings and rust come off, bends are straightened, pits are filled and the surface is polished or blasted.
The new finish is applied, every detail is checked and the piece is packed and returned insured.
The right finish depends on where the piece lives and how it is used. We help you choose before any work begins.
Drag the handle on any photo to see the piece as it came in and as it went home.
Before
Blackened brass with flaking lacquer on every arm. Taken apart, stripped, polished and refinished in bright brass, then sealed so the shine lasts.
Before
Years of rust, chipped paint and weather exposure. Stripped down to bare metal, restored and finished with a durable matte black coating built for long-lasting performance.
Before
Green corrosion hid most of the lettering. Cleaned, given a new dark patina, raised letters polished bright and sealed against the weather.
Big order or a single knob, same care.
Homeowners send us one faucet. Companies in and out of state send production runs of hundreds or thousands of parts. Both get a written quote and the same inspection before anything ships back.
Each metal ages in its own way, so each one needs its own cleaning, repair and finish.
Rust is removed down to clean metal and any weak spots are checked before a protective finish goes on. Powder coat or plating both work well.
Tarnish and old lacquer are stripped so the metal can be polished, replated or given a new patina, depending on the look you want.
Light and corrosion resistant, but chalky and pitted with age. Cleaned and refinished in powder coat or plated after the right pretreatment.
Copper pieces can be polished bright and sealed, or cleaned and darkened to an even antique tone that hides fingerprints.
Common in old lamps and fixtures. Fragile and porous, so we strip it gently and fill pits by hand. Slow work that many shops turn down.
Pieces with glass, wood, stone or old paint attached are reviewed case by case. Send photos and we will explain what can be removed safely.
The pieces, finishes and repair work that make up a typical refurbishing job in our shop.
Since 1989 we have been rescuing metal pieces that other people gave up on. Homeowners, designers, collectors and businesses trust us because every finish we offer is done in house, so the advice we give is about your piece, not our shortcuts.
Send a photo of your part and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One heirloom or a full set of furniture, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Each of these groups has its own reasons for refurbishing, and we plan around them.
Brass rails, slot trim, light fixtures, signage and decorative metal refreshed between renovations, often in large matched sets. Trusted by casino resorts across North County San Diego.
Bar stools, patio sets, railings and lobby fixtures restored for a fraction of the cost of replacing a whole room.
Family heirlooms, entry gates, light fixtures and garden pieces brought back so they can stay in the home.
Entry gates, pool fencing panels, mailboxes and address signs refinished to keep a community looking cared for.
Salvaged and vintage metal reworked in a new finish to fit a modern design, matched across every room of a project.
Careful cleaning and refinishing that respects age and value, with the option to keep original patina where it matters.
Every piece that comes through our door has a story. Our job is to give it a better next chapter, not to erase what made it worth saving.
If a piece is not worth refurbishing, or needs work outside what we do, we tell you before you spend a dollar.
Engraving, castings, stamps and maker marks are protected during stripping and polishing so the character of the piece survives.
Outdoor pieces get finishes built for sun and salt air, indoor pieces get finishes chosen for looks and easy care.
Every refurbished piece is wrapped, padded and boxed with care, and large items are crated when needed.
Make the choice with confidence
Think about where the piece sits today. Fixtures and furniture that live outdoors take the most abuse, and a bad finish there is usually the first thing to give out, not the metal underneath.
If the structure is sound, a fresh finish brings it back. Stripping to bare metal, repairing and refinishing deals with the real cause, instead of covering it up again for a few seasons.
Then think about what the piece means and what it would cost to replace with the same quality. Vintage lighting, cast garden pieces, ornamental iron and antique hardware are rarely made the same way anymore. Refurbishing often costs less than a new item of equal build, and the result is one of a kind.
Finally, consider where it will live. A piece moving from indoors to a patio may need a different finish than it had before. Tell us its new home and we will choose a finish that will hold up there.
Metal Finishing Gallery
A look at recent work from our Oceanside shop: plated hardware, lighting, hospitality and casino pieces, marine fittings and industrial parts.
Whether you bring it to Oceanside or ship it, a few simple steps protect a piece from Solana Beach.
Send photos of each piece with rough dimensions and the finish you have in mind. You receive a written quote and lead time, usually the same business day. Always wait for a quote number before shipping.
Wrap small pieces individually with at least three inches of padding. Remove glass shades and crystals from fixtures and pack them separately. Gates, railings and furniture should be crated or palletized.
Declare the real value with the carrier and email us the tracking number so we can log your pieces the day they arrive.
When the work is done we photograph the finished pieces for your approval, then pack them in fresh materials and ship them back insured.
Every refurbishing job is stripped, repaired, refinished and inspected in our own facility in North County San Diego.
Metal refurbishing, plating, powder coating and patinas in San Diego County since 1989.
Solana Beach sits right on the coast, and salty air reaches railings, lanterns, patio furniture and door hardware all year. Salt speeds up rust and spots on bare steel and thin plating. For outdoor pieces we often use powder coat or a sealed finish, and our shop in Oceanside is not far up the coast if you want to bring a piece in.
Solana Beach has neighbors like Del Mar, Encinitas and Cardiff, and each of them follows the same simple process with us. A few more places we serve are listed below.
Frequently Asked Questions
A few questions come up again and again. Here are the answers, in plain words.
For outdoor pieces, powder coat is usually the strongest choice, since it forms a thick barrier over the metal. Brass and bronze can be sealed with a clear coat. Indoor pieces have an easier time and can be plated or polished. Tell us where the piece lives and we will recommend a finish.
Yes. Door pulls, knobs and hinges are stripped, repaired and refinished in plating, powder coat or patina. For several matching pieces, send them together so the finish is consistent.
For small pieces you can bring them during receiving hours, though calling first is a good idea. Large items and freight should be scheduled so we are ready for them.
Yes. When the work is done we let you know, and you can pick it up at our Oceanside shop during business hours. If you would rather not travel, we can pack it and ship it back insured.
We call you before any repair that changes the quote. You decide whether to go ahead, and nothing extra is done without your approval.
Not at all. Most of what comes through our door is home and business hardware: faucets, light fixtures, door handles, cabinet pulls, railings and decorative pieces. We also work for hotels, restaurants, boat owners and manufacturers.
Tell us what the part is, roughly how big it is, how many pieces you have and the finish you're after. If you know the metal, mention it. If not, that's fine. We can usually tell from the photos.
Every part is quoted on its own. The biggest factors are condition, the base metal, size and shape, the finish you choose and how many pieces you send. A part with deep pits or broken spots takes more work before it can be plated.