Skip to content

Santa Clarita Classic Car and Motorcycle Parts Restoration

One handle or a whole tray of hardware? We take it from here

We work on the parts other shops send back. Pitted, blistered or flaking, send us a photo and we will tell you honestly if it can be restored.

Certified, Approved and Verified

Classic Car Parts Plating Company in Santa Clarita

Slow work, good results

Replacement hardware is easy to buy and hard to love. If you are restoring something in Santa Clarita, there is a good chance you would rather keep the bolts, clips and brackets that came on the car or bike. We replate those originals so they match the rest of the work.

Sets stay together at our shop. We clean, sort and replate them as a matching group, whether it is a coffee can of bolts or a few brackets, and we have been doing this kind of restoration in Oceanside since 1989.

From Castaic to Stevenson Ranch and out toward Agua Dulce, the process is the same: send photos of what you have and the finish you want, and we send back a written quote.

Small parts are our sweet spot, and they are easy and affordable to ship from anywhere in the country. Send a few photos, tell us what the parts came from and how you want them to look, and we will send back a written quote.

What We Do

Restoration Services

We keep the list short on purpose. These six services cover the small parts that make a classic car or motorcycle look finished.

Small hand sized part with fresh show chrome resting on a shop cloth

Show Chrome Restoration

Triple plated in copper, nickel and chrome and buffed by hand between layers, for the deep, wet shine that makes small trim stand out on a finished build.

Pot metal part being leveled after copper filling

Pot Metal Repair

Pitted and blistered pot metal is stripped, filled and leveled in copper before it is plated. Slow, careful work that saves parts most shops send back.

Small part with a warm bright nickel finish in natural light

Nickel Restoration

Bright or satin nickel for earlier cars and motorcycles that left the factory with a softer, warmer shine than modern chrome.

Restored chrome knobs and small handles on a wooden bench

Interior Trim and Hardware

Knobs, handles, window cranks, bezels and switch plates restored so the inside of your classic matches the outside.

Small polished chrome pieces arranged on a workbench

Motorcycle Small Parts

Levers, clamps, mirror stems, small covers and controls replated so a vintage bike looks right from every angle.

Replated original bolts, nuts and clips sorted in a tray

Bolts, Brackets and Fasteners

Original bolts, nuts, clips and small brackets cleaned and replated, so you keep correct factory hardware instead of buying generic replacements.

Restoration Results

Before and After

Drag the handle on any photo to see the part as it arrived and as it left our shop.

Pot metal handle after show chrome restoration
Pot metal handle with bubbled chrome before restoration Before
After

Pot Metal Handle

Bubbled, flaking chrome over pitted pot metal. Stripped, filled in copper, leveled by hand and triple plated in show chrome.

SHOW CHROME POT METAL COPPER FILLED
Bezel ring after polishing and chrome plating
Rusty bezel ring with worn plating before restoration Before
After

Gauge Bezel Ring

A thin steel ring with surface rust and worn plating. Stripped, polished and finished in bright nickel and chrome.

SHOW CHROME STEEL POLISHED
Set of original hardware after nickel replating
Rusty original bolts and clips before replating Before
After

Original Hardware Set

A coffee can full of rusty original bolts, clips and small brackets. Cleaned, sorted and replated as a matching set, ready to go back on.

NICKEL STEEL SET MATCH
Free Quotes

Not sure what your part needs? Send us a photo.

We'll tell you what the metal is, what it takes to bring it back and what it costs. A written quote usually comes back within 24 business hours, and there's no obligation.

Tap to add photos (up to 5). JPG, PNG, WEBP or iPhone HEIC.
    What Our Clients Say

    Trusted by Restorers and Builders

    Owners, shops and collectors trust us with parts that are hard or impossible to replace.

    Choosing a Finish Level

    Three Ways to Restore a Part

    Not every part needs the same treatment. Picking the right level for each piece keeps your budget where it matters most.

    Concours

    Show Quality

    • Every pit filled and leveled
    • Copper, nickel and chrome layers
    • Hand buffed between stages
    • Flawless under close inspection
    • Best for highly visible trim
    Most popular

    Driver Quality

    • Clean, bright and durable
    • Major pits repaired
    • A few light marks may remain
    • Great value for weekend cars
    • Best for parts you use every day
    Period correct

    Original Look

    • Finish matched to the era
    • Nickel or satin where correct
    • Factory style appearance
    • Best for original builds
    • Ask us about your year and model
    What We Can Restore

    Metals We Restore

    Classic parts were made from a handful of metals, and each one needs its own preparation before it can shine again.

    Our specialty

    Pot Metal and Zinc Die Cast

    Used for door handles, hood ornaments, interior knobs and many trim pieces. We stop the pitting, fill it in copper and level it by hand before plating.

