Show Chrome Restoration
Triple plated in copper, nickel and chrome and buffed by hand between layers, for the deep, wet shine that makes small trim stand out on a finished build.
Our shop has been plating since 1989, and small classic parts are a favorite. Send photos, get a written price and let us do the slow work properly.
Pot metal, steel and brass handled with care
Getting ready for a show means looking closely at every small detail, because judges and other owners will. Plating that looks fine from a few feet away can show haze or pitting up close, and that is where points get lost.
Our show quality finish is built for that kind of scrutiny. Pits are filled and leveled, layers are buffed by hand, and each part is checked under bright light before it ships. If your event has a date, tell us at the start so we can talk about timing.
Club members in Newport Beach, Costa Mesa and Irvine can send photos for a free written quote. Local drop off is available at our Oceanside shop, and mail in service is there for anyone who prefers it. Standard turnaround is 3 to 5 weeks, and expedited work of 5 to 7 business days is possible when our schedule allows.
Small parts are our sweet spot, and they are easy and affordable to ship from anywhere in the country. Send a few photos, tell us what the parts came from and how you want them to look, and we will send back a written quote.
From deep show chrome to soft satin nickel, we plate the finishes that classic cars and bikes actually wore. Take a look at the services behind it, and ask if yours is not listed.
Triple plated in copper, nickel and chrome and buffed by hand between layers, for the deep, wet shine that makes small trim stand out on a finished build.
Pitted and blistered pot metal is stripped, filled and leveled in copper before it is plated. Slow, careful work that saves parts most shops send back.
Bright or satin nickel for earlier cars and motorcycles that left the factory with a softer, warmer shine than modern chrome.
Knobs, handles, window cranks, bezels and switch plates restored so the inside of your classic matches the outside.
Levers, clamps, mirror stems, small covers and controls replated so a vintage bike looks right from every angle.
Original bolts, nuts, clips and small brackets cleaned and replated, so you keep correct factory hardware instead of buying generic replacements.
Drag the handle on any photo to see the part as it arrived and as it left our shop.
Before
Bubbled, flaking chrome over pitted pot metal. Stripped, filled in copper, leveled by hand and triple plated in show chrome.
Before
A thin steel ring with surface rust and worn plating. Stripped, polished and finished in bright nickel and chrome.
Before
A coffee can full of rusty original bolts, clips and small brackets. Cleaned, sorted and replated as a matching set, ready to go back on.
See the price before you ship a thing.
Snap a few photos from different angles and tell us the finish you have in mind. You'll get a written quote and a realistic lead time. Standard work takes 3 to 5 weeks, and expedited orders are possible when the schedule allows.
Owners, shops and collectors trust us with parts that are hard or impossible to replace.
Not every part needs the same treatment. Picking the right level for each piece keeps your budget where it matters most.
Classic parts were made from a handful of metals, and each one needs its own preparation before it can shine again.
Used for door handles, hood ornaments, interior knobs and many trim pieces. We stop the pitting, fill it in copper and level it by hand before plating.
Brackets, bezels, levers and hardware. Rust is removed down to clean metal, then the part is polished and plated in copper, nickel and chrome.
Common on early vehicles, lamps and fittings. Brass takes nickel and chrome beautifully once it has been cleaned and polished.
Some trim pieces and motorcycle covers are aluminum. They need a special pretreatment before plating, so we review each piece before quoting.
Many classic trim pieces are stainless and may only need polishing. If yours does need plating, it gets a nickel strike first so the finish bonds.
Older fittings and hardware in copper or bronze clean up well and plate easily, whether you want them chromed or nickeled.
From a few photos to a finished part, the path is short and clear. This is how every classic parts job works at our shop.
Photograph each part from a few angles and tell us what it came from and the finish you want.
We check the condition and the metal, then send a written quote and lead time within 24 business hours.
You can hand deliver parts at our shop or ship them in a snug box. Dropping off is a good choice for larger pieces, so call ahead and we will be ready for you.
Old plating and rust come off, pits are filled, and the surface is leveled and polished by hand.
Copper, nickel and chrome go on in layers, then every part is inspected, packed and returned insured.
What Size Parts Make Sense to Ship
Most of the classic and vintage work that comes through our door fits in a small box. Handles, knobs, bezels, levers, brackets, hardware and short trim pieces are light, they pack easily and the shipping cost both ways stays reasonable. For owners outside California, these are the parts where mailing them to a specialty shop makes the most sense.
Larger pieces like bumpers, grilles and full length trim are a different story. We can plate them, but they need oversized boxes or freight, and the trip here and back can add up quickly. If you live in Southern California, the easiest option is simply to bring them to the shop.
If you are farther away and still want us to handle a large part, we are happy to take a look. Send photos and measurements, we will quote the plating, and you can weigh that against the shipping before you decide. No pressure either way.
A quick list of the classic and vintage parts and finishes we handle most often.
We have been restoring plated parts since 1989. Car owners, motorcycle restorers and private collectors send us the pieces they cannot replace, because we take the time to save them.
