Polished Brass
A bright, reflective brass with a deep golden glow. Built over a leveled base so it shines like a solid brass piece, then sealed to keep that color.
Brass Plating for Hardware and Lighting in Eastvale, CA
Our brass plating service is designed for compatible hardware, fixtures and decorative metal details. The aim is to choose an appearance that suits the part rather than apply one treatment to every item. Suitability is confirmed after the component and its requirements have been reviewed.
Certified, Approved and Verified
A Considered Approach to Brass Finishing
Make the finish work for the piece with thoughtful preparation.
A renewed brass appearance can bring older hardware or fixtures into line with an updated product or interior. The item may be a decorative fitting, a lighting detail or another compatible metal component. The base metal, construction and condition determine whether a part can be accepted for the process.
A polished surface, a satin sheen and an antique tone create noticeably different results. Antique brass provides a deeper, aged appearance with more tonal variation than a bright polished finish. Clear finish references help reduce ambiguity when appearance is important to the project.
Each component is assessed for the preparation steps needed to support the brass finish. Depending on the item, this may involve removing old lacquer or plating, cleaning and correcting surface imperfections. The preparation plan is confirmed before production so the finish is appropriate for the component.
Because fresh brass darkens in open air, every decorative brass job ends with a clear protective lacquer unless you ask for a living finish. Send photos and tell us where the piece will live, and we will recommend a finish and send a written quote.
What We Do
Brass Plating Services
The team works from project details rather than applying a fixed process to every request. Send photographs, approximate dimensions, quantity and the base metal if it is known. Once the information is reviewed, the team can discuss options and expected scheduling.
Satin Brass
A fine brushed grain that softens the shine and hides fingerprints. The modern favorite for faucets, bath accessories and cabinet hardware.
Antique Brass
Brass that is toned darker and hand relieved, so raised details catch the light while the background stays aged. Right at home in period homes.
Brass Over Nickel
A bright nickel layer goes down first for smoothness and corrosion protection, then the brass color goes on top. Our standard build for lasting decorative work.
Brass Replating
Worn, peeling or bleeding plated brass is stripped to bare metal, repaired and plated again, so a tired piece looks like it just left the factory.
Industrial Brass
Functional brass on steel parts where rubber has to bond to metal, plus economical brass coatings on production hardware and fasteners.
Restoration Results
Before and After
Slide the handle across any photo to compare the part as it arrived with the same part finished in brass.
Before
Five Arm Chandelier
Brown, blotchy plating that had lost its lacquer years ago. Disassembled, stripped, polished and plated in bright brass, with every arm matched before it was sealed and rewired.
POLISHED BRASS
STEEL
LACQUERED
Before
Bath Accessory Set
Dated chrome towel bars, hooks and a paper holder. Converted to satin brass so the whole set agrees with a new satin brass faucet installed in the same room.
SATIN BRASS
ZINC DIE CAST
COLOR MATCH
Before
Bar and Lounge Rail
A rail section from a hospitality lounge, worn through to the base metal where guests rest their hands. Stripped, rebuilt, polished and plated in bright brass.
POLISHED BRASS
STEEL
HOSPITALITY
Choosing a Warm Finish
Brass, Gold or Copper?
All three bring warmth to a room, but they differ in color, upkeep and cost. Here is how they compare so you can pick the one that fits your project.
Brass Plating
- Classic golden yellow tone
- Polished, satin or antique
- Sealed with clear lacquer
- Easy to match across a set
- The best value for a gold look
Gold Plating
- Richer, deeper yellow color
- Does not tarnish like brass
- Jewelry, awards and accents
- Higher cost per piece
- Ideal for small, special items
Copper Plating
- Rosy, reddish brown color
- Bright, satin or antique
- Ages to a natural patina
- Rustic and industrial designs
- See our copper finishes
What We Can Finish
Metals We Brass Plate
Brass can go on almost any common metal, but every base needs its own cleaning and its own foundation layer to hold a lasting golden finish.
Steel
Cleaned, activated and given a smooth nickel base before brass. Rust and pitting are removed first so the golden surface comes out even.
Zinc Die Cast
Most modern faucets, pulls and bath accessories are die cast. They need a careful copper strike and leveling before brass, work we do every week.
Solid Brass
Old lacquer and tarnish are stripped, then the part is polished. Many solid brass pieces only need refinishing, others get a fresh plate for an exact color.
Aluminum
A zincate pretreatment and a strike layer let brass bond to aluminum castings and housings that would otherwise reject plating.
