Skip to content

Metal Plating in Gadsden, AL

From steel town grit to a mirror finish.

Mantels, lamps, hardware, tools and keepsakes in Gadsden have been handled and worn for decades, and plating can bring them back. We strip the old finish, repair the damage and rebuild the surface in layers. We have worked this way since 1989 and cover every job for 12 months.

Send a photo... get a price
Certified, Approved and Verified

Professional Metal Plating for Gadsden Businesses

Built to last in Etowah County, finished to look it.

Gadsden grew up around steel and rubber, and plenty of people here still hold on to tools, hardware and equipment built to outlast them. Some of that metal is rusty, pitted or dull. With the right prep, a lot of it can be saved instead of replaced.

Broad Street and the older neighborhoods have homes full of original door hardware, lamps and bath fixtures. Lake life on Neely Henry and the trails near Noccalula Falls add boat parts, trailer trim and outdoor pieces. We work on all of it, one piece or a full order.

Our approach is simple. We look at what you have, tell you what it needs and put the price in writing. You decide with the full picture in front of you, and nothing starts until you say yes. Send a couple of photos and we take it from there.

What We Do

Plating Services in Gadsden

People in Gadsden often ask about nickel and chrome for tools and trim, brass for fixtures, polishing for old metal that has dulled, and powder coating for gates, rails and outdoor pieces. Silver and patinas come up for family keepsakes.

Metal Plating Done Right for Gadsden

Metal with a story, built back to shine.

A shipping box works best for small, dense pieces: handles, hinges, lamp bases, tools, emblems and fittings. They travel safely and cost little to send. Before plating, we remove rust and old coatings, repair pits and rebuild the surface so the new finish does not hide old damage.

Alabama summers bring humidity, heat and heavy rain, and all three are hard on bare metal. For anything that sits outside, we talk through sturdier options such as powder coating. For indoor pieces, the finish is chosen to suit the room and the pieces around it.

One Piece or a Thousand

Big order or a single knob, same care.

Homeowners send us one faucet. Companies in and out of state send production runs of hundreds or thousands of parts. Both get a written quote and the same inspection before anything ships back.

Tap to add photos (up to 5). JPG, PNG, WEBP or iPhone HEIC.
    How It Works

    From Gadsden to Our Shop

    Getting your Gadsden parts to us takes a few simple steps, and the written quote comes before anything ships.

    01

    Get your quote first

    Send photos of every part with a short description. We reply with a written quote and a lead time, usually the same business day. Never ship before you have a quote number.

    02

    Pack it like it will be dropped

    Wrap each piece individually, keep metal from touching metal, and use at least three inches of padding on every side. Double box long trim and bumpers.

    03

    Insure and send the tracking

    Ship with any carrier, insure the box for what the parts are worth to you, and email us the tracking number so we know it is on the way.

    04

    Approve, then we ship back

    We send photos when the work is done. Once you approve and pay, your parts go back to you packed the same careful way.

    What Our Clients Say

    Trusted by Professionals

    From custom builders to industrial manufacturers, our clients trust us to deliver the same result every time.

    Where We Are

    Our Location

    One shop, one set of tanks and one inspection standard. Every part from Gadsden is plated in this building.

    Decorative Metal Coatings

    Southern California's metal plating and finishing shop since 1989.

    Business Hours

    • Monday to Friday 8:00 AM to 5:00 PM
    • Saturday 9:00 AM to 2:00 PM
    • Sunday Closed
    Map showing the facility in Oceanside, CA
    Get directions Call us now

    Sending metal from Gadsden to Southern California

    We work from Oceanside, California, and Gadsden customers use ground carrier to send parts. Pack each Gadsden piece in its own padding, insure the box and send us the tracking number. Ground usually takes 3 to 5 days, and we ship finished work back insured.

    Nearby Cities We Serve

    More of Alabama we plate for:

    Decatur Huntsville Birmingham Auburn Hoover

    Common Questions from Gadsden Customers

    Frequently Asked Questions

    Straight answers for people in Gadsden and Etowah County.

    Get a free quote

    For pieces you care about, yes. A box of hardware costs little to ship, and the quote tells you the plating price up front. You can add up both costs before sending anything, and decide with real numbers in hand.

    Do not scrub or sand them. Rust and old finish get stripped on our end. Wrap each piece in paper or cloth so edges do not scratch each other, then add padding around the group and a packing list on top.

    Often yes. Hand tools, hinges, latches and shop hardware plate well when the metal is sound. We check for cracks and heavy pitting first, and we tell you honestly if a piece is not worth the cost before you pay for anything.

    Yes. Give us the address you want, and tell us if someone else will sign for the box. Everything ships insured with tracking, and we email you the number the day it leaves so you can plan around delivery.

    Send them as they are and tell us what is missing. We can usually reuse the hardware you have and plate it with the part. Photos of how it comes apart help, and we keep the pieces together when they return to you.

    Not at all. Most of what comes through our door is home and business hardware: faucets, light fixtures, door handles, cabinet pulls, railings and decorative pieces. We also work for hotels, restaurants, boat owners and manufacturers.

    Tell us what the part is, roughly how big it is, how many pieces you have and the finish you're after. If you know the metal, mention it. If not, that's fine. We can usually tell from the photos.

    Every part is quoted on its own. The biggest factors are condition, the base metal, size and shape, the finish you choose and how many pieces you send. A part with deep pits or broken spots takes more work before it can be plated.