Send photos of your parts and get a no obligation quote within 24 hours.
Every restored part is backed by our craftsmanship guarantee. If something is not right, we make it right.
Small parts travel easily from any state and come back to you insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
On a classic, people look closely. Every shortcut in stripping or prep shows up later as peeling, pits or haze, so we do the slow work first.
Old chrome and nickel are fully removed, so the new layers bond to clean metal instead of a finish that is already failing.
Copper is built up and leveled by hand until pits disappear, which is what separates a show finish from a quick rechrome.
Every part is checked for haze, pits and missed spots before it is approved to leave the shop.
Each restored part is wrapped on its own, so fresh chrome never rubs against another piece on the way home.
We work with weekend owners and professional shops alike, and the finish matters just as much to both. Here are some of the groups we serve.
Antique slot machine trim, handles and casino collectibles restored to their original shine. Casino resorts across North County San Diego trust us with their decorative metal work.
Private owners and restoration shops rebuilding American and European classics, one small part at a time.
Riders and builders bringing old bikes back to original condition, or giving a custom build a clean, bright finish.
Shops that need dependable show chrome on small parts, with clear quotes and consistent quality job after job.
Owners getting ready for shows and judging who need finishes that hold up under a very close look.
Collectors of automobilia and vintage hardware who want a treasured piece to look the way it did when it was new.
After the plating, the easy part is yours
Newport Beach sits on the water, and salt air and sea spray are hard on chrome and nickel, especially near the coast. Keep a soft towel handy and make drying part of every wash, since standing water is the quickest way to dull a new finish.
Apply a coat of wax or sealant every few months to add a thin barrier between the plating and the air. If you wash the vehicle often, pay extra attention to the trim, since water collects in crevices around handles, bezels and mirror mounts.
Skip steel wool, rubbing compound and harsh wheel cleaners. They scratch the surface and can cut through the chrome to the nickel underneath. If a spot needs more than soap, use a polish made for chrome and a soft cloth. Nickel is softer than chrome, so treat nickel parts gently and always dry them well.
For storage, keep parts and vehicles somewhere dry under a breathable cover, never plastic that traps moisture. If you notice small rust spots or lifting plating, send us a photo. Catching a problem early is always easier than waiting.
Restored Parts Gallery
Door handles, bezels, cranks, levers and original hardware from classic cars and vintage motorcycles, restored in our Oceanside shop.
Pack carefully, ship insured and send us the tracking number. Here are the details, with a few tips from our receiving desk.
Send photos of every part and the finish you want. You will get a written quote and lead time, usually the same business day. Please wait for your quote number before you ship.
Wrap each part on its own so metal never touches metal, and use a box just large enough for the parts and padding. A snug box keeps parts safe and keeps the shipping cost down.
Bag and label small hardware by where it goes so sets come back together easily. Declare the real value with the carrier and email us the tracking number.
When your parts are finished we send photos for your approval, then pack them in fresh materials and ship them back insured.
Local car and motorcycle owners are welcome to drop off parts at our shop in North County San Diego. It is also the easiest option for larger pieces.
Chrome, nickel and copper restoration for classic and vintage parts since 1989.
Our shop is at 2613 Temple Heights Dr, Ste G in Oceanside. Owners in Newport Beach and nearby towns like Costa Mesa can bring parts in person, or ship them if that suits you better.
Looking at the area around Newport Beach? These pages cover nearby cities we also serve.
Frequently Asked Questions
Straightforward answers for classic car and motorcycle owners, written the way we would explain things at the shop.
Plating adds thin layers, so tight fits are worth mentioning. If your part slides, clips or threads onto something, say so when you ask for a quote, and we will plan around it.
Bring or ship them to Decorative Metal Coatings, 2613 Temple Heights Dr, Ste G, Oceanside, CA 92056. Receiving hours are Monday to Friday, 8 AM to 4 PM Pacific. Wait for your quote number before you come or ship.
It depends on the part. Some reproductions fit poorly or have never been made, and restoring your original keeps correct details. Cost depends mainly on condition, size, quantity and finish level, so a photo quote is the best way to compare.
Send a few clear photos of each part along with what it came from and the finish you want. You can use our quote request page or call (760) 746 3378. Written quotes are free and usually arrive within 24 business hours.
Yes. Shops can send photos, get written quotes and ship parts in one box. We keep each job separated and labeled, give a lead time in advance and send finished parts back insured. Tell us about your schedule at the start.
It depends on the part. Older fixtures and hardware are often better made than what you can buy today, or simply can't be found anymore. Send us photos and we'll give you an honest answer, even if that answer is to buy a new one.
Yes. We work with hotels, casinos, restaurants, architects, contractors and manufacturers, as well as homeowners. For businesses we can plate a whole project to one finish so every piece matches.
Yes. Our shop is at 2613 Temple Heights Dr, Suite G, in Oceanside. Bring your quote number and your parts during business hours, Monday to Friday 8 AM to 5 PM or Saturday 9 AM to 2 PM.