Stainless Steel
A nickel strike breaks through the natural oxide film, after which stainless takes a brass finish with a very durable core underneath.
Copper and Bronze
Copper and bronze accept brass well once cleaned. Unusual alloys and plated plastics are reviewed case by case, so send a photo before you ship.
Who We Serve
Where Our Brass Shines
Decorative brass can be relevant to renovation and product-design work connected with Eastvale. These are general examples of possible applications, not claims of local installations or customers. The service is evaluated according to the item, its substrate and the desired finish.
Casinos and Gaming
Table rails, slot cabinet trim, cashier cage details and bar fixtures in polished or satin brass. Casino resorts across North County San Diego trust us to keep their gaming floors glowing.
Lighting and Interior Design
Chandeliers, sconces, lamp bases and decorative accents finished to a designer's specified brass tone.
Bath and Kitchen Fixtures
Faucets, shower trim, towel bars and kitchen accessories converted to brass so every piece in the room matches.
Furniture and Cabinetry
Drawer pulls, hinges, legs, ferrules and escutcheons for new furniture lines and antique pieces alike.
Architectural Hardware
Door levers, kick plates, handrails and signage for homes, hotels, offices and commercial lobbies.
Industrial Manufacturing
Brass coated steel inserts and brackets that let rubber bond to metal, plus production hardware runs.
How It Works
Our Brass Plating Process
Before work is approved, the team considers the substrate, visible condition and finish reference. Preparation may include removing previous coatings, cleaning and correcting surface imperfections when needed. The completed work is inspected for appearance and consistency before it is prepared for return.
1
Share Photos
Send pictures of the part and, if you can, a photo of the brass piece it needs to match.
2
Approve a Quote
We identify the base metal and the prep it needs, then send a written price within 24 business hours.
3
Deliver the Parts
For a coordinated set, photograph the components together before wrapping them individually. Use suitable cushioning to prevent rubbing or impact during transit, protect delicate edges and include a parts list with the preferred finish reference. Contact the team for project-specific packing instructions.
4
Prepare and Plate
Old finishes are stripped, the surface is polished and leveled, then a nickel base and brass go on.
5
Tone, Seal and Return
Brass is polished, brushed or antiqued, lacquered, inspected and shipped back insured.
One Piece or a Thousand
Big order or a single knob, same care.
Homeowners send us one faucet. Companies in and out of state send production runs of hundreds or thousands of parts. Both get a written quote and the same inspection before anything ships back.
What Our Clients Say
Trusted by Professionals
Homeowners, designers and hospitality teams share what it was like to send their brass and other finishing work to our shop.
35+
Years of Expertise
Take a Moment to Learn More
About Decorative Metal Coatings
Since 1989 our Oceanside shop has helped homeowners, designers and casino resorts get brass that matches, from a single heirloom lamp to hundreds of pieces of hotel hardware.
Free Estimates Available
Email a photo of your brass project and get a no obligation quote within 24 hours.
Quality Guaranteed
Each piece is backed by our craftsmanship guarantee. If the finish is not right, we make it right.
Nationwide Shipping
Customers in every state ship brass work to us, from one lamp to a full hotel order.
Fast Turnaround Times
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Our Commitment
Brass That Stays Beautiful
A brass finish is only as good as the layers under it and the seal on top of it. Here is what goes into every order.
Solid Foundation
Brass goes over a polished nickel base, which gives it depth and keeps the base metal protected if the surface is ever scratched.
Matched Side by Side
When you send a sample, finished parts are checked next to it under shop light before they are approved.
Lacquer Done Right
Parts are cleaned of every fingerprint before the clear seal goes on, so no spots appear under the coating months later.
Careful Packing
Each finished piece is sleeved in soft wrap and boxed apart from the others so lacquered surfaces arrive unmarked.
What We Do Differently
- We match tone and sheen to a sample you send
- Old plating and lacquer are fully stripped first
- Every decorative brass part gets a nickel base
- We send photos when a color decision is needed
- Sets are plated together so every piece agrees
What You May Experience Elsewhere
- Brass sprayed or painted on instead of plated
- No nickel base, so the color fades and wears fast
- Mismatched tones within the same set of hardware
- Unsealed brass that darkens within a few weeks
- Fingerprints trapped under the lacquer
Brass Plating Catalog
Brass Finishes and Services
Every brass finish and brass related service we offer under one roof.