    All finishes

    Steel

    Brackets, bezels, levers and hardware. Rust is removed down to clean metal, then the part is polished and plated in copper, nickel and chrome.

    All finishes

    Brass

    Common on early vehicles, lamps and fittings. Brass takes nickel and chrome beautifully once it has been cleaned and polished.

    Ask us first

    Aluminum

    Some trim pieces and motorcycle covers are aluminum. They need a special pretreatment before plating, so we review each piece before quoting.

    Case by case

    Stainless Steel

    Many classic trim pieces are stainless and may only need polishing. If yours does need plating, it gets a nickel strike first so the finish bonds.

    All finishes

    Copper and Bronze

    Older fittings and hardware in copper or bronze clean up well and plate easily, whether you want them chromed or nickeled.

    How It Works

    How Parts Restoration Works

    No guesswork, no surprises. This is what happens from your first photo to the day your parts come home.

    1

    Send Photos

    Photograph each part from a few angles and tell us what it came from and the finish you want.

    2

    Get Your Quote

    We check the condition and the metal, then send a written quote and lead time within 24 business hours.

    3

    Drop Off or Ship

    Come by the shop with your parts or ship them to us. Either way, get your quote number before you do.

    4

    Strip and Repair

    Old plating and rust come off, pits are filled, and the surface is leveled and polished by hand.

    5

    Plate and Return

    Copper, nickel and chrome go on in layers, then every part is inspected, packed and returned insured.

    Shipping Your Parts

    What Size Parts Make Sense to Ship

    Most of the classic and vintage work that comes through our door fits in a small box. Handles, knobs, bezels, levers, brackets, hardware and short trim pieces are light, they pack easily and the shipping cost both ways stays reasonable. For owners outside California, these are the parts where mailing them to a specialty shop makes the most sense.

    Larger pieces like bumpers, grilles and full length trim are a different story. We can plate them, but they need oversized boxes or freight, and the trip here and back can add up quickly. If you live in Southern California, the easiest option is simply to bring them to the shop.

    If you are farther away and still want us to handle a large part, we are happy to take a look. Send photos and measurements, we will quote the plating, and you can weigh that against the shipping before you decide. No pressure either way.

    Restoration Catalog

    Parts and Finishes We Restore

    A quick list of the classic and vintage parts and finishes we handle most often.

    Classic Car Parts

    • Door and Trunk Handles
    • Window Cranks and Knobs
    • Dash Bezels and Gauge Rings
    • Horn Rings and Steering Hardware
    • Mirror Arms and Brackets
    • Small Exterior Trim
    • Hood Ornaments

    Vintage Motorcycle Parts

    • Clutch and Brake Levers
    • Handlebar Controls and Clamps
    • Mirror Stems
    • Small Engine Covers
    • Headlight Rims and Brackets
    • Footpeg Brackets
    • Original Hardware

    Finishes and Repairs

    • Show Chrome
    • Driver Quality Chrome
    • Bright Nickel
    • Satin Nickel
    • Copper Base and Leveling
    • Pot Metal Repair
    • Stripping and Replating
    • Sample Match
    Restored small parts laid out for inspection in the shop
    Plating line at Decorative Metal Coatings
    35+ Years of Expertise
    Take a Moment to Learn More

    About Decorative Metal Coatings

    We have been restoring plated parts since 1989. Car owners, motorcycle restorers and private collectors send us the pieces they cannot replace, because we take the time to save them.

    Free Estimates Available

    Send photos of your parts and get a no obligation quote within 24 hours.

    Quality Guaranteed

    Every restored part is backed by our craftsmanship guarantee. If something is not right, we make it right.

    Ship From Anywhere in the US

    Small parts travel easily from any state and come back to you insured.

    Fast Turnaround Times

    Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.

    Our Commitment

    Restoration Done the Right Way

    On a classic, people look closely. Every shortcut in stripping or prep shows up later as peeling, pits or haze, so we do the slow work first.

    Stripped to Bare Metal

    Old chrome and nickel are fully removed, so the new layers bond to clean metal instead of a finish that is already failing.

    Pits Filled by Hand

    Copper is built up and leveled by hand until pits disappear, which is what separates a show finish from a quick rechrome.

    Inspected Under Light

    Every part is checked for haze, pits and missed spots before it is approved to leave the shop.

    Packed Piece by Piece

    Each restored part is wrapped on its own, so fresh chrome never rubs against another piece on the way home.

