Bright Copper
A deep, mirror polished copper finish for lighting, hardware and decorative pieces, sealed with a clear coat so the color stays rich instead of darkening.
Copper Plating in Chino Hills, CA
Copper plating in Chino Hills for owners of hillside homes, horse properties along the trail network and the shops in the town center. Ship your lanterns, door sets or barn hardware to our Oceanside shop, and we'll plate them in copper and insure them home.
Certified, Approved and Verified
Copper Plating Services in Chino Hills
Rolling hills that stayed mostly green.
Chino Hills incorporated in 1991 and kept a lot of its open land, including a large state park of grassy ridges and oak canyons. Homes sit on the slopes, many with horse facilities and long views. Fire season, Santa Ana winds and strong sun all wear exterior finishes faster than in the flats.
Hillside hardware asks more of the prep crew. Wind pits one face, sun bakes another and ash from fire season settles into seams. We strip each piece fully, buff the weathered side until it matches the sheltered side and clean out every seam. When the base is uniform, the copper comes out uniform too.
Custom homes in the hills often have heavy entry sets and lanterns that came from specialty suppliers years ago. Refinishing keeps them, instead of chasing a match that may not exist anymore.
Tell us what the part is and what you want it to become. Send a few photos and the base metal if you know it, and we will recommend the right copper process, explain the preparation it needs and send back a written quote.
What We Do
Copper Plating Services
Antique copper looks at home on ranch and Mediterranean houses, satin keeps entry hardware tidy and bright copper makes interior lighting sparkle. A clear coat or natural patina finishes it. Nickel bound steel parts can get a copper base first.
Satin Copper
A brushed, low glare copper with a soft grain. It hides fingerprints and light wear, a favorite for door hardware, cabinet pulls and interior trim.
Antique Copper
Copper that is darkened and then relieved by hand, so the high points glow while recesses stay deep brown. Ideal for period restorations and rustic designs.
Copper Buff Base
A heavy acid copper layer that is cut and buffed flat before nickel and chrome. It fills pits and polishing marks and is the foundation of every show chrome job.
Copper Strike
A thin first layer that locks onto difficult metals like zinc die cast, steel and brass, giving every layer that follows a solid bond.
Industrial Copper
Functional copper for conductivity, solderability and heat treat masking. Plated to a specified thickness on bus bars, connectors, shafts and gears.
Restoration Results
Before and After
Drag the handle on any photo to see the part as it arrived and as it left the shop in copper.
Before
Vintage Table Lamp
Worn, spotted brass with decades of tarnish. Stripped, polished and plated in bright copper, then sealed with a clear lacquer so the warm color stays put.
BRIGHT COPPER
BRASS
LACQUERED
Before
Antique Door Hardware
A full set of levers, plates and hinges with peeling plating. Stripped, copper plated and hand antiqued so the raised details stand out against darker recesses.
ANTIQUE COPPER
STEEL
SET MATCH
Before
Copper Base for Chrome
Pitted metal with failed chrome. Stripped down, built up in heavy acid copper, then cut and buffed flat to create a perfect base for nickel and chrome.
COPPER BUFF BASE
STEEL
SHOW CHROME PREP
One Piece or a Thousand
Big order or a single knob, same care.
Homeowners send us one faucet. Companies in and out of state send production runs of hundreds or thousands of parts. Both get a written quote and the same inspection before anything ships back.
What We Can Finish
Metals We Copper Plate
Copper bonds to more base metals than almost any other plating, but each one still needs the right cleaning and the right first layer.
Steel
Cleaned and activated, then given a copper strike before the main copper layer. Rusted or pitted steel is stripped and copper filled until the surface is smooth.
Brass and Bronze
Plate beautifully once cleaned. A common way to give brass lighting, hardware and fixtures a true copper color without replacing the part.
Zinc Die Cast and Pot Metal
Porous and reactive, so it needs a gentle copper strike before anything else. Pits are copper filled and hand buffed flat, the slow work most shops avoid.
Aluminum
Receives a zincate pretreatment so copper can bond to a surface that would otherwise oxidize instantly. Used for wheels, housings and decorative castings.
Stainless Steel
Its oxide layer resists bonding, so it gets a nickel strike first. After that it takes copper like any other metal, for a warm look on a durable base.