Decorative Brass
- Polished Brass
- Bright Brass
- Satin Brass
- Brushed Brass
- Antique Brass
- Aged and Toned Brass
- Clear Lacquer Topcoat
Restoration and Matching
- Brass Over Nickel
- Brass Replating
- Lacquer Stripping and Resealing
- Chrome to Brass Conversion
- Sample Color Matching
- Matching Hardware Sets
Base Metals and Industrial
- Steel
- Stainless Steel
- Zinc Die Cast
- Aluminum (Zincate)
- Copper and Bronze
- Rubber Bonding Brass
- Production Hardware Runs
Caring for Brass-Plated Parts in Eastvale
Preserve the surface with gentle cleaning and regular care.
Regular dusting with a soft cloth helps prevent loose particles from scratching the finish. Avoid scouring pads, abrasive powders and strong metal polishes that can damage the lacquer.
If the finish changes unexpectedly, request guidance before using a stronger cleaner. Harsh chemicals and abrasive cleaners may scratch the surface or change its sheen.
Bath and kitchen pieces see the most wear. Wipe off water spots and soap residue before they dry, and avoid spraying bathroom cleaners directly on the hardware. On casino and hospitality pieces that are cleaned many times a day, ask us about a schedule for resealing before the base metal ever shows.
Prefer brass that ages? We can leave a piece unsealed so it darkens naturally, and you can polish it back whenever you like. When a lacquered piece starts to show spots, send it back: in many cases we strip the old lacquer, rebuff the brass and reseal it without replating.
Project Gallery
Brass Plating Gallery
Polished, satin and antique brass on chandeliers, bath sets, bar rails and furniture hardware for homes, hotels and casino resorts.
Nationwide Service
Ship Us Your Parts From Anywhere in the US
Shipping eligible projects to our shop
01
Get your quote first
Email photos of every piece and the brass finish you want. We reply with a written quote and lead time, often the same business day. Please wait for a quote number before you ship.
02
Protect every surface
Wrap each part separately in bubble wrap or foam so no two pieces touch, and leave at least three inches of padding around them. Glass shades and electrical parts should be removed first.
03
Insure and send tracking
Declare the full value with your carrier and email us the tracking number, so we can watch for your box and log it in on arrival.
04
Approve, then receive
When your brass is finished we send photos for approval, then pack every piece in new materials and ship it back insured.
Visit Us
Our Location
All brass work is stripped, plated, toned, lacquered and inspected in our own facility in North County San Diego.
Decorative Metal Coatings
Brass, copper, nickel, chrome and metal finishing in San Diego County since 1989.
- Address 2613 Temple Heights Dr, Ste G, Oceanside, CA 92056
- Phone (760) 746 3378
- Quotes Send photos and get a price
Business Hours
- Monday to Friday 8:00 AM to 5:00 PM
- Saturday 9:00 AM to 2:00 PM
- Sunday Closed
Decorative Metal Coatings, based in Oceanside
The shop is based in Oceanside, California. Eligible metal parts can be shipped from anywhere in the United States after the project has been reviewed. Pack items individually, protect corners and fragile details, and confirm shipping and return arrangements with the team.
Nearby Cities We Serve
Related city pages in our California directory include:
Helpful Brass Plating Answers for Eastvale
Frequently Asked Questions
Find practical details about brass finishes, estimates, handling and production schedules.
Yes. The substrate, construction and existing surface affect suitability and preparation. Share the material if known and provide photos of the front, back and any damaged areas.
It may be an option for parts that are still structurally useful but have an outdated surface. The team reviews the material and condition before recommending a process.
Send a physical sample when practical or photographs taken in neutral lighting. Identify whether you prefer polished, satin or antique brass and note any matching requirements.
Include clear images, dimensions, quantity, material information and the desired finish. Quotes typically take 24 to 48 hours once the necessary details are received.
Decorative Metal Coatings is based in Oceanside, California. Eligible parts can be shipped from anywhere in the United States after the project has been reviewed.
Yes, and most of our work starts that way. We strip the old plating down to the base metal, repair what needs repair, then plate it fresh. New plating over a failing layer never lasts, so we don't do it.
We do. Along with single pieces for homeowners, we run batches of hundreds or thousands of parts for companies in California and other states. Send a photo of a sample, the quantity and the finish, and we'll quote the whole run.
Steel, stainless steel, aluminum, brass, bronze, copper, pot metal and zamak. Some of them need extra prep so the plating bonds well, and we'll tell you up front if your part does.