    What We Do Differently

    • We tell you before we start if a part is too far gone
    • Your original parts are restored, never swapped
    • Pot metal gets all the time it needs
    • We send photos when a part needs a decision from you
    • Every piece is inspected before it is packed

    What You May Experience Elsewhere

    • New chrome plated over old, failing plating
    • Pits polished over instead of filled
    • Pot metal parts sent back as not platable
    • Haze and burn marks left on finished parts
    • Pieces mixed up or missing from a set
    Who We Serve

    Who Sends Us Their Parts

    Some bring one treasured handle and some bring a box of hardware. These are the people we restore parts for.

    Restored chrome trim and handle on a vintage slot machine

    Vintage Slot Machines and Casino Pieces

    Antique slot machine trim, handles and casino collectibles restored to their original shine. Casino resorts across North County San Diego trust us with their decorative metal work.

    Restored small parts organized in trays on a restoration bench

    Classic Car Restorers

    Private owners and restoration shops rebuilding American and European classics, one small part at a time.

    Freshly plated small pieces laid out on a builder's workbench

    Vintage Motorcycle Builders

    Riders and builders bringing old bikes back to original condition, or giving a custom build a clean, bright finish.

    Box of small chrome plated parts ready for pickup at a custom shop

    Hot Rod and Custom Shops

    Shops that need dependable show chrome on small parts, with clear quotes and consistent quality job after job.

    Polished chrome pieces being checked closely under daylight

    Car Clubs and Show Entrants

    Owners getting ready for shows and judging who need finishes that hold up under a very close look.

    Restored vintage hardware displayed on a collector's shelf

    Collectors and Hobbyists

    Collectors of automobilia and vintage hardware who want a treasured piece to look the way it did when it was new.

    Care and Storage

    How to keep chrome and nickel bright

    Good plating lasts for years when it is looked after. Start with mild soap, water and a soft cloth, and make drying part of every wash. Moisture left on the surface is the main thing that dulls a finish.

    Dry heat and dust are the main things in Santa Clarita, and both are easy to wipe off before they bake on. Plan on waxing or sealing every few months, and wipe the part down whenever you notice a film on it.

    Skip steel wool, rubbing compound and harsh wheel cleaners. They scratch the surface and can cut through the chrome to the nickel underneath. If a spot needs more than soap, use a polish made for chrome and a soft cloth. Nickel is softer than chrome, so treat nickel parts gently and always dry them well.

    For storage, keep parts and vehicles somewhere dry under a breathable cover, never plastic that traps moisture. If you notice small rust spots or lifting plating, send us a photo. Catching a problem early is always easier than waiting.

    Nationwide Service

    Send Your Classic Parts From Anywhere in the US

    A good box, a few minutes of packing and a quote number are all you need. Here is the full list.

    01

    Get a quote first

    Send photos of every part and the finish you want. You will get a written quote and lead time, usually the same business day. Please wait for your quote number before you ship.

    02

    Pack snug, not big

    Wrap each part on its own so metal never touches metal, and use a box just large enough for the parts and padding. A snug box keeps parts safe and keeps the shipping cost down.

    03

    Label and insure

    Bag and label small hardware by where it goes so sets come back together easily. Declare the real value with the carrier and email us the tracking number.

    04

    Approved, then shipped home

    When your parts are finished we send photos for your approval, then pack them in fresh materials and ship them back insured.

    Visit Us

    Our Location

    Local car and motorcycle owners are welcome to drop off parts at our shop in North County San Diego. It is also the easiest option for larger pieces.

    Decorative Metal Coatings

    Chrome, nickel and copper restoration for classic and vintage parts since 1989.

    Business Hours

    • Monday to Friday 8:00 AM to 5:00 PM
    • Saturday 9:00 AM to 2:00 PM
    • Sunday Closed

    Prefer to hand parts over in person?

    That is welcome here. Owners in Los Angeles County can bring parts to our Oceanside shop and talk through the work face to face. Please send photos for a quote before you come.

    Nearby Cities We Serve

    Close to Santa Clarita? These cities are served the same way, with free quotes from photos and insured returns.

    Questions About Your Parts

    Frequently Asked Questions

    Short, honest answers about how we work and what to expect, from the first photo to the return shipment.

    We can work from a sample. Send the part or a clear photo of it and tell us which piece has to match, and we will quote the job with that goal.

    Both work. Small parts are easy to ship, and if you are heading our way anyway you can hand them over in person. Large pieces like bumpers and grilles are best brought to the shop.

    It is the best move. Send photos, get your written quote and quote number, and then bring your parts during shop hours. If you have something large or unusual, call (760) 746 3378 first.

    Usually, yes. We strip the part, fill the pits in copper, level it by hand and then plate it. The exceptions are parts that are cracked or badly corroded, and we tell you that before any work starts.

    Sometimes. Expedited orders take 5 to 7 business days as availability allows. Call us at (760) 746 3378 before you send anything so we can check the schedule.

    Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.

    Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.

    Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.