Copper and Specialty Alloys
Solid copper can be replated to restore its surface, and other alloys are reviewed case by case. Send the alloy or a photo and we will confirm before you ship.
Choosing the Right Copper
Three Ways We Use Copper
The same metal, three different goals. Knowing which one your part needs decides how it is prepared, how thick the copper goes on and how it is finished.
Copper as the Finish
- Bright, satin or antique look
- Sealed with clear lacquer
- Lighting, hardware and decor
- Color matched to a sample
- Judged by appearance
Copper Under Chrome
- Heavy layer, buffed flat
- Fills pits and polishing marks
- Covered by nickel and chrome
- Bumpers, trim and wheels
- Judged by the final chrome
Functional Copper
- Conductivity and solderability
- Heat treat stop off masking
- Plated to a set thickness
- Bus bars, contacts, gears
- Judged by spec and coverage
How It Works
Our Copper Plating Process
Pictures and a sentence about the look, sent by email, are all we need to price it in writing for you, with no commitment.
1
Send Photos
Show us the part and tell us the finish you want: bright, satin, antique or a base for chrome.
2
Get Your Quote
We confirm the base metal and the prep it needs, then send a written quote within 24 business hours.
3
Ship or Drop Off
Ash and soot from past fire seasons can cling to Chino Hills exterior pieces. We wash it away, then strip, buff and inspect under raking light before the strike and copper.
4
Strip, Strike and Plate
Old finishes come off, the surface is repaired and polished, then struck and plated in copper.
5
Finish and Seal
Parts are buffed, brushed or antiqued, sealed when needed, inspected and shipped back insured.
Copper Plating Catalog
Copper Finishes and Services
Every copper finish and copper related service we run in house.
Decorative Copper
- Bright Copper
- Polished Copper
- Satin Copper
- Brushed Copper
- Antique Copper
- Oil Rubbed Copper
- Clear Lacquer Topcoat
Underlayer and Industrial
- Copper Buff Base for Chrome
- Acid Copper Leveling Layer
- Copper Strike
- Conductive Copper
- Copper for Soldering
- Heat Treat Stop Off Copper
Base Metals and Prep
- Steel
- Stainless Steel
- Brass and Bronze
- Zinc Die Cast
- Aluminum (Zincate)
- Stripping and Replating
- Masking for Selective Plating
- Custom Sample Match
What Our Clients Say
Trusted by Professionals
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Who We Serve
Who Relies on Our Copper
Hillside homeowners, horse property owners, builders, designers and town center businesses all send work, from a single knocker to whole properties.
Casinos and Gaming
Slot machine trim, table rails, bar fixtures and gaming floor accents in bright or antique copper, made to glow under bright lights around the clock. Trusted by casino resorts across North County San Diego.
Lighting and Decor
Pendants, sconces, lamp bases and accessories finished in bright, satin or antique copper.
Architectural Hardware
Door handles, hinges, cabinet pulls and railings given a warm copper finish that matches across a project.
Hospitality
Bar rails, foot rests, tap handles and restaurant fixtures that bring copper warmth to a space.
Electrical Components
Bus bars, terminals and connectors plated for conductivity and easy soldering.
Manufacturing and Heat Treat
Gears, shafts and steel parts selectively copper plated to mask areas during carburizing.
35+
Years of Expertise
Take a Moment to Learn More
About Decorative Metal Coatings
We have been running copper tanks since 1989. Restorers, designers, builders and manufacturers send us parts because the copper work underneath is what makes the finish on top last.
Free Estimates Available
Send a photo of your part and receive a no obligation quote within 24 hours.
Quality Guaranteed
Every part leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
Ship From Anywhere in the US
A single fixture or a full production run, shipped to us from any state and returned insured.
Fast Turnaround Times
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Our Commitment
Copper Done the Right Way
Copper shows everything. Every scratch left in the base metal and every shortcut in the prep ends up visible in the finish, so we do not take shortcuts.
Proper Strike Layer
Difficult metals get the right first layer before the main copper goes on, so the finish stays bonded and does not peel or blister.
Hand Buffed
Copper is cut and buffed by hand between stages, which is what gives decorative copper its depth and chrome its flawless base.
