Nickel offers a warm silver appearance between the softer tone of polished silver and the cooler look of chrome. Customers in Pomona can choose from several nickel finishes for suitable hardware, fixtures, trim and restoration parts.
Make finish selection part of the restoration plan
Electroplated nickel uses electric current to deposit a controlled nickel layer on a prepared metal surface. It is selected for its warm silver tone, decorative flexibility and useful resistance to corrosion and everyday wear compared with bare steel or brass. This approach is useful for suitable small restoration components when the original part is worth retaining.
Finish selection should consider the surrounding hardware, lighting, intended use and whether the part needs to match an existing set. A clear topcoat may be requested when a brighter appearance with less gradual haze is preferred. The finish decision can be guided by the appearance required for lighting components and lamp details.
Each part is checked for base material, condition and finish requirements. Matched sets are prepared and plated with consistency in mind, then inspected for coverage and appearance before careful packing. This review is especially important for plumbing accessories, where base-metal condition and surface detail affect the final result.
If you are unsure whether your part needs nickel, chrome or electroless nickel, send a few photos and tell us how it will be used. We will explain the difference, recommend a finish and quote it in writing.
Slide the handle across each photo to compare the part as it came in with the finished nickel.
Before
Ornate cast panels with worn, flaking nickel and green corrosion in the recesses. Stripped, hand polished to keep every scroll sharp and replated in polished nickel to match the original look.
Before
Handle collars and cabinet trim dulled by years of hands on the gaming floor. Polished out and plated in bright nickel so every piece in the bank of machines matches again.
Before
Forty pulls in three different worn finishes. Stripped, brushed with the same grain direction and plated in satin nickel so the whole kitchen reads as one matched set.
You don't have to live nearby to work with us.
Customers all over the country pack their parts and ship them to our Oceanside shop. We finish them, inspect them and send them back insured. It starts with a few photos.
Available work includes bright nickel, satin nickel, brushed nickel, black nickel, polished vintage nickel, nickel base layers for decorative chrome and nickel strike for stainless steel.
A brilliant, mirror reflective nickel that comes out of the tank already shining. The go to finish for fixtures, trim and display pieces that need sparkle without the cool tint of chrome.
Nickel over a brushed or lightly blasted surface for a quiet, even sheen. Popular on cabinet pulls, plumbing trim and door levers because it hides smudges and everyday scuffs.
A dark, smoky gray nickel with a soft metallic depth. Used for modern hardware, lighting and accent pieces, usually over a bright nickel base and protected with a clear topcoat.
Hand buffed nickel with no chrome on top, the way parts were finished in the early 1900s. The right choice when a restoration should look original rather than modern.
A thick, leveling layer of bright nickel under decorative chrome. It provides most of the corrosion protection and the deep shine people credit to the chrome itself.
A thin, highly active nickel layer that breaks through the oxide on stainless steel and similar alloys, so the plating that follows bonds tightly and does not lift.
Three finishes that are often confused. They share a base metal but differ in how they are applied, how they look and where they perform best.
Our process begins with photos, quantity and finish goals. We identify the likely base metal, review the condition and provide a written quote before parts are shipped or dropped off.
Send photos, the quantity and the nickel finish you have in mind, or ask us to suggest one.
We identify the base metal, note any repairs and reply with pricing within 24 business hours.
After the quote is approved, parts can be shipped to our Oceanside facility or dropped off locally. Include the quote number and identify any finish-matching requirements or delicate details.
Old plating is stripped, dents and pits are worked out and the surface is polished or brushed.
Parts are nickel plated, checked for color and coverage, packed carefully and sent back.
Nickel finishes are commonly specified for hospitality properties, casinos, restaurants, residential interiors, antique restoration, marine hardware and manufacturers with suitable metal components.
Slot handles, cabinet trim, chip rails and bar fixtures replated in bright or satin nickel to stay crisp under constant use. Casino resorts across North County San Diego trust us to keep their gaming floors looking new.
Door levers, room numbers, bar foot rails and service hardware matched across an entire property.
Faucet trim, shower fittings, towel bars and accessories refinished to match new polished or satin nickel fixtures.
Cash registers, soda fountain parts, scales, stove trim and clocks returned to their original nickel finish.
Brass cleats, hinges and interior fittings nickel plated to resist the salt air along the Southern California coast.
Production parts that need a clean, corrosion resistant nickel finish delivered on schedule, batch after batch.
Nickel can go on almost any metal, but the cleaning, activation and first layer change with every base material.
Nickel protects steel from rust far better than paint. Rusted parts are stripped and polished first, and pitted areas are filled with copper before nickel goes on.
The classic base for nickel. Most antique hardware and plumbing trim is brass underneath, and it plates cleanly once old finishes and tarnish are removed.
