Deburring
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
From Oro Valley to Tucson and beyond, buckles, tags and small goods can ship to our Oceanside shop and come back finished. We run a sample first, then the full batch, and your buckles and tags return insured and packed by part number.
Done by people who check every batch of buckles, tags and small goods
Tumbling isn't right for everything, and we'll say so. A handful of large or delicate pieces is often better done by hand, and we'd rather tell you that than run a batch that doesn't suit the buckles, tags and small goods. It's one reason you can trust the quote when you write from Tucson or Oro Valley.
When tumbling is the right call, it saves real money. Many pieces finish at once, every one gets the same treatment, and the cost per part falls as the count goes up.
Send photos, the metal type and a count from Tucson. We'll tell you which way we'd go and why, in writing, with no obligation. If a sample run makes sense first, we'll suggest that too.
Not sure which finish your parts need? Send photos, a part count and what the parts are used for. We will suggest a finish, run a few samples if needed, and send back a written quote.
Tumbling does more than one job. For buckles, tags and small goods it can clean, smooth, brighten or age the metal, and we pick the treatment that gets you a bright burnished shine.
Burrs and sharp slivers left by machining, stamping or casting are worn away evenly, so parts are safe to handle and ready for assembly or plating.
Sharp corners are gently rounded and tool marks are softened. Parts feel better in the hand and plating covers edges more evenly.
Steel media presses the surface smooth instead of cutting it, bringing up a bright, clean shine on brass, copper and steel without buffing each piece.
A soft satin surface with worn, rounded edges that looks naturally aged. Popular on brass hinges, pulls, knobs and small decorative castings.
Tumbling first removes scale, light rust and surface marks, so copper, nickel or chrome goes on smoother and the finish looks better for less cost.
Plated or darkened parts are tumbled lightly so the high points wear through and glow, giving hardware a used, lived in character.
Drag the handle across each photo to see parts as they went into the tumbler and as they came out.
Before
Rough castings with parting lines and a dull, uneven skin. Tumbled in stages to smooth the surface and soften the edges into an even satin glow.
Before
Fresh off the machine with burrs, sharp corners and cutting oil. Deburred, edge smoothed and dried spot free, ready to go straight to plating.
Before
Bright, brand new brass that looked out of place in an old home. Darkened and tumbled so the edges wear back to brass, like decades of use.
Big order or a single knob, same care.
Homeowners send us one faucet. Companies in and out of state send production runs of hundreds or thousands of parts. Both get a written quote and the same inspection before anything ships back.
From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.
Each method has its place. The right one depends on how many parts you have, their shape and the look you want.
The small pieces that tumble with your parts decide how much metal is removed and how the surface looks. We choose them part by part.
Heavy and abrasive. Used to take down burrs, casting skin and tool marks on steel, stainless and other hard metals.
Lighter and gentler, so it smooths brass, aluminum and zinc without cutting too deep or rounding details away.
Fine and dense. It cuts very little and leaves a smooth, bright surface ready for plating or a final polish.
Pins, balls and small shapes that press the surface smooth rather than wearing it away, bringing up a bright shine.
Dry natural media used with polishing compound for a soft luster, and to dry parts without water spots.
The liquid in the tumbler cleans, protects parts from tarnish while they run and helps control how bright the finish turns out.
Getting a bright burnished shine on buckles, tags and small goods takes six steps, and you only handle the first two.
Tell us what the parts are, how many you have and the finish you are after.
Pack each part number of your buckles, tags and small goods in its own labeled bag and ship the box to Oceanside once you have your quote number. Insure the buckles and tags for their real value and email us the tracking number.
We tumble a few pieces first so you can see and approve the finish before the full batch.
Parts run with the media and cycle time dialed in from the sample, in stages when needed.
Every batch is rinsed, dried spot free and checked for lodged media and missed burrs.
Parts move on to plating or patina, or are packed by part number and shipped back insured.
Hard metals and soft metals behave very differently in a tumbler. Each gets its own media and cycle time.
Take a beautiful satin or burnished finish and are the go to metals for the decorative tumbled look on hardware and castings.
Deburred and smoothed with cutting media, then rinsed and dried quickly so the bare steel does not flash rust before plating.
Tough enough for aggressive media. Tumbling gives stainless an even satin or bright burnished look without hand polishing.
Soft and easy to over process, so it runs with lighter media and shorter cycles to protect details and dimensions.
Soft castings with fine detail. Gentle media removes parting lines and flash without rounding off the design.
Light tumbling over plating creates a worn antique look. We review these first, since too much time cuts through the finish.
Since 1989 we have finished metal for manufacturers, designers and restorers. Tumbling, plating and patina all happen under one roof, so your parts go from rough to finished without changing hands.
Send photos and a part count and receive a no obligation quote within 24 hours.
Every batch leaves our shop backed by our craftsmanship guarantee. If you are not satisfied, we make it right.
Small parts in bulk ship easily and affordably. Send a box from any state and get it back insured.
Most projects are completed within 3 to 5 weeks. Expedited Orders: 5 to 7 business days. Contact us for availability.