Color Checked
Finished copper is inspected for even color, gloss and texture, and matched to your sample when you send one.
Packed to Protect
Soft copper scratches easily, so every finished piece is wrapped separately and packed to arrive exactly as it left the shop.
What We Do Differently
- We confirm the base metal before choosing the copper process
- Old plating is stripped instead of covered over
- Decorative copper is sealed so the color lasts
- We send photos when a part needs a decision from you
- Every order is inspected before it is packed
What You May Experience Elsewhere
- Copper plated straight over old, failing finishes
- No strike layer, leading to peeling and blistering
- Unsealed copper that turns brown within weeks
- Polishing marks left visible under the finish
- Little communication once parts are in the shop
Copper Care Tips for Chino Hills
Ridge winds and long summer sun.
Hillside copper in Chino Hills sees more wind and sun than copper down in the valley. Rinse off dust and ash with water, then dry it. Inside, sealed copper keeps well with a microfiber cloth and the odd soapy wipe.
Bare copper up here goes brown quickly and rarely turns green, since the air is dry. That warm brown suits ranch and Mediterranean homes. Keep the lacquer up on pieces you want bright, especially on west facing walls.
If you prefer a living finish, we can leave the copper unsealed so it develops its own patina over time. That choice works well on rustic lighting, garden pieces and bar tops where the aging is part of the character.
When a lacquered piece starts to show dark spots, the coating has failed somewhere. Bring it back and we can strip the old lacquer, rebuff the copper and seal it again, usually without replating the whole part.
Project Gallery
Copper Plating Gallery
Bright, satin and antique copper on lighting, hardware and hospitality pieces, plus functional copper for electrical and industrial work.
Nationwide Service
Ship Us Your Parts From Anywhere in the US
Remove lantern glass, wrap heavy entry sets well and pack the box so nothing shifts.
01
Quote before you ship
Send photos of every piece and the copper finish you want. You receive a written quote and lead time, usually the same business day. Always wait for a quote number before shipping.
02
Wrap every piece on its own
Wrap each part individually so metal never touches metal, and use at least three inches of padding on every side. Long trim and lighting arms should be double boxed.
03
Insure it and share tracking
Declare the real value with the carrier and email us the tracking number so we can log your parts the day they arrive.
04
Inspected, then shipped back
When the copper work is done we photograph the finished pieces for your approval, then pack them in fresh materials and ship them back insured.
Visit Us
Our Location
Every copper job is stripped, plated, buffed and inspected in our own facility in North County San Diego.
Decorative Metal Coatings
Copper, nickel, chrome and metal finishing in San Diego County since 1989.
- Address 2613 Temple Heights Dr, Ste G, Oceanside, CA 92056
- Phone (760) 746 3378
- Quotes Send photos and get a price
Business Hours
- Monday to Friday 8:00 AM to 5:00 PM
- Saturday 9:00 AM to 2:00 PM
- Sunday Closed
Shipping from Chino Hills
Up in the hills or not, parcels from Chino Hills usually reach our shop by ground in 1 business day. We insure every return trip.
Nearby Cities We Serve
Chino Hills sits between the valley and Orange County, near these cities:
Why Chino Hills Customers Choose DMC
Frequently Asked Questions
Chino Hills homeowners on the slopes often ask us about these things.
Yes. Ash and soot wash away during cleaning, and the old finish strips off with it. Underneath, the metal is usually sound. We buff it, add a strike and plate fresh copper. If heat damaged the metal, we'll point that out from your photos.
Pieces on the slopes take wind, sun and ash unevenly, so one side wears much faster than the other. We strip and buff until both sides match before plating. Skipping that would leave a copper finish that looks blotchy in daylight.
It's a great match. Antique copper looks natural against stucco, tile roofs and dark wood doors, and it hides dust well. Many owners use it on lanterns and entry hardware, then let it deepen gradually with the sun and seasons.
Decorative and light duty pieces like hooks, latches and barn lanterns plate well after rust removal and a strike. Anything that holds a horse or carries real load should be checked by a builder or farrier after it's reinstalled.
Yes. In dry air, bare copper tends to darken to brown and stay there, rather than turning green. Green patina needs steady moisture. You might still see some green near sprinklers or in shaded, damp corners over many years.
Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.
Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.
Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.