Common in slot machine trim, faucets and newer hardware. It gets a copper strike before nickel, and careful prep keeps the finish from blistering later.
Treated with a zincate dip so nickel can bond, then plated like any other metal. Used for lighter trim, housings and decorative castings.
Receives a nickel strike to break through its natural oxide film. After that, any of our decorative nickel finishes can be applied.
Solid copper takes nickel very well. Unusual alloys are reviewed one at a time, so send the alloy name or a photo before shipping.
Nickel has been part of our daily work since 1989. Collectors, interior designers, casino maintenance teams and manufacturers rely on us because we prepare every surface properly before it ever touches the nickel bath.
Send a photo of your part and receive a no obligation quote within 24 hours.
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
One antique latch or a pallet of hardware, shipped to us from any state and returned insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
A complete list of the nickel finishes and supporting services we handle in our own shop.
Restorers, homeowners and companies keep coming back because the finish is right the first time.
A nickel finish is only as good as the work done before plating. These are the standards every order is held to.
Old nickel, chrome and lacquer are fully stripped so the new nickel bonds to clean metal instead of a failing layer.
Nickel magnifies whatever is under it. Every surface is polished or brushed to its final texture before plating.
Hardware sets are plated and inspected together so tone and sheen stay consistent from the first piece to the last.
Finished parts are individually wrapped and boxed so the nickel arrives free of scratches and fingerprints.
Keep the finish clean and consistent
For routine care, wipe nickel with a soft cloth and mild soapy water, rinse and dry to reduce water spots. Use only a gentle, non-abrasive metal polish when appropriate for an uncoated nickel finish.
When matching new fixtures, provide a sample or a clear daylight photo. Retail polished and brushed nickel finishes can vary in tone and grain between manufacturers.
Day to day care is simple. Wipe nickel with a soft cloth and warm water with a drop of mild dish soap, rinse and dry it so water spots do not form. A gentle non abrasive metal polish can bring back the glow on uncoated nickel once in a while.
Avoid bleach, ammonia, scouring pads and harsh bathroom cleaners. They can dull or stain the surface, and on coated parts they break down the clear layer. If a finish has worn through to the brass or steel underneath, we can strip and replate it.
Nickel Plating Gallery
Bright, satin, black and vintage nickel on cabinet pulls, slot machine trim, antique registers and marine fittings.
Decorative Metal Coatings prepares, plates and inspects nickel projects at its Oceanside, California facility. Eligible parts can be shipped from anywhere in the United States after the project and quote are confirmed.
Email photos of each part and the nickel finish you want. We reply with a written quote and lead time, often the same business day. Please wait for a quote number before you ship.
Wrap every piece on its own in bubble wrap or foam so nothing rubs, and leave three inches of padding around the contents. Keep small screws and escutcheons together in a labeled bag.
Declare the full value with your carrier and email us the tracking number so your parts are checked in the same day they arrive.
Once the nickel is finished we send photos for your approval, then pack everything in new materials and ship it back fully insured.
All nickel work is stripped, polished, plated and inspected at our own shop in Oceanside, in North County San Diego.
Nickel, chrome, copper and metal finishing in San Diego County since 1989.
Customers in Pomona can send suitable hardware, fixtures and restoration components to our Oceanside shop. We work with customers beyond the local area as well, with shipping arranged after a written quote.
Explore nickel plating information for other California communities. All work is evaluated at our Oceanside facility.
Frequently Asked Questions
Answers to common questions about nickel finishes, compatible metals, preparation and project timing for customers in Pomona and throughout California.
Yes. Parts can be sent with their existing finish. Old nickel, chrome or lacquer may be stripped in-house, and the surface is then prepared for the new finish.
Matched pieces can be evaluated and processed together to help maintain a consistent tone and sheen. A sample or clear daylight photo of the fixture you want to match is useful.
Uncoated nickel can gradually develop a light yellow haze over time. A clear topcoat or chrome over nickel may be considered when a brighter appearance with less visible change is preferred.
Decorative options include bright, satin, brushed, black and polished vintage nickel. The right choice depends on the desired appearance, base metal and condition of the part.
The service page lists steel, brass, bronze, copper, zinc die cast and aluminum, with stainless steel receiving a nickel strike. Specialty alloys are reviewed individually before work is approved.
Yes, and most of our work starts that way. We strip the old plating down to the base metal, repair what needs repair, then plate it fresh. New plating over a failing layer never lasts, so we don't do it.
We do. Along with single pieces for homeowners, we run batches of hundreds or thousands of parts for companies in California and other states. Send a photo of a sample, the quantity and the finish, and we'll quote the whole run.
Steel, stainless steel, aluminum, brass, bronze, copper, pot metal and zamak. Some of them need extra prep so the plating bonds well, and we'll tell you up front if your part does.