Everything we do in the tumbler, the finishes it creates and the services that often follow.
Tumbling looks easy from the outside. Getting the same result on hundreds of parts without damaging a single one takes care.
A few parts are run and approved before the full batch, so there are no surprises when the rest come out.
Media size and type are matched to the metal and the holes in each part, to avoid lodging and over cutting.
Finished parts are checked for leftover burrs, stuck media and water spots before they are packed.
Different parts are run and packed separately and labeled the way you sent them, ready for your stock shelf.
Hardware, lighting, production parts and small goods buckles, tags and small goods included, all go through our tumblers. Here's the breakdown, with buckles and tags in mind.
Small brass trim, table hardware, rail fittings and decorative accents finished in matching batches, so replacement pieces blend in with the rest. Trusted by casino resorts across North County San Diego.
Hinges, pulls, knobs and escutcheons with a soft tumbled finish that matches across an entire home or project.
Production parts deburred and smoothed in volume, ready for plating, coating or assembly.
Furniture makers use tumbled hardware for a warm, hand finished look on cabinets, chests and tables.
Small lamp parts, finials, canopies and fittings given an even finish before plating or patina.
Buckles, keychains, tags and other small metal goods finished in batches for makers and growing brands.
Pack buckles, tags and small goods right and we'll do the rest
Write down any holes, slots or threads on your buckles, tags and small goods. Media can wedge into openings close to its own size, so we pick a shape and size that stays clear of the openings on buckles and tags, and we check every finished piece for anything stuck.
If any of your buckles, tags and small goods have a thread or a tight fit that has to stay exact, mention it when you ask for a quote from Tucson. Tumbling takes very little metal off buckles and tags, but we'd rather plan for it than guess.
Point out holes, slots and threads. Media can wedge into openings that are close to its size, so we pick a media shape and size that stays clear of them. Telling us the hole sizes up front saves time for everyone.
Finally, let us know what happens next. Parts that will be plated get a different finish than parts that will be lacquered or left bare, and parts headed for an assembly line can be packed the way your team needs them.
Tumble Finishing Gallery
Hardware, castings and production parts deburred, smoothed and tumbled in our Oceanside shop.
Small metal parts like buckles, tags and small goods travel well when they're packed right. Here's how to send a box of buckles and tags from Tucson to our Oceanside shop.
Send photos, the metal type and a part count. You will get a written price and lead time, usually the same business day. Please wait for your quote number before shipping.
Keep each part type in its own labeled bag. Mixed parts take longer to sort and hard pieces can mark softer ones on the way here.
Small parts are heavy, so use a strong box and fill the empty space. Insure the box for its real value and email us the tracking number.
We send photos of the sample or finished batch when needed, then pack everything by part number and ship it back insured.
Local shops and makers are welcome to drop off parts for tumbling at our facility in North County San Diego.
Tumble finishing, plating and patina under one roof since 1989.
Tucson is in the Sonoran Desert of southern Arizona, and with very dry air and hot summers with a touch of monsoon humidity, we make sure steel is dried quickly and finished parts are packed dry. Send photos of the buckles, tags and small goods to start, then ship once your quote number arrives.
We also serve other towns around Tucson, like Marana, and their pages are listed here.
Frequently Asked Questions
Before you ship a box of buckles, tags and small goods from Tucson, you probably have a few questions. These answers cover the ones that come up most often for buckles and tags.
Yes. Our process doesn't change by location, so shipping buckles, tags and small goods from Oro Valley, Marana or Tucson follows the same steps: photos, a quote number, labeled bags, a strong insured box and a tracking number sent by email.
It depends on where they'll live. With very dry air and hot summers with a touch of monsoon humidity in your area, a clear lacquer can help buckles, tags and small goods keep a bright burnished shine longer. If your buckles and tags will be handled a lot or sit outdoors, we recommend sealing them.
We choose by metal. Ceramic cuts fast on hard metals, plastic is gentler on brass, aluminum and zinc, porcelain leaves a fine smooth surface, and stainless steel shapes burnish, so we match the media to your buckles, tags and small goods. For buckles and tags, walnut shell and corn cob handle dry finishing and drying when it's needed.
Yes. Hard and soft parts never share a load, and each part number of buckles, tags and small goods is run, bagged and labeled on its own. When the batch is done, your buckles and tags are packed by part number and shipped back insured.
Yes, when the media fits the metal. Soft metals like aluminum, zinc and brass run with lighter media and shorter cycles so details and dimensions on buckles, tags and small goods are protected. We keep hard and soft parts in separate loads, because heavy pieces can ding and scratch softer buckles and tags.
Send us a few photos of the part from different angles, along with what it is and the finish you want. We look them over and send a written quote, usually within 24 business hours. It's free, and you're under no obligation to go ahead.
Standard orders take 3 to 5 weeks from the day your parts arrive. If you're on a deadline, ask about expedited service. When the schedule allows, we can finish in 5 to 7 business days.
Yes. Our workmanship is covered for 12 months. If something isn't right with the finish we put on, call us and we'll make it right.